Direkt ist günstiger für Dich!

Wusstest du, dass Preisvergleich-Plattformen und Suchmaschinen bei jedem Kauf fett mitverdienen? Über 20 % vom Preis gehen nur für Werbung drauf – und das zahlen am Ende alle mit. Wir sagen: Nein danke und möchten die Werbekosten lieber als Preisreduktion an Euch weitergeben!

Aus diesem Grund übermitteln wir nicht mehr unseren gesamten Bestand, die Bestpreis-Angebote und Deals an die großen Plattformen und können Dir so - neben den Geschenken, BROpoints und anderen Vorteilen - wesentlich bessere Preise geben, die Du ausschließlich bei uns findest. Deswegen lohnt es sich, ohne Umwege, direkt zu uns zu kommen.

Initiative für bessere Preise und mehr Fairness im Online-Handel.

Finde hier ALLE ANGEBOTE, für die wir derzeit den Online-Bestpreis haben.

Neueste Artikel

Show previous products

PFERD PFERD felt flap disc Ø 125 mm ( 8000430461 )

Mon, 12/08/2025

Scope of Delivery: - Felt flap disc Ø 125 mm Product Description: for pre-polishing and high-gloss polishing on medium to large components - due to their hardness and flexibility, they are used when geometric shapes must be precisely maintained - for use with polishing pastes - bore 22.23 mm Ø Technical Data: - Drive type: Angle grinder, cordless angle grinder - Application recommendation: Use the soft version for sanding and processing workpieces with very high contours. If very fine surfaces are to be achieved, the hard and soft versions can be used one after the other. - Version: W (soft) - Machinable materials: Nickel-based alloys (e.g. Inconell and Hasteloy), copper, aluminium, brass, bronze, hardened, tempered steels over 1,200 N/mm² (54 HRC, steels up to 1,200 N/mm² ( - Machining tasks: Polishing - Width: 22mm - Ø bore: 22.23mm - RPM, opt.: 1500RPM - Advantages: Low thermal load on the workpiece. Can be freely profiled and can therefore also be used for tools with complicated geometries. Optimum contour adaptation due to high flexibility. - RPM, max.: 7650RPMFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 149.42
PFERD PFERD flap disc Ø80xH30mm grit size 80 ( 8000429790 )

Mon, 12/08/2025

Scope of Delivery: - Flap sander Ø80xH30mm grit size 80 Product Description: aluminium oxide A - with flaps made of abrasive on backing - for universal use from coarse to fine sanding - shaft Ø 6 mm - also suitable for processing brass, copper and zinc Technical Data: - Shank Ø: 6mm - Drive type: Flexible shaft drive, straight grinder - Application recommendation: Increasing the cutting speed results in a slightly finer surface. Increasing the contact pressure results in a slightly coarser surface. The softer the material to be processed, the coarser the surface (when using , An increase in the removal rate should be achieved by using a coarser grit size and not by increasing the contact pressure in order to prevent unnecessary tool wear and thermal stress on the workpiece. Reducing the contact pressure and peripheral speed and adding grinding oil reduces tool wear and the temperature load on the workpiece. For best performance, use at a recommended cutting speed of 15-20 m/s. This achieves an ideal compromise between stock removal rate, surface finish, temperature load on the workpiece and tool wear. Use a suitable grinding oil for the material to significantly increase the service life and grinding performance of the tools. - Machinable materials: Steels up to 1,200 N/mm² ( 54 HRC, malleable cast iron - Machining tasks: Surface processing, deburring, fine grinding in stages, structuring (matting, line matting and satin finishing), weld seam processing, levelling - Width: 30mm - Note: PFERDERGONOMICS recommends flap discs in order to sustainably reduce the vibration and noise generated during use and to improve working comfort. - Length, shaft: 40mm - RPM, opt.: 4800RPM - Safety instructions: For safety reasons, the specified maximum permissible speed must never be exceeded. The contact pressure must be significantly reduced if the specified optimum speed is exceeded. Safety is only guaranteed if the clamping length is at least 15 mm and the specified maximum speed is not exceeded with open shank lengths. - Advantages: Optimum contour adaptation due to high flexibility. Consistently high material removal rate over the entire service life, as new, aggressive abrasive is constantly released. Can be used very close to edges and at angles thanks to the flat cast core design.For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 12.98
Options

