Drill Bits
-
Ruko RUKO twist drill ULTIMATECUT FS DIN 338 type N ( 4000602976 ) nominal Ø 7.5 mm 109 mm 5xD right-hand cutting
Thu, 10/09/2025
Scope of Delivery: - 1x RUKO twist drill, nominal Ø 7.5 mm Product Description: HSS - DIN 338 - FLOWSTEP® point - point angle 118 ° - right-hand cutting - 3-face shank - precise centring without centre punching, even on round surfaces such as pipes drilling of large diameters without pre-drilling - easy and smooth drilling process, without jamming in the material - 3-face shank prevents spinning in the drill chuck - ideal for use in hand-held power tools - for non-ferrous metals, structural and carbon steels, tool steels, magnesium alloys, plastics as well as aluminium, Plexiglas and wood Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.15 mm/rev - Nominal Ø tolerance: h8 - Overall length: 109mm - Coating: bright/burnished - Nominal Ø: 7.5 mm - Overall length: 109 mm - Spiral length: 69 mm - Shank design: 3-face shank - Point angle: 118 ° - Receptacle Ø: 7.5 mm - Type: N - Standard: DIN 338 - Cutting material: HSS - Drilling depth: 5xD - Brand: RUKOFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 30.05
-
Ruko RUKO twist drill ULTIMATECUT FS DIN 338 type N ( 4000602977 ) nominal Ø 8 mm 117 mm 5xD right-hand cutting
Thu, 10/09/2025
Scope of Delivery: - 1x RUKO twist drill, nominal Ø 8 mm Product Description: HSS - DIN 338 - FLOWSTEP® point - point angle 118 ° - right-hand cutting - 3-face shank - precise centring without centre punching, even on round surfaces such as pipes drilling of large diameters without pre-drilling - easy and smooth drilling process, without jamming in the material - 3-face shank prevents spinning in the drill chuck - ideal for use in hand-held power tools - for non-ferrous metals, structural and carbon steels, tool steels, magnesium alloys, plastics as well as aluminium, Plexiglas and wood Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.16 mm/rev - Nominal Ø tolerance: h8 - Overall length: 117mm - Coating: bright/burnished - Nominal Ø: 8 mm - Overall length: 117 mm - Spiral length: 75 mm - Shank design: 3-face shank - Point angle: 118 ° - Receptacle Ø: 8 mm - Type: N - Standard: DIN 338 - Cutting material: HSS - Drilling depth: 5xD - Brand: RUKOFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 34.68
-
Ruko RUKO twist drill ULTIMATECUT FS DIN 338 type N ( 4000602970 ) nominal Ø 5 mm 86 mm 5xD right-hand cutting
Thu, 10/09/2025
Scope of Delivery: - 1x RUKO twist drill, nominal Ø 5 mm Product Description: HSS - DIN 338 - FLOWSTEP® point - point angle 118 ° - right-hand cutting - 3-face shank - precise centring without centre punching, even on round surfaces such as pipes drilling of large diameters without pre-drilling - easy and smooth drilling process, without jamming in the material - 3-face shank prevents spinning in the drill chuck - ideal for use in hand-held power tools - for non-ferrous metals, structural and carbon steels, tool steels, magnesium alloys, plastics as well as aluminium, Plexiglas and wood Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.1 mm/rev - Nominal Ø tolerance: h8 - Overall length: 86mm - Coating: bright/burnished - Nominal Ø: 5 mm - Total length: 86 mm - Spiral length: 52 mm - Shank design: 3-face shank - Point angle: 118 ° - Receptacle Ø: 5 mm - Type: N - Standard: DIN 338 - Cutting material: HSS - Drilling depth: 5xD - Brand: RUKOFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 36.51
-
Ruko RUKO twist drill ULTIMATECUT FS DIN 338 type N ( 4000602969 ) nominal Ø 4.5 mm 80 mm 5xD right-hand cutting
Thu, 10/09/2025
Scope of Delivery: - 1x RUKO twist drill, nominal Ø 4.5 mm Product Description: HSS - DIN 338 - FLOWSTEP® point - point angle 118 ° - right-hand cutting - 3-face shank - precise centring without centre punching, even on round surfaces such as pipes drilling of large diameters without pre-drilling - easy and smooth drilling process, without jamming in the material - 3-face shank prevents spinning in the drill chuck - ideal for use in hand-held power tools - for non-ferrous metals, structural and carbon steels, tool steels, magnesium alloys, plastics as well as aluminium, Plexiglas and wood Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.1 mm/rev - Nominal Ø tolerance: h8 - Overall length: 80mm - Coating: bright/burnished - Nominal Ø: 4.5 mm - Overall length: 80 mm - Spiral length: 47 mm - Shank design: 3-face shank - Point angle: 118 ° - Receptacle Ø: 4.5 mm - Type: N - Standard: DIN 338 - Cutting material: HSS - Drilling depth: 5xD - Brand: RUKOFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 35.57
-
Ruko RUKO twist drill ULTIMATECUT FS DIN 338 type N ( 4000602968 ) nominal Ø 4.2 mm 75 mm 5xD right-hand cutting
Thu, 10/09/2025
