Show previous products

• 

  GANTER GANTER bow handle GN 528 l1 179 ±1 mm d1 8.5 mm ( 4601000175 )

  Wed, 12/10/2025

  Scope of Delivery: - Bow handle GN 528 l1 179 ±1 mm d1 8.5 mm Product Description: PlasticPA thermoplastic (polyamide) - glass fibre reinforced - temperature-resistant up to 150 °C - black, RAL 9005SW other versions on request Technical Data: - h2: 8.5mm - l3: 151mm - b: 28mm - l2: 196mm - l1: 179 ±1mm - h1: 50mm - d1: 8,5mm - s: 7.5mm - d2: 13.5mm - t: 8.5mmFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 55.96

• 

  Options

  KUKKO KUKKO marking template set 327 letters A - Z (4000871886)

  Scope of Delivery: - 1x KUKKO marking template set 327 letters A - Z Product Description: Made of special sheet metal · Block letters · Capital letters A - Z Special advantages: Easy linking of several characters thanks to integrated plug-in system · Possible up to a letter height of 100 mm Bent upwards on the lower side for easy removal of the templates without smudging the paint Technical Data: - Model: 327-300-BFor commercial use, please observe the building regulations!

  Read more less

  Pre-order

  CHF 681.42

  Options

• 

  KUKKO KUKKO signing stencil set 327 letters A - Z ( 4000871884 )

  Wed, 12/10/2025

  Scope of Delivery: - 1x KUKKO signing stencil set 327 letters A - Z Product Description: made of special sheet metal - block letters - capital letters A - Z Special advantages: easy linking of several characters thanks to integrated plug-in system - possible up to a font height of 100 mm bent up at the bottom to allow the stencils to be picked up easily and without smudging the colour Technical Data: - Model: 327-200-BFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 292.68

• 

  GANTER GANTER plastic articulated foot GN 344 d1 80 mm, d2 M 16 mm l1 138 mm ( 4601002614 )

  Wed, 12/10/2025

  Scope of Delivery: - Plastic articulated foot GN 344 d1 80 mm, d2 M 16 mm l1 138 mm Product Description: with nut, with rubber pad - The static load capacity values given in the table are guide values; if these are exceeded, permanent deformation or breakage of the plastic disc may occur The values given in the table for static load-bearing capacity are guide values which, if exceeded, can lead to permanent deformation or breakage of the plastic plate - Design: Plastic base Thermoplastic (polyamide PA), glass fibre reinforced, black, matt, temperature-resistant up to 100 °C - Adjusting spindle Galvanised steel, blue passivated - Strength class 5.8 - Hexagon nut ISO 4032: Galvanised steel, blue passivated - Rubber pad (NBR): 70 Shore A, black Other designs on request Technical Data: - l3: 24mm - l2: 43mm - l1: 138mm - d1: 80mm - d2: M 16mmFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 19.48

• 

  Options

  GANTER GANTER Kunststoff-Gelenkfuß GN 344 d1 80 mm, d2 M 10 mm l1 68 mm ( 4601002608 )

  Lieferumfang:Kunststoff-Gelenkfuß GN 344 d1 80 mm, d2 M 10 mm l1 68 mmProduktbeschreibung:mit Mutter, mit Gummiauflage · die in der Tabelle angegebenen Werte der statischen Belastbarkeit sind Richtwerte, bei deren Überschreitung es zur bleibenden Verformung bzw. zum Bruch des Kunststofftellers kommen kann · Ausführung: Fuß Kunststoff Thermoplast (Polyamid PA), glasfaserverstärkt, schwarz, matt, temperaturbeständig bis 100 °C · Verstellspindel Stahl verzinkt, blau passiviert · Festigkeitsklasse 5.8 · Sechskantmutter ISO 4032: Stahl verzinkt, blau passiviert · Gummiauflage (NBR): 70 Shore A, schwarz weitere Ausführungen auf AnfrageTechnische Daten: l3: 24mm l2: 33mm l1: 68mm d1: 80mm d2: M 10mm

  Read more less

  Pre-order

  CHF 18.11

  Options

• 

  GANTER GANTER plastic articulated foot GN 344 d1 60 mm, d2 M 8 mm l1 43 mm ( 4601002605 )

  Wed, 12/10/2025

  Scope of Delivery: - Plastic articulated foot GN 344 d1 60 mm, d2 M 8 mm l1 43 mm Product Description: with nut, with rubber pad - The static load capacity values given in the table are guide values; if these are exceeded, permanent deformation or breakage of the plastic disc may occur The values given in the table for static load-bearing capacity are guide values which, if exceeded, can lead to permanent deformation or breakage of the plastic plate - Design: Plastic base Thermoplastic (polyamide PA), glass fibre reinforced, black, matt, temperature-resistant up to 100 °C - Adjusting spindle Galvanised steel, blue passivated - Strength class 5.8 - Hexagon nut ISO 4032: Galvanised steel, blue passivated - Rubber pad (NBR): 70 Shore A, black Other designs on request Technical Data: - l3: 24mm - l2: 33mm - l1: 43mm - d1: 60mm - d2: M 8mmFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 14.70

• 

  GANTER GANTER plastic articulated foot GN 344 d1 60 mm, d2 M 16 mm l1 148 mm ( 4601002591 )

  Wed, 12/10/2025

  Scope of Delivery: - Plastic articulated foot GN 344 d1 60 mm, d2 M 16 mm l1 148 mm Product Description: with nut, with rubber pad - The static load capacity values given in the table are guide values; if these are exceeded, permanent deformation or breakage of the plastic disc may occur The values given in the table for static load-bearing capacity are guide values which, if exceeded, can lead to permanent deformation or breakage of the plastic plate - Design: Plastic base Thermoplastic (polyamide PA), glass fibre reinforced, black, matt, temperature-resistant up to 100 °C - Adjusting spindle Galvanised steel, blue passivated - Strength class 5.8 - Hexagon nut ISO 4032: Galvanised steel, blue passivated - Rubber pad (NBR): 70 Shore A, black Other designs on request Technical Data: - l3: 24mm - l2: 33mm - l1: 148mm - d1: 60mm - d2: M 16mmFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 18.01