PFERD PFERD flap disc Ø50xH30mm grit 40 ( 8000429727 )

Scope of Delivery: - Flap sander Ø50xH30mm grit 40 Product Description: aluminium oxide A - with flaps made of abrasive on backing - for universal use from coarse to fine sanding - shaft Ø 6 mm - also suitable for processing brass, copper and zinc Technical Data: - Shank Ø: 6mm - Drive type: Straight grinder, flexible shaft drive - Application recommendation: Reducing the contact pressure and peripheral speed and adding grinding oil reduces tool wear and the temperature load on the workpiece. Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. For best performance, use at a recommended cutting speed of 15-20 m/s. This achieves an ideal compromise between stock removal rate, surface finish, temperature load on the workpiece and tool wear. Increasing the cutting speed results in a slightly finer surface finish. Increasing the contact pressure results in a slightly coarser surface. The softer the material to be machined, the coarser the surface (when using , An increase in the stock removal rate should be achieved by using a coarser grit size and not by increasing the contact pressure in order to prevent unnecessary tool wear and thermal stress on the workpiece. - Machinable materials: Copper, hardened, tempered steels over 1,200 N/mm² ( 54 HRC - Machining tasks: Gradual fine grinding, deburring, levelling, structuring (matting, line matting and satin finishing), surface processing, weld seam processing - Width: 30mm - Note: PFERDERGONOMICS recommends flap discs in order to sustainably reduce the vibration and noise generated during use and to improve working comfort. - Length, shaft: 40mm - RPM, opt.: 7000RPM - Safety instructions: For safety reasons, the specified maximum permissible speed must never be exceeded. The contact pressure must be significantly reduced if the specified optimum speed is exceeded. Safety is only guaranteed if the clamping length is at least 15 mm and the specified maximum speed is not exceeded with open shank lengths. - Advantages: Consistently high material removal over the entire service life, as new, aggressive abrasive is constantly released. Optimum contour adaptation due to high flexibility. Can be used very close to edges and at angles thanks to the flat casting core design.For commercial use, please observe the building regulations!

Read more less

Pre-order
CHF 11.04

Options
Options

PFERD PFERD diamond cutting disc DG PSF Ø 230 mm bore 22.23 mm ( 8000429388 )

Scope of Delivery: - Diamond cutting disc DG PSF Ø 230 mm bore 22.23 mm Product Description: suitable for angle grinders of all power classes - abrasive: diamond D - with closed edge - high cutting quality Technical Data: - nanFor commercial use, please observe the building regulations!

Read more less

Pre-order
CHF 49.83

Options
Options

PFERD PFERD diamond cutting disc DG PSF Ø 125 mm bore 22.23 mm ( 8000429386 )

Scope of Delivery: - Diamond cutting disc DG PSF Ø 125 mm bore 22.23 mm Product Description: suitable for angle grinders of all power classes - abrasive: diamond D - with closed edge - high cutting quality Technical Data: - nanFor commercial use, please observe the building regulations!

Read more less

Pre-order
CHF 23.40

Options
Options

PFERD PFERD diamond cutting disc DG SG Ø 125 mm bore 22.23 mm ( 8000429371 )

Scope of Delivery: - Diamond cutting disc DG SG Ø 125 mm Bore 22.23 mm Product Description: suitable for angle grinders of all power classes - high cutting comfort - abrasive: diamond D - with closed edge for cutting without edge chipping on workpieces with high-quality surfaces Technical Data: - nanFor commercial use, please observe the building regulations!

