Press Machines

Show previous products

• 

  REMS REMS pressing jaw pressing tongs 2x Standard V 12 ( 2x 570107 ) for radial presses ( except Mini-Press )

  Sat, 11/29/2025

  Scope of Delivery: - 2x REMS pressing jaw pressing tongs standard V 12 ( 570107 ) Product Description: The heavy-duty pressing tongs from REMS are made of forged and specially hardened special steel. The pressing contours of the REMS pressing tongs are system-specific and correspond to the pressing contours of the respective pressfitting systems. This ensures perfect, system-compliant and safe pressing. They have a high-precision machined and precisely rounded pressing contour and therefore significantly lower manufacturing tolerances than cast pressing contours. Technical Data: - Manufacturer: Rems - Manufacturer's description: V 12 - Manufacturer number: 570107 - Compatible: for radial presses ( except Mini-Press ) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 214.37

• 

  Options

  REMS REMS pressing jaw pressing tongs 2x standard M 12 ( 2x 570100 ) for radial presses ( except Mini-Press )

  Scope of Delivery: - 2x REMS pressing jaw pressing tongs standard M 12 ( 570100 ) Product Description: The heavy-duty pressing tongs from REMS are made of forged and specially hardened special steel. The pressing contours of the REMS pressing tongs are system-specific and correspond to the pressing contours of the respective pressfitting systems. This ensures perfect, system-compliant and safe pressing. They have a high-precision machined and precisely rounded pressing contour and therefore significantly lower manufacturing tolerances than cast pressing contours. Technical Data: - Manufacturer: Rems - Manufacturer's designation: M 12 - Manufacturer number: 570100 - Compatible: for radial presses ( except Mini-Press ) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  CHF 222.60

  Options

• 

  Options

  REMS REMS pressing jaw pressing tongs 4x standard M 35 ( 4x 570150 ) for radial presses ( except Mini-Press )

  Scope of Delivery: - 4x REMS pressing jaw pressing tongs standard M 35 ( 570150 ) Product Description: The heavy-duty pressing tongs from REMS are made of forged and specially hardened special steel. The pressing contours of the REMS pressing tongs are system-specific and correspond to the pressing contours of the respective pressfitting systems. This ensures perfect, system-compliant and safe pressing. They have a high-precision machined and precisely rounded pressing contour and therefore significantly lower manufacturing tolerances than cast pressing contours. Technical Data: - Manufacturer: Rems - Manufacturer's description: M 35 - Manufacturer number: 570150 - Compatible: for radial presses ( except Mini-Press ) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  CHF 314.29

  Options

• 

  Options

  REMS REMS pressing jaw pressing tongs 4x standard M 12 ( 4x 570100 ) for radial presses ( except Mini-Press )

  Scope of Delivery: - 4x REMS pressing jaw pressing tongs standard M 12 ( 2570100 ) Product Description: The heavy-duty pressing tongs from REMS are made of forged and specially hardened special steel. The pressing contours of the REMS pressing tongs are system-specific and correspond to the pressing contours of the respective pressfitting systems. This ensures perfect, system-compliant and safe pressing. They have a high-precision machined and precisely rounded pressing contour and therefore significantly lower manufacturing tolerances than cast pressing contours. Technical Data: - Manufacturer: Rems - Manufacturer's designation: M 12 - Manufacturer number: 570100 - Compatible: for radial presses ( except Mini-Press ) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  CHF 438.30

  Options

• 

  Options

  REMS REMS pressing jaw pressing tongs 2x standard M 35 ( 2x 570150 ) for radial presses ( except Mini-Press )

  Scope of Delivery: - 2x REMS pressing jaw pressing tongs standard M 35 ( 570150 ) Product Description: The heavy-duty pressing tongs from REMS are made of forged and specially hardened special steel. The pressing contours of the REMS pressing tongs are system-specific and correspond to the pressing contours of the respective pressfitting systems. This ensures perfect, system-compliant and safe pressing. They have a high-precision machined and precisely rounded pressing contour and therefore significantly lower manufacturing tolerances than cast pressing contours. Technical Data: - Manufacturer: Rems - Manufacturer's description: M 35 - Manufacturer number: 570150 - Compatible: for radial presses ( except Mini-Press ) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  CHF 158.00

  Options

• 

  Options

  REMS REMS pressing jaw pressing tongs standard M 35 ( 570150 ) for radial presses ( except Mini-Press )

  Scope of Delivery: - 1x REMS pressing jaw pressing tongs standard M 35 ( 570150 ) Product Description: The heavy-duty pressing tongs from REMS are made of forged and specially hardened special steel. The pressing contours of the REMS pressing tongs are system-specific and correspond to the pressing contours of the respective pressfitting systems. This ensures perfect, system-compliant and safe pressing. They have a high-precision machined and precisely rounded pressing contour and therefore significantly lower manufacturing tolerances than cast pressing contours. Technical Data: - Manufacturer: Rems - Manufacturer's description: M 35 - Manufacturer number: 570150 - Compatible: for radial presses ( except Mini-Press ) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  CHF 98.13

