Show previous products

• 

  GANTER GANTER plastic articulated foot GN 344 d1 60 mm, d2 M 10 mm l1 98 mm ( 4601002585 )

  Wed, 12/10/2025

  Scope of Delivery: - Plastic articulated foot GN 344 d1 60 mm, d2 M 10 mm l1 98 mm Product Description: with nut, with rubber pad - The static load capacity values given in the table are guide values; if these are exceeded, permanent deformation or breakage of the plastic disc may occur The values given in the table for static load-bearing capacity are guide values which, if exceeded, can lead to permanent deformation or breakage of the plastic plate - Design: Plastic base Thermoplastic (polyamide PA), glass fibre reinforced, black, matt, temperature-resistant up to 100 °C - Adjusting spindle Galvanised steel, blue passivated - Strength class 5.8 - Hexagon nut ISO 4032: Galvanised steel, blue passivated - Rubber pad (NBR): 70 Shore A, black Other designs on request Technical Data: - l3: 24mm - l2: 33mm - l1: 98mm - d1: 60mm - d2: M 10mmFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 15.68

• 

  GANTER GANTER plastic articulated foot GN 344 d1 100 mm, d2 M 16 mm l1 138 mm ( 4601002554 )

  Wed, 12/10/2025

  Scope of Delivery: - Plastic articulated foot GN 344 d1 100 mm, d2 M 16 mm l1 138 mm Product Description: with nut, with rubber pad - The static load capacity values given in the table are guide values; if these are exceeded, permanent deformation or breakage of the plastic disc may occur The values given in the table for static load-bearing capacity are guide values which, if exceeded, can lead to permanent deformation or breakage of the plastic plate - Design: Plastic base Thermoplastic (polyamide PA), glass fibre reinforced, black, matt, temperature-resistant up to 100 °C - Adjusting spindle Galvanised steel, blue passivated - Strength class 5.8 - Hexagon nut ISO 4032: Galvanised steel, blue passivated - Rubber pad (NBR): 70 Shore A, black Other designs on request Technical Data: - l3: 24mm - l2: 43mm - l1: 138mm - d1: 100mm - d2: M 16mmFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 22.65

• 

  Options

  GANTER GANTER Adjustable clamping lever GN 300.1 d1 M 12 mm ( 4601000482 )

  Scope of Delivery: - Adjustable clamping lever GN 300.1 d1 M 12 mm Product Description: adjustable clamping levers GN 300.1 are preferably used when the clamping range is limited or a specific clamping position is required - the threaded insert is detachably connected to the handle by a serration - by lifting (pulling) the handle, the serration is released and the clamping lever can be swivelled into the most favourable clamping position - when released, the handle engages again automatically - handle body - die-cast zinc - threaded bush and retaining screw : stainless steel, 1.4305 other dimensions and colours available on request Technical Data: - d4: 24mm - h2: 11mm - h4: 4mm - l2: -mm - l1: 92mm - h1: 43mm - d1: M 12mm - d3: 19mm - h3: 64mmFor commercial use, please observe the building regulations!

  Read more less

  Pre-order

  CHF 19.46

  Options

• 

  WILKE WILKE rotating ring DIN 4964 shape D rectangular width 16 mm x height 4 mm ( 4118420102 )

  Wed, 12/10/2025

  Scope of Delivery: - Turning ring DIN 4964 shape D rectangular width 16 mm x height 4 mm Product Description: HSS-EW9Co10 - DIN 4964 - shape D: rectangular - hardened, tempered and finish ground - ends straight and unsharpened - hardness 65-69 HRC - cross-section tolerance: h13 length tolerance: +/- 2 mm Technical Data: - Length L: 160mm - W: 16mm - H: 4mmFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 29.65

• 

  Options

  WILKE WILKE Drehling DIN 4964 Form D rechteckig Breite 12 mm x Höhe 6 mm ( 4118420080 )

  Lieferumfang:Drehling DIN 4964 Form D rechteckig Breite 12 mm x Höhe 6 mmProduktbeschreibung:HSS-EW9Co10 · DIN 4964 · Form D: rechteckig · gehärtet, angelassen und fertig geschliffen · Enden gerade und ungeschliffen · Härte 65-69 HRC · Querschnitts-Toleranz: h13 Längentoleranz: +/- 2 mm Technische Daten: Länge L: 200mm B: 12mm H: 6mm

  Read more less

  Pre-order

  CHF 35.30

  Options

• 

  Options

  WILKE WILKE rotating ring DIN 4964 shape D rectangular width 10 mm x height 6 mm ( 4118420070 )

  Scope of Delivery: - Turning ring DIN 4964 shape D rectangular width 10 mm x height 6 mm Product Description: HSS-EW9Co10 - DIN 4964 - shape D: rectangular - hardened, tempered and finish ground - ends straight and unsharpened - hardness 65-69 HRC - cross-section tolerance: h13 length tolerance: +/- 2 mm Technical Data: - L: 200mm - W: 10mm - H: 6mmFor commercial use, please observe the building regulations!