Read more less

Pre-order
CHF 43.94

Options
BURG-WÄCHTER BURG-WÄCHTER cylinder padlock 116 PC 50 Niro lock body width 51.3 mm ( 8000428882 )

Mon, 12/08/2025

Scope of Delivery: - Cylinder padlock 116 PC 50 Niro Lock body width 51.3 mm Product Description: for interchangeable profile half cylinders - is suitable for almost all DIN-compliant profile half cylinders (length 10/30 mm) - is supplied without cylinder - quick installation, removal and replacement - is already fully prepared for the installation of interchangeable half cylinders - the respective cylinder does not need to be machined for installation - suitable for integration into existing and new locking systems - made of solid brass - equipped with a hardened shackle that is additionally double-locked Technical Data: - Class PadlocksType of lock Cylinder padlocksSeawater-resistant, rustproof YesFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 28.62
BURG-WÄCHTER BURG-WÄCHTER padlock set Quadro 222 40 shackle thickness 6 mm shackle height 22 mm ( 8000428783 )

Mon, 12/08/2025

Scope of Delivery: - Padlock set Quadro 222 40 Shackle thickness 6 mm Shackle height 22 mm Product Description: Lock sets - solid brass body - steel-hardened shackle - double locking from 40 mm - keyed alike only within a set - SB packed Technical Data: - Number of keys: 4For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 42.63
BURG-WÄCHTER BURG-WÄCHTER padlock set Trio 222 40 shackle thickness 6 mm shackle height 22 mm ( 8000428780 )

Mon, 12/08/2025

Scope of Delivery: - Padlock set Trio 222 40 Shackle thickness 6 mm Shackle height 22 mm Product Description: Lock sets - solid brass body - steel-hardened shackle - double locking from 40 mm - keyed alike only within a set - SB packed Technical Data: - Number of keys: 4For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 34.02
BURG-WÄCHTER BURG-WÄCHTER key box CS 15 V-PZ H205xW160xD75 mm ( 8000428607 )

Mon, 12/08/2025

Scope of Delivery: - Key box CS 15 V-PZ H205xW160xD75 mm Product Description: CityLine - solid key box - with brass pin cylinder - consecutively numbered hook strips - hook heads secured with red plastic caps - neutral paper strips on the back for individual labelling - light grey (RAL 7035) - hook spacing: 30 mm - V-PZ version - prepared for profile half cylinders - without cylinder - can be integrated into locking systems - important: the locking lug must be lockable at 90° to the left - hook spacing: 30 mm Technical Data: - Surface: lacquered - Model: CS 15 V-PZFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 63.42
BURG-WÄCHTER BURG-WÄCHTER key box CS 42 V-PZ H310xW235xD75 mm ( 8000428605 )

Mon, 12/08/2025

Scope of Delivery: - Key box CS 42 V-PZ H310xW235xD75 mm Product Description: CityLine - solid key box - with brass pin cylinder - consecutively numbered hook strips - hook heads secured with red plastic caps - neutral paper strips on the back for individual labelling - light grey (RAL 7035) - hook spacing: 30 mm - V-PZ version - prepared for profile half cylinders - without cylinder - can be integrated into locking systems - important: the locking lug must be lockable at 90° to the left - hook spacing: 30 mm Technical Data: - Surface: lacquered - Model: CS 42 V-PZFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 90.63
BURG-WÄCHTER BURG-WÄCHTER key box CS 24 V-PZ H255xW205xD75 mm ( 8000428604 )

Mon, 12/08/2025

Scope of Delivery: - Key box CS 24 V-PZ H255xW205xD75 mm Product Description: CityLine - solid key box - with brass pin cylinder - consecutively numbered hook strips - hook heads secured with red plastic caps - neutral paper strips on the back for individual labelling - light grey (RAL 7035) - hook spacing: 30 mm - V-PZ version - prepared for profile half cylinders - without cylinder - can be integrated into locking systems - important: the locking lug must be lockable at 90° to the left - hook spacing: 30 mm Technical Data: - Surface: lacquered - Model: CS 24 V-PZFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 73.36