Hoses
-
NORRES NORRES suction and blower hose NEO 390 ONE inner Ø 70 mm ( 4501400605 )
Fri, 09/19/2025
Scope of Delivery: - Suction and blower hose NEO 390 ONE inner Ø 70 mm Product Description: Applications: flexible hose for hot and cold gases, granulate dryer/plastic dryer, hot air dryer, film blowing system, cooling air on extrusion tool, cooling air: UV dryer, IR/infrared, dryer, bus, commercial vehicle, caravan, motorhome, boat, ship, yacht: ventilation, heating Properties: thread-reinforced, highly flexible, very good heat resistance, RoHS compliant Construction: 1. spring steel wire, 2. fabric-reinforced tape, wall: Neoprene-coated glass fabric, 3. cord as reinforcement Temperature range: -35 °C to 135 °C, briefly up to 150 °C Delivery variants: other versions, dimensions and lengths available on request Technical Data: - Bending radius: 39.00mm - Physical state: GaseousFor commercial use, please observe the building regulations!
CHF 135.73
-
NORRES NORRES suction and blower hose NEO 390 ONE inner Ø 57 mm ( 4501400603 )
Fri, 09/19/2025
Scope of Delivery: - Suction and blower hose NEO 390 ONE inner Ø 57 mm Product Description: Applications: flexible hose for hot and cold gases, granulate dryer/plastic dryer, hot air dryer, film blowing system, cooling air on extrusion tool, cooling air: UV dryer, IR/infrared, dryer, bus, commercial vehicle, caravan, motorhome, boat, ship, yacht: ventilation, heating Properties: thread-reinforced, highly flexible, very good heat resistance, RoHS compliant Construction: 1. spring steel wire, 2. fabric-reinforced tape, wall: Neoprene-coated glass fabric, 3. cord as reinforcement Temperature range: -35 °C to 135 °C, briefly up to 150 °C Delivery variants: other versions, dimensions and lengths available on request Technical Data: - Bending radius: 33.00mm - Physical state: GaseousFor commercial use, please observe the building regulations!
CHF 117.91
-
NORRES NORRES NEO 390 ONE suction and blower hose inner Ø 50-51 mm ( 4501400602 )
Fri, 09/19/2025
Scope of Delivery: - Suction and blower hose NEO 390 ONE inner Ø 50-51 mm Product Description: Applications: flexible hose for hot and cold gases, granulate dryer/plastic dryer, hot air dryer, film blowing system, cooling air on extrusion tool, cooling air: UV dryer, IR/infrared, dryer, bus, commercial vehicle, caravan, motorhome, boat, ship, yacht: ventilation, heating Properties: thread-reinforced, highly flexible, very good heat resistance, RoHS compliant Construction: 1. spring steel wire, 2. fabric-reinforced tape, wall: Neoprene-coated glass fabric, 3. cord as reinforcement Temperature range: -35 °C to 135 °C, briefly up to 150 °C Delivery variants: other versions, dimensions and lengths available on request Technical Data: - Bending radius: 30.00mm - Physical state: GaseousFor commercial use, please observe the building regulations!
CHF 113.86
-
NORRES NORRES suction hose CP HiTex 481 inner Ø 400 mm ( 4501400491 )
Fri, 09/19/2025
Scope of Delivery: - Suction hose CP HiTex 481 inner Ø 400 mm Product Description: Applications: flexible hose for hot and cold gases, exhaust gas extraction, extraction of engine exhaust gases: Exhaust hose reels, suction slot ducts, above-floor/under-floor extraction systems, engine test benches, exhaust gas measurement, high-temperature extraction: Furnaces, foundries, blast furnaces, smelters, ceramics industry, glass industry, steelworks, aluminium smelters, bellows, expansion joint Properties: very good against flying sparks and welding spatter, abrasion protection due to external clamping profile, tension-resistant clamping of the wall in the clamping profile, very good heat resistance, flame-retardant in accordance with: DIN 4102-B1, RoHS compliant Construction: 1. clamping profile support spiral: completely stainless steel (INOX), 2. double-layer wall, wall: inside and outside reinforced with stainless steel wires and specially coated glass fabric Temperature range: -60 °C to 600 °C, briefly up to 700 °C Delivery variants: other versions, dimensions and lengths available on request Technical Data: - Bending radius: 173.00mm - Physical state: GaseousFor commercial use, please observe the building regulations!