• 

  Options

  GANTER GANTER Kunststoff-Gelenkfuß GN 344 d1 60 mm, d2 M 12 mm l1 68 mm ( 4601002587 )

  Lieferumfang:Kunststoff-Gelenkfuß GN 344 d1 60 mm, d2 M 12 mm l1 68 mmProduktbeschreibung:mit Mutter, mit Gummiauflage · die in der Tabelle angegebenen Werte der statischen Belastbarkeit sind Richtwerte, bei deren Überschreitung es zur bleibenden Verformung bzw. zum Bruch des Kunststofftellers kommen kann · Ausführung: Fuß Kunststoff Thermoplast (Polyamid PA), glasfaserverstärkt, schwarz, matt, temperaturbeständig bis 100 °C · Verstellspindel Stahl verzinkt, blau passiviert · Festigkeitsklasse 5.8 · Sechskantmutter ISO 4032: Stahl verzinkt, blau passiviert · Gummiauflage (NBR): 70 Shore A, schwarz weitere Ausführungen auf AnfrageTechnische Daten: l3: 24mm l2: 33mm l1: 68mm d1: 60mm d2: M 12mm

  Read more less

  Pre-order

  CHF 17.51

  Options

• 

  Options

  GANTER GANTER Kunststoff-Gelenkfuß GN 344 d1 100 mm, d2 M 12 mm l1 43 mm ( 4601002550 )

  Lieferumfang:Kunststoff-Gelenkfuß GN 344 d1 100 mm, d2 M 12 mm l1 43 mmProduktbeschreibung:mit Mutter, mit Gummiauflage · die in der Tabelle angegebenen Werte der statischen Belastbarkeit sind Richtwerte, bei deren Überschreitung es zur bleibenden Verformung bzw. zum Bruch des Kunststofftellers kommen kann · Ausführung: Fuß Kunststoff Thermoplast (Polyamid PA), glasfaserverstärkt, schwarz, matt, temperaturbeständig bis 100 °C · Verstellspindel Stahl verzinkt, blau passiviert · Festigkeitsklasse 5.8 · Sechskantmutter ISO 4032: Stahl verzinkt, blau passiviert · Gummiauflage (NBR): 70 Shore A, schwarz weitere Ausführungen auf AnfrageTechnische Daten: l3: 24mm l2: 33mm l1: 43mm d1: 100mm d2: M 12mm

  Read more less

  Pre-order

  CHF 20.51

  Options

• 

  GANTER GANTER plastic articulated foot GN 344 d1 100 mm, d2 M 10 mm l1 43 mm ( 4601002547 )

  Wed, 12/10/2025

  Scope of Delivery: - Plastic articulated foot GN 344 d1 100 mm, d2 M 10 mm l1 43 mm Product Description: with nut, with rubber pad - The static load capacity values given in the table are guide values; if these are exceeded, permanent deformation or breakage of the plastic disc may occur The values given in the table for static load-bearing capacity are guide values which, if exceeded, can lead to permanent deformation or breakage of the plastic plate - Version: Plastic base Thermoplastic (polyamide PA), glass fibre reinforced, black, matt, temperature-resistant up to 100 °C - Adjusting spindle Galvanised steel, blue passivated - Strength class 5.8 - Hexagon nut ISO 4032: Galvanised steel, blue passivated - Rubber pad (NBR): 70 Shore A, black Other versions on request Technical Data: - l3: 24mm - l2: 33mm - l1: 43mm - d1: 100mm - d2: M 10mmFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 18.24

• 

  GANTER GANTER Adjustable clamping lever GN 300.1 d1 M 12 mm ( 4601000478 )

  Wed, 12/10/2025

  Scope of Delivery: - Adjustable clamping lever GN 300.1 d1 M 12 mm Product Description: adjustable clamping levers GN 300.1 are preferably used when the clamping range is limited or a specific clamping position is required - the threaded insert is detachably connected to the handle by a serration - by lifting (pulling) the handle, the serration is released and the clamping lever can be swivelled into the most favourable clamping position - when released, the handle engages again automatically - handle body - die-cast zinc - threaded bush and retaining screw : stainless steel, 1.4305 other dimensions and colours available on request Technical Data: - d4: 24mm - h2: 11mm - h4: 4mm - l2: 40mm - l1: 92mm - h1: 43mm - d1: M 12mm - d3: 19mm - h3: 64mmFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 22.38

• 

  Options

  GANTER GANTER Adjustable clamping lever GN 300.1 d1 M 10 mm ( 4601000458 )

  Scope of Delivery: - Adjustable clamping lever GN 300.1 d1 M 10 mm Product Description: adjustable clamping levers GN 300.1 are preferably used when the clamping range is limited or a specific clamping position is required - the threaded insert is detachably connected to the handle by a serration - by lifting (pulling) the handle, the serration is released and the clamping lever can be swivelled into the most favourable clamping position - when released, the handle engages again automatically - handle body - die-cast zinc - threaded bush and retaining screw : stainless steel, 1.4305 other dimensions and colours available on request Technical Data: - d4: 21mm - h2: 8mm - h4: 4mm - l2: -mm - l1: 78mm - h1: 36mm - d1: M 10mm - d3: 16mm - h3: 54mmFor commercial use, please observe the building regulations!

  Read more less

  Pre-order

  CHF 16.48

  Options

Show more products