Products
-
HELLER Heller hammer drill Trijet ( 8000656708 ) Ø 16 mm working length 550 mm length 600 mm
Scope of Delivery: - 1x HELLER hammer drill Ø 16 mm working length 550 mm length 600 mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, including the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140° - Ø: 16 mm - Working length: 550 mm - Total length: 600 mm - Number of cutting edges: 3 - Holder: SDS-plus - Brand: HELLERPlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!
-
HELLER Heller hammer drill Trijet ( 8000656775 ) Ø 6.5 mm working length 230 mm length 290 mm
Thu, 09/11/2025
Scope of Delivery: - 1x HELLER hammer drill Ø 6.5 mm working length 230 mm length 290 mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, including the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 14mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140° - Ø: 6.5 mm - Working length: 230 mm - Total length: 290 mm - Number of cutting edges: 3 - Holder: SDS-plus - Brand: HELLERPlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!
CHF 21.78
-
HELLER Heller hammer drill Trijet ( 8000869713 ) Ø 18 mm working length 200 mm length 250 mm
Scope of Delivery: - 1x HELLER hammer drill Ø 18 mm working length 200 mm length 250 mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, including the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Shank shape: cylindrical - Cutting direction: right - Cutting material: carbide - Angle of the tip: 140° - Ø: 18 mm - Working length: 200 mm - Total length: 250 mm - Number of cutting edges: 3 - Holder: SDS-plus - Brand: HELLERFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
-
HELLER Heller hammer drill Trijet Ultimate ( 4000864943 ) Ø 12 mm working l.200 mm l.340 mm
Scope of Delivery: - 1x HELLER hammer drill Ø 12 mm working length 200 mm length 340 mm Product Description: guarantees maximum effectiveness, robustness and speed in concrete and reinforcement - double centring tip for simple, precise drilling and at the same time ensures powerful drilling progress thanks to its solid, embedded carbide head - improved drill dust transport thanks to new helix design and optimised drill dust grooves in the head - vibration-optimised helix - no snagging on reinforcement thanks to backward-curved cutting edges - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 18mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140° - Ø: 12 mm - Working length: 200 mm - Total length: 340 mm - Type: Trijet Ultimate - Number of cutting edges: 3 - Holder: SDS-max - Brand: HELLERPlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!
-
HELLER Heller hammer drill Trijet Ultimate ( 4000864948 ) Ø 14 mm working l.200 mm l.340 mm
Scope of Delivery: - 1x HELLER hammer drill Ø 14 mm working length 200 mm length 340 mm Product Description: guarantees maximum effectiveness, robustness and speed in concrete and reinforcement - double centring tip for simple, precise drilling and at the same time ensures powerful drilling progress thanks to its solid, embedded carbide head - improved drill dust transport thanks to new helix design and optimised drill dust grooves in the head - vibration-optimised helix - no snagging on reinforcement thanks to backward-curved cutting edges - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 18mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140° - Ø: 14 mm - Working length: 200 mm - Total length: 340 mm - Type: Trijet Ultimate - Number of cutting edges: 3 - Holder: SDS-max - Brand: HELLERPlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!
-
HELLER HELLER hammer drill Trijet Ultimate D.10,0mm Working-L.100mm L.160mm ( 4300000174 )
Thu, 09/11/2025
Scope of Delivery: - Hammer drill Trijet Ultimate D.10,0mm Working-L.100mm L.160mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!
CHF 15.93
-
HELLER HELLER hammer drill Trijet Ultimate D.10,0mm Working-L.150mm L.210mm ( 4300000178 )
Scope of Delivery: - Hammer drill Trijet Ultimate D.10,0mm Working-L.150mm L.210mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!
-
HELLER HELLER hammer drill Trijet Ultimate D.12,0mm Working-L.100mm L.160mm ( 4300000175 )
Thu, 09/11/2025
Scope of Delivery: - 1x HELLER hammer drill Trijet Ultimate D.12,0mm Working-L.100mm L.160mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!
CHF 17.19
-
HELLER HELLER hammer drill Trijet Ultimate D.12,0mm Working-L.150mm L.210mm ( 4300000179 )
Thu, 09/11/2025
Scope of Delivery: - 1x HELLER hammer drill Trijet Ultimate D.12,0mm Working-L.150mm L.210mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!
CHF 21.03
-
HELLER HELLER hammer drill Trijet Ultimate D.12,0mm Working-L.250mm L.310mm ( 4300000184 )
Thu, 09/11/2025
Scope of Delivery: - Hammer drill Trijet Ultimate D.12,0mm Working-L.250mm L.310mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!
CHF 29.37
-
HELLER HELLER hammer drill Trijet Ultimate D.14,0mm Working-L.150mm L.200mm ( 4300000180 )
Thu, 09/11/2025
Scope of Delivery: - Hammer drill Trijet Ultimate D.14,0mm Working-L.150mm L.200mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!
CHF 26.15
-
HELLER HELLER hammer drill Trijet Ultimate D.14,0mm Working-L.250mm L.300mm ( 4300000185 )
Thu, 09/11/2025
Scope of Delivery: - Hammer drill Trijet Ultimate D.14,0mm Working-L.250mm L.300mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!
CHF 32.57
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"