CHF 3,025.15
-
NORRES NORRES suction hose CP HiTex 481 inner Ø 350 mm ( 4501400490 )
Fri, 09/19/2025
Scope of Delivery: - Suction hose CP HiTex 481 inner Ø 350 mm Product Description: Applications: flexible hose for hot and cold gases, exhaust gas extraction, extraction of engine exhaust gases: Exhaust hose reels, suction slot ducts, above-floor/under-floor extraction systems, engine test benches, exhaust gas measurement, high-temperature extraction: Furnaces, foundries, blast furnaces, smelters, ceramics industry, glass industry, steelworks, aluminium smelters, bellows, expansion joint Properties: very good against flying sparks and welding spatter, abrasion protection due to external clamping profile, tension-resistant clamping of the wall in the clamping profile, very good heat resistance, flame-retardant in accordance with: DIN 4102-B1, RoHS compliant Construction: 1. clamping profile support spiral: completely stainless steel (INOX), 2. double-layer wall, wall: inside and outside reinforced with stainless steel wires and specially coated glass fabric Temperature range: -60 °C to 600 °C, briefly up to 700 °C Delivery variants: other versions, dimensions and lengths available on request Technical Data: - Bending radius: 153.00mm - Physical state: GaseousFor commercial use, please observe the building regulations!
CHF 2,693.08
-
NORRES NORRES suction hose CP HiTex 481 inner Ø 300 mm ( 4501400489 )
Fri, 09/19/2025
Scope of Delivery: - Suction hose CP HiTex 481 inner Ø 300 mm Product Description: Applications: flexible hose for hot and cold gases, exhaust gas extraction, extraction of engine exhaust gases: Exhaust hose reels, suction slot ducts, above-floor/under-floor extraction systems, engine test benches, exhaust gas measurement, high-temperature extraction: Furnaces, foundries, blast furnaces, smelters, ceramics industry, glass industry, steelworks, aluminium smelters, bellows, expansion joint Properties: very good against flying sparks and welding spatter, abrasion protection due to external clamping profile, tension-resistant clamping of the wall in the clamping profile, very good heat resistance, flame-retardant in accordance with: DIN 4102-B1, RoHS compliant Construction: 1. clamping profile support spiral: completely stainless steel (INOX), 2. double-layer wall, wall: inside and outside reinforced with stainless steel wires and specially coated glass fabric Temperature range: -60 °C to 600 °C, briefly up to 700 °C Delivery variants: other versions, dimensions and lengths available on request Technical Data: - Bending radius: 133.00mm - Physical state: GaseousFor commercial use, please observe the building regulations!
CHF 2,438.36
-
NORRES NORRES suction hose CP HiTex 481 inner Ø 250 mm ( 4501400488 )
Fri, 09/19/2025
Scope of Delivery: - Suction hose CP HiTex 481 inner Ø 250 mm Product Description: Applications: flexible hose for hot and cold gases, exhaust gas extraction, extraction of engine exhaust gases: Exhaust hose reels, suction slot ducts, above-floor/under-floor extraction systems, engine test benches, exhaust gas measurement, high-temperature extraction: Furnaces, foundries, blast furnaces, smelters, ceramics industry, glass industry, steelworks, aluminium smelters, bellows, expansion joint Properties: very good against flying sparks and welding spatter, abrasion protection due to external clamping profile, tension-resistant clamping of the wall in the clamping profile, very good heat resistance, flame-retardant in accordance with: DIN 4102-B1, RoHS compliant Construction: 1. clamping profile support spiral: completely stainless steel (INOX), 2. double-layer wall, wall: inside and outside reinforced with stainless steel wires and specially coated glass fabric Temperature range: -60 °C to 600 °C, briefly up to 700 °C Delivery variants: other versions, dimensions and lengths available on request Technical Data: - Bending radius: 113.00mm - Physical state: GaseousFor commercial use, please observe the building regulations!
CHF 1,900.34
-
NORRES NORRES suction hose CP HiTex 481 inner Ø 200-203 mm ( 4501400487 )
Fri, 09/19/2025
Scope of Delivery: - Suction hose CP HiTex 481 inner Ø 200-203 mm Product Description: Applications: flexible hose for hot and cold gases, exhaust gas extraction, extraction of engine exhaust gases: Exhaust hose reels, suction slot ducts, above-floor/under-floor extraction systems, engine test benches, exhaust gas measurement, high-temperature extraction: Furnaces, foundries, blast furnaces, smelters, ceramics industry, glass industry, steelworks, aluminium smelters, bellows, expansion joint Properties: very good against flying sparks and welding spatter, abrasion protection due to external clamping profile, tension-resistant clamping of the wall in the clamping profile, very good heat resistance, flame-retardant in accordance with: DIN 4102-B1, RoHS compliant Construction: 1. clamping profile support spiral: completely stainless steel (INOX), 2. double-layer wall, wall: inside and outside reinforced with stainless steel wires and specially coated glass fabric Temperature range: -60 °C to 600 °C, briefly up to 700 °C Delivery variants: other versions, dimensions and lengths available on request Technical Data: - Bending radius: 93.00mm - Physical state: GaseousFor commercial use, please observe the building regulations!
