Diagnostic Tools
-
KS Tools KS TOOLS Kompressions-Druckprüfgerät für Dieselmotoren mit Diagrammschreiber, 53-tlg ( 150.1656 )
Produktbeschreibung:Kompressions-Druckprüfgerät für Dieselmotoren mit Diagrammschreiber, 53-tlg · Kompressions-Druckprüfgerät für Dieselmotoren mit DiagrammschreiberMerkmale: Schnellverbindungssystem für Dummy-Injektoren, keine Werkzeug notwendig nur verwendbar mit Glühkerzen- oder Injektoren-Adapter inklusive Aufzeichnungskarte im großem Maßstab ca. 50 mm mit beschichteter Oberfläche 1 Adapter M12x1,5 mm für Original-Einspritzdüsen 1 Adapter M14x1,5 mm für den Einsatz, wenn der Schnellverbinder nicht montiert werden kann sorgt für klare und genaue Druckprüfungsergebnisse jede Diagrammkarte ermöglicht bis zu 8 Prüfungen (+2 optionale) sehr biegsamer Schlauch für schwer zugängliche Stellen inklusive 48 Stück Diagrammkarten in stabilem Kunststoffkoffer Technische Daten: - Anwendungsbereich allgemein: Diesel - Gewicht [g]: 2800 g - Herstellernummer: 150.1656 - Teile im Satz: 53 -tlg. - Verpackung: Kunststoffkoffer, extra robust
-
Wera WERA phase tester 247 150 - 250 V AC ( 4000828812 )
Fri, 09/26/2025
Scope of Delivery: - Phase tester 247 150 - 250 V AC Product Description: single-pole - with transparent Kraftform handle, roll-off protection, insulated blade and metal clip Technical Data: - Blade length: 70mm - Blade thickness: 0.5mm - subject to inspection: yesFor commercial use, please observe the building regulations!
CHF 13.62
-
BENNING Benning multimeter MM 6-2 ( 4000828936 ) 0.000 V -1000 V AC/DC
Scope of Delivery: - 1x BENNING multimeter 0.000 V -1000 V AC/DC - Delivery incl. rubber protection frame with magnetic hanger, bag, battery (9 V block LR 61), test leads Spare battery see art. no. 4000 876 104 Product Description: with illuminated 4-digit LCD display (6000 dots) with bar graph - continuity test via red LED and buzzer - diode test - AutoV function for automatic AC/DC voltage detection - low input impedance LoZ for suppression of capacitive/inductive interspersed voltages - integrated voltage sensor contactlessly signals phase voltages and cable breaks in lines (optical/acoustic) - single-pole phase test - automatic range selection - automatic switch-off - measured value (HOLD), peak value memory (PEAK), relative measurement (REL) - measurement category CAT IV 600 V, CAT III 1000 V Measurement ranges: DC voltage: 100 µV - 1000 V, AC voltage: 100 µV - 1000 V, DC current: 1 mA - 10 A, AC current: 20 mA - 10 A, Resistance: 0.1 Ω - 40 MΩ, Frequency: 0.01 Hz - 100 kHz, Capacitance: 1 nF - 10 mF Technical Data: - Width: 82mm - Length: 163mm - Height: 50mm - Measuring method: TRUE RMS - Brand: BENNING - Nominal voltage range: 0.000 V -1000 V AC/DC - Measuring category: CAT IV 600 VNote on the disposal of batteries and rechargeable batteries As we sell batteries and rechargeable batteries or devices containing batteries and rechargeable batteries, we are obliged under the Battery Act (BattG) to draw your attention to the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
-
BENNING Benning digital multimeter MM 10-1 ( 4000828954 ) 0.1 mV - 1000 V
Fri, 09/26/2025
Scope of Delivery: - 1x BENNING digital multimeter 0.1 mV - 1000 V - Delivery incl. rubber protection frame, batteries (2 x type AA), bag, test leads, wire temperature probe Spare batteries see art. 4000 901 811 Product Description: Digital multimeter for heating, ventilation and air conditioning technology as well as service and industry. Digital display. Analogue bargraph display yes. 4-digit LCD display (6000 dots). Backlighting of the LC display. Continuity test/diode test yes. Continuity test (measuring ranges: DC voltage 0.1 mV - 1000 V, AC voltage 0.1 mV - 1000 V, DC current 0.1 µA - 0.4 A, AC current 0.1 0.4 A, resistance 0.1 Ω - 40 MΩ, capacitance 0.001 µF - 10000 µF, resolution 0.01 Hz - 100 kHz, temperature -40 °C - 400 °C Technical Data: - Measuring method: True RMS - Direct current: 0.1µA - 400 mA - Alternating current: 0.1µA - 400 mA - Direct voltage: 0.1 mV - 1000 V - Nominal voltage range: 0.1 mV - 1000 V - Measurement category: CAT IV 600 V, CAT III 1000 V - AC voltage: 0.1 mV - 1000 V - Display: digital - Brand: BENNINGNote on the disposal of batteries and rechargeable batteries As we sell batteries and rechargeable batteries or devices containing batteries and rechargeable batteries, we are obliged under the German Battery Act (BattG) to draw your attention to the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 262.03