  Read more less

  Pre-order

  CHF 31.55

  Options

• 

  Options

  WILKE WILKE Drehling DIN 4964 Form B quadratisch Breite 5 x 5 mm ( 4118415040 )

  Lieferumfang:Drehling DIN 4964 Form B quadratisch Breite 5 x 5 mmProduktbeschreibung:HSS-EW9Co10 Werkstoff 1.3207 · DIN 4964 · Form B: quadratisch · gehärtet, angelassen und fertig geschliffen · Enden gerade und ungeschliffen · Härte 65-69 HRC · Querschnitts-Toleranz: h13 Längentoleranz: +/- 2 mm Technische Daten: Länge L: 80mm B: 5 x 5mm

  Read more less

  Pre-order

  CHF 15.07

  Options

• 

  Wera WERA replacement felt rings set of 5 ( 4000829878 )

  Wed, 12/10/2025

  Scope of Delivery: - Replacement felt rings set of 5 pieces Product Description: Prevents sanding marks on decking board surfaces - suitable for bit holder item no. 4000 829 877 Technical Data: - Weight: 2gFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 11.44

• 

  Options

  Festool Festool EW-TP 220 Ersatzwalzen ( 496111 ) für TP 220

  Die Ersatzwalzen. Tapetenperforierer. Aggressiv zur Tapete. Sanft zur Wand. Denn, da nicht jede Tapete gleich ist, kann die Eindringtiefe der Walzen individuell eingestellt werden. Das schützt den Untergrund vor Beschädigung. Das Wirkprinzip reduziert dabei den benötigten Kraftaufwand und der verstellbare Teleskoparm macht den Tapetenperforierer TP 220 zum perfekten Werkzeug für hohe Räume.Aggressiv zur Tapete. Sanft zur Wand.Stärken und Nutzen- Leichtes Anbringen mit wenigen Handgriffen- Geringer Kraftaufwand durch ein starkes Wirkprinzip- Die einstellbare Eindringtiefe der Walzen schützt den Untergrund vor Beschädigung- Der verstellbare Teleskopstab ist perfekt für die Arbeit in hohen Räumen und an Decken- Schutzhaube für sicheren und sauberen Transport- Geringes Gewicht für ermüdungsarmes ArbeitenAnwendungsschwerpunkte- Tapeten mühelos entfernenPassend für- für TP 220Lieferumfang2 x Walzen, SB-verpacktBei gewerblicher Nutzung beachten Sie bitte die Bauvorschriften!

  Read more less

  Pre-order

  CHF 48.98

  Options

• 

  Options

  Makita Makita Absaug Set für Akku Laubbläser DUB 363 ( 191E19-1 )

  Lieferumfang:- 2x Saugrohr- 1x U-Rohr- 1x Laubsack- 1x GurtProduktbeschreibung: Das 191E19-1 Laubsaug-Set wurde speziell für anspruchsvolle Aufgaben entwickelt. Mit diesem Set können Sie das kabellose Makita DUB363Z Gebläse in einen leistungsstarken Staubsauger umwandeln. Das Set beinhaltet eine Vakuumdüse, die speziell für die Verwendung mit dem Gebläse konzipiert ist. Damit können Sie mühelos Blätter und anderen Schmutz aufsaugen. Der Schultergurt ermöglicht Ihnen eine bequeme Anwendung des Staubsaugers in verschiedenen Situationen. Mit einem Fassungsvermögen von 50 Litern bietet der beiliegende Staubbeutel ausreichend Platz für den aufgesaugten Schmutz.Technische Daten:Hersteller: MakitaHerstellernummer: 191E19-1Geeignet für: DUB 363Menge: 1Bei gewerblicher Nutzung beachten Sie bitte die Bauvorschriften!

  Read more less

  Pre-order

  CHF 48.37

  Options

• 

  Options

  Makita Makita Vacuum set for DHR 400 / HR 4013 Hammer Drill (196536-6)

  Package contents: -1x Makita Vacuum set for DHR 400 / HR 4013 Hammer Drill (196536-6)  Product description: Makita's drilling and chiselling vacuum set is the perfect accessory for its DHR 400 and HR 4013 drilling and chiselling machines. It features an adapter on the front of the drill chuck and a hoover that can be connected to the side nozzle to prevent dust from being blown around. Makita is a manufacturer of high quality power tools and is renowned for the excellent quality of its tools. Technical specifications: Manufacturer: Makita Makita Manufacturer number: 196536-6 Compatible with : DHR 400 / HR 4013

  Read more less

  Pre-order

  CHF 59.96

  Options

• 

  Options

  Festool Festool Accessories Set for AGC 18-125 Angle Grinder

  Package contents: - 1x Festool TSH-AGC 18-125 Separating Protective Cover for AGC 18-125 Angle Grinder - 1x Protective Cover Festool SH-AGC 18-125 for grinding work - 1x Quick clamping nut Festool QRN-AGC 18 M14 for AGC 18 angle grinder - 1x Clamping nut Festool UF-AG M14 - 1x Additional handle Festool Product description: The TSH-AGC 18-125 Separating Protective Cover from Festool ensures safe working with cut-off discs made of bonded abrasives. The snap-in points allow easy adjustment to any working situation. This cover is compatible with the AGC 18-125 angle grinder. Its excellent quality is guaranteed by the Festool quality standard. Technical specifications: Festool TSH-AGC 18-125 Separating Protective Cover for AGC 18-125 Angle Grinder Manufacturer number: 203378 Compatible with AGC 18-125 Festool SH-AGC 18-125 Protective cover for grinding work Manufacturer number: 203384 Festool QRN-AGC 18 M14 Quick clamping nut for AGC 18 angle grinder Manufacturer number: 204927 Compatible with AGC 18 for pulley Ø 115-125 mm Festool UF-AG M14 clamping nut Manufacturer number: 769018 Disc Ø: 115-230 mm Holder: M14 compatibility: DSC-AG 125/230 and RG 130 until BJ 02/2015 Festool additional handle Material: plastic Vibration damping: VIBRASTOP Holder: M8

  Read more less

  Pre-order

  CHF 88.81

  Options

Show more products