Products
-
HELLER HELLER hammer drill ENDURO D.20,0mm Working-L.200mm L.320mm ( 4000864892 )
Thu, 09/11/2025
Scope of Delivery: - 1x HELLER hammer drill ENDURO D.20,0mm Working-L.200mm L.320mm Product Description: guarantees maximum effectiveness, robustness and speed in concrete and reinforcement - double centring tip for simple, precise drilling and at the same time ensures powerful drilling progress thanks to its solid, embedded carbide head - improved drill dust transport thanks to new helix design and optimised drill dust grooves in the head - vibration-optimised helix - no snagging on reinforcement thanks to backward-curved cutting edges - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) - areas of application: Concrete, reinforced concrete, stone, sand-lime brick, masonry, marble and clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 18mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 160° - Areas of application: Concrete, reinforced concrete, stone, sand-lime brick, masonry, marble and clinkerFor commercial use, please observe the building regulations!
CHF 62.77
-
HELLER HELLER hammer drill ENDURO Trijet D.14,0mm Working-L.400mm L.540mm ( 4000864949 )
Scope of Delivery: - 1x HELLER hammer drill ENDURO Trijet D.14,0mm Working-L.400mm L.540mm Product Description: guarantees maximum effectiveness, robustness and speed in concrete and reinforcement - double centring tip for simple, precise drilling and at the same time ensures powerful drilling progress thanks to its solid, embedded carbide head - improved drill dust transport thanks to new helix design and optimised drill dust grooves in the head - vibration-optimised helix - no snagging on reinforcement thanks to backward-curved cutting edges - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) - areas of application: Concrete, reinforced concrete, stone, sand-lime brick, masonry, marble and clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 18mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140° - Areas of application: Concrete, reinforced concrete, stone, sand-lime brick, masonry, marble and clinkerFor commercial use, please observe the building regulations!
-
HELLER HELLER hammer drill ENDURO Trijet D.16,0mm Working-L.200mm L.340mm ( 4000864953 )
Thu, 09/11/2025
Scope of Delivery: - Hammer drill ENDURO Trijet D.16,0mm Working-L.200mm L.340mm Product Description: The Enduro Trijet SDS-max hammer drill bit (available up to 16 mm in diameter) combines speed and robustness to perfection - even in reinforced concrete. The embedded carbide head makes this drill bit extremely resistant. The user also benefits from very low vibration and particularly easy drilling. - Areas of application: Concrete, reinforced concrete, stone, sand-lime brick, masonry, marble and clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 18mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!
CHF 61.35
-
HELLER HELLER hammer drill ENDURO Trijet D.16,0mm Working-L.400mm L.540mm ( 4000864954 )
Scope of Delivery: - Hammer drill ENDURO Trijet D.16,0mm Working-L.400mm L.540mm Product Description: The Enduro Trijet SDS-max hammer drill bit (available up to 16 mm in diameter) combines speed and robustness to perfection - even in reinforced concrete. The embedded carbide head makes this drill bit extremely resistant. The user also benefits from very low vibration and particularly easy drilling. - Areas of application: Concrete, reinforced concrete, stone, sand-lime brick, masonry, marble and clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 18mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!
-
HELLER Heller hammer drill Trijet ( 4300000182 ) Ø 8 mm working length 250 mm length 310 mm
Thu, 09/11/2025
Scope of Delivery: - 1x HELLER hammer drill Ø 8 mm working length 250 mm length 310 mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, including the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140° - Ø: 8 mm - Working length: 250 mm - Total length: 310 mm - Number of cutting edges: 3 - Holder: SDS-plus - Brand: HELLERPlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!
CHF 23.59
-
HELLER Heller hammer drill Trijet ( 8000656330 ) Ø 22 mm working length 400 mm length 450 mm
Scope of Delivery: - 1x HELLER hammer drill Ø 22 mm working length 400 mm length 450 mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, including the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 160° - Ø: 22 mm - Working length: 400 mm - Total length: 450 mm - Number of cutting edges: 3 - Holder: SDS-plus - Brand: HELLERPlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!
-
HELLER Heller hammer drill Trijet ( 8000656331 ) Ø 24 mm working length 200 mm length 250 mm
Scope of Delivery: - 1x HELLER hammer drill Ø 24 mm working length 200 mm length 250 mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, including the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 160° - Ø: 24 mm - Working length: 200 mm - Total length: 250 mm - Number of cutting edges: 3 - Holder: SDS-plus - Brand: HELLERFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
-
HELLER Heller hammer drill Trijet ( 8000656333 ) Ø 25 mm working length 400 mm length 450 mm
Scope of Delivery: - 1x HELLER hammer drill Ø 25 mm working length 400 mm length 450 mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, including the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 160° - Ø: 25 mm - Working length: 400 mm - Total length: 450 mm - Number of cutting edges: 3 - Holder: SDS-plus - Brand: HELLERPlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!
-
HELLER Heller hammer drill Trijet ( 8000656696 ) Ø 10 mm working l.200 mm l.260 mm
Thu, 09/11/2025
Scope of Delivery: - 1x HELLER hammer drill Ø 10 mm working length 200 mm length 260 mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, including the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140° - Ø: 10 mm - Working length: 200 mm - Total length: 260 mm - Number of cutting edges: 3 - Holder: SDS-plus - Brand: HELLERPlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!
CHF 19.77
-
HELLER Heller hammer drill Trijet ( 8000656697 ) Ø 10 mm working length 400 mm length 460 mm
Thu, 09/11/2025
Scope of Delivery: - 1x HELLER hammer drill Ø 10 mm working length 400 mm length 460 mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, including the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140° - Ø: 10 mm - Working length: 400 mm - Total length: 460 mm - Number of cutting edges: 3 - Holder: SDS-plus - Brand: HELLERPlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!
CHF 29.37
-
HELLER Heller hammer drill Trijet ( 8000656701 ) Ø 12 mm working length 550 mm length 600 mm
Thu, 09/11/2025
Scope of Delivery: - 1x HELLER hammer drill Ø 12 mm working length 550 mm length 600 mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, including the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140° - Ø: 12 mm - Working length: 550 mm - Total length: 600 mm - Number of cutting edges: 3 - Holder: SDS-plus - Brand: HELLERPlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!
CHF 48.54
-
HELLER Heller hammer drill Trijet ( 8000656703 ) Ø 14 mm working length 200 mm length 250 mm
Scope of Delivery: - 1x HELLER hammer drill Ø 14 mm working length 200 mm length 250 mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, including the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140° - Ø: 14 mm - Working length: 200 mm - Total length: 250 mm - Number of cutting edges: 3 - Holder: SDS-plus - Brand: HELLERFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"