-
TESTBOY Testboy multimeter TB 4000 ( 4000828086 ) 0-600 V AC, 0-600 V DC
Scope of Delivery: - 1x TESTBOY multimeter 0-600 V AC, 0-600 V DC - Delivery incl. test leads, temperature sensor and batteries (2 x 1.5 Volt Mignon) For replacement batteries see art. no. 4000 901 811 Product Description: with LCD display and Bluetooth interface - thanks to the Bluetooth interface and free Testboy app, all measurement data can be transferred to a mobile phone (enables data logging of the measured values as well as graphical and tabular evaluation - export, e.g. in Excel format, enables numerous analysis functions) Technical Data: - DC/AC voltage measurement: 0 - 600 V DC/AC current measurement: 0 - 10 A Resistance measurement: 0 Ω - 60 MΩ Continuity test: 0 Ω - 50 Ω Frequency measurement: 0 Hz - 10 MHz Polarity display: automatic Temperature measurement*: -20 to + 200 ° Overvoltage category: CAT III 600 V * using K-type probe (wire probe)Technical data: - Width: 90mm - Length: 180mm - subject to testing: yes - Height: 40mm - Measuring method: TRUE RMS - Direct current: 10 A - Alternating current: 0 - 10 A - Direct voltage: 600 V - Nominal voltage range: 0-600 V AC, 0-600 V DC - Measurement category: CAT III 600 V - AC voltage: 0 - 600 V AC - Display: digital - Brand: TESTBOYNote on the disposal of batteries and rechargeable batteries As we sell batteries and rechargeable batteries or devices containing batteries and rechargeable batteries, we are obliged under the Battery Act (BattG) to draw your attention to the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
-
BENNING BENNING measuring lead set 044146 2-piece measuring tip Ø 2 mm ( 4000828921 )
Fri, 09/26/2025
Scope of Delivery: - Measuring lead set 044146 2-part measuring tip Ø 2 mm Product Description: for all standard digital multimeters, digital current clamp multimeters and insulation resistance measuring devices with 4 mm socket - CAT IV 600 V/ CAT III 1000 V (with protective caps), CAT II 1000 V (without protective caps) Technical Data: - Length: 1400mmFor commercial use, please observe the building regulations!
CHF 22.28
-
BENNING BENNING measuring lead set 044145 2-piece measuring tip Ø 4 mm ( 4000828920 )
Fri, 09/26/2025
Scope of Delivery: - Measuring lead set 044145 2-part measuring tip Ø 4 mm Product Description: for all standard digital multimeters, digital current clamp multimeters and insulation resistance measuring devices with 4 mm socket - CAT IV 600 V/ CAT III 1000 V (with protective caps), CAT II 1000 V (without protective caps) Technical Data: - Length: 1400mmFor commercial use, please observe the building regulations!
CHF 26.97
-
BENNING BENNING standby bag DUSPOL L330xH60xW100mm ( 4000828854 )
Fri, 09/26/2025
Scope of Delivery: - Standby bag DUSPOL L330xH60xW100mm - Supplied without contents (tester) Product Description: with Velcro fastener and belt pouch made of hard-wearing nylon fabric suitable for: DUSPOL® analogue, DUSPOL® expert, DUSPOL® digital, PROFIPOL®+ Technical Data: - Width: 100mm - Length: 330mm - Design: with Velcro fastener and belt loop - height: 60mm - Suitable for: DUSPOL® analogue, DUSPOL® expert, DUSPOL® digital, PROFIPOL®+For commercial use, please observe the building regulations!
CHF 28.49
-
BENNING BENNING continuity/line tester DUTEST(R) pro 6-400 V AC/DC ( 4000828842 )
Fri, 09/26/2025
Scope of Delivery: - Continuity/line tester DUTEST® pro 6-400 V AC/DC - Continuity and lead tester, integrated magnetic holder and belt clip Supplied without batteries (3 AA batteries required) For batteries, see item no. 4000 901 811 Product Description: with work light - for testing high and low resistance resistors - continuity and diode testing via LEDs and test buzzer - buzzer volume and brightness of the pinpoint high-power LED torch individually adjustable in 4 stages Measuring ranges: - Display via 3 LEDs: 0 - 100 Ω/ 1 kΩ/ 10 kΩ - Acoustic display via test buzzer up to approx. 100 Ω - External voltage display: 6 - 400 V (LEDs/ test buzzer) - Polarity test - Single-pole phase conductor test (phase) - Non-contact cable break detector - Measurement category: CAT lll 300 V Technical Data: - Mode of operation: two-pole - Continuity test: LED/buzzerFor commercial use, please observe the building regulations!