  Options

• 

  Options

  REMS REMS pressing jaw pressing tongs standard M 12 ( 570100 ) for radial presses ( except Mini-Press )

  Scope of Delivery: - 1x REMS pressing jaw pressing tongs standard M 12 ( 570100 ) Product Description: The heavy-duty pressing tongs from REMS are made of forged and specially hardened special steel. The pressing contours of the REMS pressing tongs are system-specific and correspond to the pressing contours of the respective pressfitting systems. This ensures perfect, system-compliant and safe pressing. They have a high-precision machined and precisely rounded pressing contour and therefore significantly lower manufacturing tolerances than cast pressing contours. Technical Data: - Manufacturer: Rems - Manufacturer's designation: M 12 - Manufacturer number: 570100 - Compatible: for radial presses ( except Mini-Press ) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  CHF 102.40

  Options

• 

  REMS REMS pressing jaw pressing tongs standard V 12 ( 570107 ) for radial presses ( except Mini-Press )

  Sat, 11/29/2025

  Scope of Delivery: - 1x REMS pressing jaw pressing tongs standard V 12 ( 570107 ) Product Description: The heavy-duty pressing tongs from REMS are made of forged and specially hardened special steel. The pressing contours of the REMS pressing tongs are system-specific and correspond to the pressing contours of the respective pressfitting systems. This ensures perfect, system-compliant and safe pressing. They have a high-precision machined and precisely rounded pressing contour and therefore significantly lower manufacturing tolerances than cast pressing contours. Technical Data: - Manufacturer: Rems - Manufacturer's description: V 12 - Manufacturer number: 570107 - Compatible: for radial presses ( except Mini-Press ) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 110.93

• 

  Options

  Rothenberger Rothenberger ROMAX 4000 CAS cordless crimping machine 18 V 34 kN + 2x battery pack 5,5 Ah + charger + case

  Scope of Delivery: - 1x Rothenberger ROMAX 4000 18 V Li-Ion battery pressing machine electro-hydraulic ( 1000002683 ) - 2x Metabo LiHD battery pack 18V 5.5 Ah ( 625368000 ) - 1x Metabo ASC 145 charger ( 627378000 ) - 1x transport case - 1x suitable insert Product Description: The ROMAX® 4000 is an electro-hydraulic cordless crimping machine for system-dependent crimping of fittings up to Ø 110 mm with 32 - 34 kN. The use of more powerful battery technology enables more crimps per charging process. A low weight of 3.6 kg and balanced weight distribution reduce fatigue and enable ergonomic and energy-saving work, even over longer periods of time. The CFT® technology used guarantees the required pressing force during pressing. The improved service interval of 40,000 pressing cycles / 2 years ensures high productivity. Thanks to the new LiHD technology, Metabo is the only manufacturer in the world to cover the entire power range from 400 to 3200 watts. Applications that were previously reserved for the most powerful mains machines are now possible cordlessly thanks to the 5.5 Ah battery. The combination of innovative high-performance cells and completely newly developed components of the LiHD battery pack ensures ultimate performance and extremely long use with minimal temperature development. The rubberised exterior of the battery pack ensures a secure, non-slip stand and also serves as impact protection. The 100% compatibility with all 18 V machines and chargers from CAS (Cordless Alliance System) partners: Rothenberger, Edding, Fischer, Mafell, Collomix, Eibenstock, Eisenblättert, Haaga, Starmix, Steine, Rokamat, Birchmeier makes the battery pack a battery for everything. Technical Data: - Voltage: 18 V - Device dimensions: 59 x 38.4 x 14.3 cm - Weight incl. case: 6.73 kg - REACH compliant: Yes - RoHS compliant: Yes - Country of origin: Germany - Gross weight: 7.2 kg - Working range diameter up to (MM): 110 mm - Working range diameter from (MM): 12 mm - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  CHF 1,192.68

  Options

• 

  Options

  Rothenberger Rothenberger ROMAX 4000 CAS cordless crimping machine 18 V 34 kN + 1x battery 5.5 Ah + charger + case

  Scope of Delivery: - 1x Rothenberger ROMAX 4000 18 V Li-Ion battery-powered pressing machine electro-hydraulic ( 1000002683 ) - 1x Metabo LiHD battery pack 18V 5.5 Ah ( 625368000 ) - 1x Metabo ASC 145 charger ( 627378000 ) - 1x transport case - 1x suitable insert Product Description: The ROMAX® 4000 is an electro-hydraulic cordless crimping machine for system-dependent crimping of fittings up to Ø 110 mm with 32 - 34 kN. The use of more powerful battery technology enables more crimps per charging process. A low weight of 3.6 kg and balanced weight distribution reduce fatigue and enable ergonomic and energy-saving work, even over longer periods of time. The CFT® technology used guarantees the required pressing force during pressing. The improved service interval of 40,000 pressing cycles / 2 years ensures high productivity. Thanks to the new LiHD technology, Metabo is the only manufacturer in the world to cover the entire power range from 400 to 3200 watts. Applications that were previously reserved for the most powerful mains machines are now possible cordlessly thanks to the 5.5 Ah battery. The combination of innovative high-performance cells and completely newly developed components of the LiHD battery pack ensures ultimate performance and extremely long use with minimal temperature development. The rubberised exterior of the battery pack ensures a secure, non-slip stand and also serves as impact protection. The 100% compatibility with all 18 V machines and chargers from CAS (Cordless Alliance System) partners: Rothenberger, Edding, Fischer, Mafell, Collomix, Eibenstock, Eisenblättert, Haaga, Starmix, Steine, Rokamat, Birchmeier makes the battery pack a battery for everything. Technical Data: - Voltage: 18 V - Device dimensions: 59 x 38.4 x 14.3 cm - Weight incl. case: 6.73 kg - REACH compliant: Yes - RoHS compliant: Yes - Country of origin: Germany - Gross weight: 7.2 kg - Working range diameter up to (MM): 110 mm - Working range diameter from (MM): 12 mm - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  CHF 1,108.45