CHF 1,639.54
-
NORRES NORRES suction hose CP HiTex 481 inner Ø 160 mm ( 4501400486 )
Fri, 09/19/2025
Scope of Delivery: - Suction hose CP HiTex 481 inner Ø 160 mm Product Description: Applications: flexible hose for hot and cold gases, exhaust gas extraction, extraction of engine exhaust gases: Exhaust hose reels, suction slot ducts, above-floor/under-floor extraction systems, engine test benches, exhaust gas measurement, high-temperature extraction: Furnaces, foundries, blast furnaces, smelters, ceramics industry, glass industry, steelworks, aluminium smelters, bellows, expansion joint Properties: very good against flying sparks and welding spatter, abrasion protection due to external clamping profile, tension-resistant clamping of the wall in the clamping profile, very good heat resistance, flame-retardant in accordance with: DIN 4102-B1, RoHS compliant Construction: 1. clamping profile support spiral: completely stainless steel (INOX), 2. double-layer wall, wall: inside and outside reinforced with stainless steel wires and specially coated glass fabric Temperature range: -60 °C to 600 °C, briefly up to 700 °C Delivery variants: other versions, dimensions and lengths available on request Technical Data: - Bending radius: 77.00mm - Physical state: GaseousFor commercial use, please observe the building regulations!
CHF 1,101.07
-
NORRES NORRES suction hose CP HiTex 481 inner Ø 150-152 mm ( 4501400485 )
Fri, 09/19/2025
Scope of Delivery: - Suction hose CP HiTex 481 inner Ø 150-152 mm Product Description: Applications: flexible hose for hot and cold gases, exhaust gas extraction, extraction of engine exhaust gases: Exhaust hose reels, suction slot ducts, above-floor/under-floor extraction systems, engine test benches, exhaust gas measurement, high-temperature extraction: Furnaces, foundries, blast furnaces, smelters, ceramics industry, glass industry, steelworks, aluminium smelters, bellows, expansion joint Properties: very good against flying sparks and welding spatter, abrasion protection due to external clamping profile, tension-resistant clamping of the wall in the clamping profile, very good heat resistance, flame-retardant in accordance with: DIN 4102-B1, RoHS compliant Construction: 1. clamping profile support spiral: completely stainless steel (INOX), 2. double-layer wall, wall: inside and outside reinforced with stainless steel wires and specially coated glass fabric Temperature range: -60 °C to 600 °C, briefly up to 700 °C Delivery variants: other versions, dimensions and lengths available on request Technical Data: - Bending radius: 73.00mm - Physical state: GaseousFor commercial use, please observe the building regulations!
CHF 1,067.53
-
NORRES NORRES suction hose CP HiTex 481 inner Ø 125-127 mm ( 4501400484 )
Fri, 09/19/2025
Scope of Delivery: - Suction hose CP HiTex 481 inner Ø 125-127 mm Product Description: Applications: flexible hose for hot and cold gases, exhaust gas extraction, extraction of engine exhaust gases: Exhaust hose reels, suction slot ducts, above-floor/under-floor extraction systems, engine test benches, exhaust gas measurement, high-temperature extraction: Furnaces, foundries, blast furnaces, smelters, ceramics industry, glass industry, steelworks, aluminium smelters, bellows, expansion joint Properties: very good against flying sparks and welding spatter, abrasion protection due to external clamping profile, tension-resistant clamping of the wall in the clamping profile, very good heat resistance, flame-retardant in accordance with: DIN 4102-B1, RoHS compliant Construction: 1. clamping profile support spiral: completely stainless steel (INOX), 2. double-layer wall, wall: inside and outside reinforced with stainless steel wires and specially coated glass fabric Temperature range: -60 °C to 600 °C, briefly up to 700 °C Delivery variants: other versions, dimensions and lengths available on request Technical Data: - Bending radius: 63.00mm - Physical state: GaseousFor commercial use, please observe the building regulations!
CHF 1,021.38
-
NORRES NORRES suction hose CP HiTex 481 inner Ø 120 mm ( 4501400483 )
Fri, 09/19/2025
Scope of Delivery: - Suction hose CP HiTex 481 inner Ø 120 mm Product Description: Applications: flexible hose for hot and cold gases, exhaust gas extraction, extraction of engine exhaust gases: Exhaust hose reels, suction slot ducts, above-floor/under-floor extraction systems, engine test benches, exhaust gas measurement, high-temperature extraction: Furnaces, foundries, blast furnaces, smelters, ceramics industry, glass industry, steelworks, aluminium smelters, bellows, expansion joint Properties: very good against flying sparks and welding spatter, abrasion protection due to external clamping profile, tension-resistant clamping of the wall in the clamping profile, very good heat resistance, flame-retardant in accordance with: DIN 4102-B1, RoHS compliant Construction: 1. clamping profile support spiral: completely stainless steel (INOX), 2. double-layer wall, wall: inside and outside reinforced with stainless steel wires and specially coated glass fabric Temperature range: -60 °C to 600 °C, briefly up to 700 °C Delivery variants: other versions, dimensions and lengths available on request Technical Data: - Bending radius: 61.00mm - Physical state: GaseousFor commercial use, please observe the building regulations!
CHF 995.77
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"