CHF 42.20
-
BENNING BENNING SDT 1 socket outlet tester for testing socket outlets with earthing contact ( 4000828811 )
Fri, 09/26/2025
Scope of Delivery: - SDT 1 socket outlet tester for testing earthed socket outlets Product Description: Quick and easy testing of earthed sockets for correct connection - Wiring faults, such as missing PE, N and L conductors and reversed L and PE conductors are clearly indicated via 3 LEDs - Active PE test with touch electrode and LC display warns of the presence of a dangerous touch voltage (> 50 V) at the protective conductor connection (PE) - Test button for tripping 30 mA RCD circuit breaker - Clear indication via LEDs and LC display - Easy-to-understand status table provides information on the correct connection (OK, green) and the type of fault present (red) of the socket outlet with earthing contact - Measuring category CAT III 300 V Technical Data: - Display: LCD/LEDsFor commercial use, please observe the building regulations!
CHF 56.66
-
BENNING BENNING phase/magnetic field tester VT 2 1-pole ( 4000828953 )
Fri, 09/26/2025
Scope of Delivery: - Phase/magnetic field tester VT 2 1-pole - Delivery incl. batteries (2 x type AAA), pin clip, spare battery see art. 4000 901 810 Product Description: non-contact operation - 1-pole phase tester with red LED test probe and increasing buzzer frequency - phase testing on sockets, junction boxes, switches, cables and lamps, etc. - testing of insulated cables, such as cable reels, fairy lights, for cable breakage - voltage 12 - 1000 V AC - 12 V voltage range can be switched on via push-button - capacitive measuring method - testing of magnetic fields (permanent, (permanent, AC and DC induced), solenoid valves in pneumatic and hydraulic systems, heating systems and pumps, relays/contactors in vehicles, machines, devices and control systems - Magnetic field display via green LED test probe - Integrated test magnet for functional testing - Cable break detector - Cat IV 600 V, Cat III 1000 V - IP53 - Length 153 mm - Tip length 12 mm - Blade width 3 mm Technical Data: - Batteries: 2 x AAA - Protection class: IP53Note on the disposal of batteries and rechargeable batteries - As we sell batteries and rechargeable batteries or devices containing batteries and rechargeable batteries, we are obliged under the German Battery Act (BattG) to inform you of the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!
CHF 60.78
-
BENNING BENNING leakage current clamp CM 9-1 Measuring range 0.010 mA - 60 A AC ( 4000828949 )
Fri, 09/26/2025
Scope of Delivery: - Leakage current clamp CM 9-1 Measuring range 0.010 mA - 60 A AC - Delivery incl. bag, test leads, batteries (2 x type AAA), spare batteries see art. no. 4000 901 810 Product Description: 4-digit illuminated LCD display (6,000 dots) - Measurement of leakage, residual. protective conductor and load currents in electrical systems, devices and machines - measurement without disconnection under normal operating conditions - ideal for preventive maintenance and troubleshooting (protection against property damage and personal injury, power failures, etc.) - reliable and simple detection of insulation faults (e.g. defective cables, loose terminals, dirt, moisture, etc.) frequency characteristics in accordance with EN 61557-16 for testing electrical devices in accordance with VDE 0701-0702 - LPF low-pass filter (40 - 70 Hz) for suppressing high-frequency interference signals - frequency range for railway and industrial applications: 15 Hz - 1 kHz (fg) - Defined protection against external magnetic fields in accordance with EN 61557-13, class 2 ≤ 30 A/m - Automatic range selection - Peak value (PEAK), measured value memory (HOLD) - Zero adjustment (ZERO) - Clamp opening max. 23 mm - Measuring category CAT IV 300 V, CAT III 600 V - Measuring ranges: Alternating current (0.010 mA - 60 A), highest resolution of 1 µA in the 6 mA measuring range, voltage (0.01 V - 600 V AC/DC), resistance (0.1 Ω - 600 kΩ), continuity test Technical Data: - Width: 76mm - Length: 210mm - Height: 34mm - Display: LCDNote on the disposal of batteries and rechargeable batteries - As we sell batteries and rechargeable batteries or devices containing batteries and rechargeable batteries, we are obliged under the Battery Act (BattG) to inform you of the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!
CHF 480.30
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"