  Options

• 

  Options

  REMS REMS battery press 22V ACC 32kN + 1x battery 2.5Ah + quick charger in L-Boxx set ( 576011 R220 )

  Scope of Delivery: - 1x REMS Akku-Press 22V ACC drive unit ( 576000 R22 ) - 1x REMS 2,5Ah battery ( 571571 R22 ) - 1x REMS quick charger ( 571575 R220 ) - 1x L-Boxx system case with insert ( 571283 R ) Product Description: The Power-Press is designed for producing press connections for all common press-fitting systems on steel pipes, stainless steel, copper, plastic and composite pipes. The press tongs/press rings are made of forged and tough, specially hardened special steel and are highly resilient. This enables a thrust and pressing force of several tonnes for flawless pressing in seconds. The automatic locking of the pressing tongs and the automatic return after completion of the pressing process (forced run-off) provide the user with additional safety. The radial press impresses with its powerful electro-hydraulic drive with high-torque 21.6V battery motor, 380W output, robust planetary gearbox, eccentric piston pump and compact high-performance hydraulic system. The REMS Li-Ion 22V Technology sets standards in terms of economy and user-friendliness. It allows the user super-fast pressing in 4.5s and 50% more energy than 14.4V batteries. The anti-vibration system enables low-vibration, fatigue-free pressing. Thanks to its compact and handy design, the Power-Press can be used anywhere, freehand, overhead, even in particularly tight spaces. According to the manufacturer, the 2.5 Ah battery included in the scope of delivery is sufficient for approx. 200 Viega Profipress DN 15 pressings per battery charge. The matching quick charger ensures short charging times for the 10.8-21.6 V devices. Technical Data: - Press connections: Ø 10-108 (110) mm, Ø ⅜ -4" - Thrust force: 32 kilonewtons - Dimensions (LxWxH): 285x290x81 mm - Weight (incl. battery): 3.2 kg - Sound pressure level: 74 dB(A) - Sound power level: 85 dB(A) - Uncertainty (K): 3 dB(A) - Vibration emission: For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  CHF 1,444.05

  Options

• 

  Options

  Rothenberger Rothenberger Press Jaw Standard M 15-18-22-28 Set ( 015062X ) + Carry Case Rocase 4212

  Package contents: - 1x Carry Case Rocase Rothenberger 4212 ( 1000001808 ) + Insert - 1x Press Jaw Rothenberger Standard M15 for pressing machine ROMAX ( 015102X ) - 1x Press Jaw Rothenberger Standard M18 for pressing machine ROMAX ( 015103X ) - 1x Press Jaw Rothenberger Standard M22 for pressing machine ROMAX ( 015104X ) - 1x Press Jaw Rothenberger Standard M28 for pressing machine ROMAX 4000 ( 015105X ) Product description: These press jaws from Rothenberger, whose high quality materials and workmanship have proven their worth, are suitable for pressing metal or plastic fitting systems. The use of a special hardening process, DURA LAZR TEC technology, and a partial laser hardening process allow precise and safe crimping with increased durability. This minimizes wear and tear and increases the number of pressure cycles by 100% compared to the previous model. Moreover, long-term corrosion protection increases the service life of the press jaws. Thanks to the use of high-strength special steel, these press jaws are suitable for all pressing machines with an axial thrust of 32 to 34 kN. DURA LAZR TEC process - Partial laser hardening ensures maximum hardening in highly loaded areas. This reduces wear and tear and ensures high contour accuracy. When combined with forged, high-strength and flexible special steel, this new generation of press jaws guarantees a 100% longer service life than the previous generation. Its 3-bolt synchronization mechanism allows the pressing machine to be opened with just one finger. The precisely manufactured contour ensures optimal and secure crimping. With the carry case ROCASE from Rothenberger, the installer will save time because several cases can be transported simultaneously by simply clipping them together. Moreover, this ROCASE made of ABS plastic perfectly protects the tools stored in it. Besides, they are perfectly packed and ready for transport. This case is equipped with a foldable handle, a holder for a shoulder strap (not included) and a locking eyelet. The set also includes an insert for various Rothenberger press jaws. Technical specifications: Case dimensions (length x width x height): 390 x 125 x 190 mm Press jaws Standard M

  Read more less

  Pre-order

  CHF 360.33

  Options

Show more products