Scope of Delivery: - 1x RUKO twist drill, nominal Ø 4.2 mm Product Description: HSS - DIN 338 - FLOWSTEP® point - point angle 118 ° - right-hand cutting - 3-face shank - precise centring without centre punching, even on round surfaces such as pipes drilling of large diameters without pre-drilling - easy and smooth drilling process, without jamming in the material - 3-face shank prevents spinning in the drill chuck - ideal for use in hand-held power tools - for non-ferrous metals, structural and carbon steels, tool steels, magnesium alloys, plastics as well as aluminium, Plexiglas and wood Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.1 mm/rev - Nominal Ø tolerance: h8 - Overall length: 75mm - Coating: bright/burnished - Nominal Ø: 4.2 mm - Overall length: 75 mm - Spiral length: 43 mm - Shank design: 3-face shank - Point angle: 118 ° - Receptacle Ø: 4.2 mm - Type: N - Standard: DIN 338 - Cutting material: HSS - Drilling depth: 5xD - Brand: RUKOFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 34.72
-
Ruko RUKO twist drill ULTIMATECUT FS DIN 338 type N ( 4000602967 ) nominal Ø 4 mm 75 mm 5xD right-hand cutting
Thu, 10/09/2025
Scope of Delivery: - 1x RUKO twist drill, nominal Ø 4 mm Product Description: HSS - DIN 338 - FLOWSTEP® point - point angle 118 ° - right-hand cutting - 3-face shank - precise centring without centre punching, even on round surfaces such as pipes drilling of large diameters without pre-drilling - easy and smooth drilling process, without jamming in the material - 3-face shank prevents spinning in the drill chuck - ideal for use in hand-held power tools - for non-ferrous metals, structural and carbon steels, tool steels, magnesium alloys, plastics as well as aluminium, Plexiglas and wood Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.1 mm/rev - Nominal Ø tolerance: h8 - Overall length: 75mm - Coating: bright/burnished - Nominal Ø: 4 mm - Overall length: 75 mm - Spiral length: 43 mm - Shank design: 3-face shank - Point angle: 118 ° - Receptacle Ø: 4 mm - Type: N - Standard: DIN 338 - Cutting material: HSS - Drilling depth: 5xD - Brand: RUKOFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 29.59
-
Ruko RUKO twist drill ULTIMATECUT FS DIN 338 type N ( 4000602966 ) nominal Ø 3.5 mm 70 mm 5xD right-hand cutting
Thu, 10/09/2025
Scope of Delivery: - 1x RUKO twist drill, nominal Ø 3.5 mm Product Description: HSS - DIN 338 - FLOWSTEP® point - point angle 118 ° - right-hand cutting - 3-face shank - precise centring without centre punching, even on round surfaces such as pipes drilling of large diameters without pre-drilling - easy and smooth drilling process, without jamming in the material - 3-face shank prevents spinning in the drill chuck - ideal for use in hand-held power tools - for non-ferrous metals, structural and carbon steels, tool steels, magnesium alloys, plastics as well as aluminium, Plexiglas and wood Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.09 mm/rev - Nominal Ø tolerance: h8 - Overall length: 70mm - Coating: bright/burnished - Nominal Ø: 3.5 mm - Total length: 70 mm - Spiral length: 39 mm - Shank design: 3-face shank - Point angle: 118 ° - Receptacle Ø: 3.5 mm - Type: N - Standard: DIN 338 - Cutting material: HSS - Drilling depth: 5xD - Brand: RUKOFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 28.71
-
Ruko RUKO twist drill ULTIMATECUT FS DIN 338 type N ( 4000602965 ) nominal Ø 3.3 mm 65 mm 5xD right-hand cutting
Thu, 10/09/2025
Scope of Delivery: - 1x RUKO twist drill, nominal Ø 3.3 mm Product Description: HSS - DIN 338 - FLOWSTEP® point - point angle 118 ° - right-hand cutting - 3-face shank - precise centring without centre punching, even on round surfaces such as pipes drilling of large diameters without pre-drilling - easy and smooth drilling process, without jamming in the material - 3-face shank prevents spinning in the drill chuck - ideal for use in hand-held power tools - for non-ferrous metals, structural and carbon steels, tool steels, magnesium alloys, plastics as well as aluminium, Plexiglas and wood Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.08 mm/rev - Nominal Ø tolerance: h8 - Overall length: 65mm - Coating: bright/burnished - Nominal Ø: 3.3 mm - Overall length: 65 mm - Spiral length: 36 mm - Shank design: straight shank - Point angle: 118 ° - Receptacle Ø: 3.3 mm - Type: N - Standard: DIN 338 - Cutting material: HSS - Drilling depth: 5xD - Brand: RUKOFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 28.18
-
Ruko RUKO twist drill DIN 345 type N ( 4000601302 ) nominal Ø 12.5 mm 6xD right-hand cutting
Thu, 10/09/2025
Scope of Delivery: - 1x RUKO twist drill, nominal Ø 12.5 mm Product Description: HSS-Co5 - DIN 345 - type N - point angle 118 ° - right-hand cutting - pointed cross-cutting edge to DIN 1412 A - high-performance standard drill bit made of cobalt-alloyed HSS with higher heat resistance - ideal for drilling difficult-to-machine materials and for heavy-duty use Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.15 mm/rev - Shank size: MK1 - Quality: profile ground - Nominal Ø: 12.5 mm - Total length: 182 mm - Spiral length: 101 mm - Shank design: MK1 - Point angle: 118 ° - Type: N - Brand: RUKO - Standard: DIN 345 - Cutting material: HSS-Co5 - Drilling depth: 6xDFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 19.10
-
FLOTT Flott machine tool drilling package 3 with "felix" 2.0 100 ( 4683431013 ) suitable for TB 18 Plus and SB 23 Plus
Scope of Delivery: - 1x FLOTT drilling package 3 suitable for TB 18 Plus and SB 23 Plus Product Description: consisting of: Machine vice Flott "felix" 2.0 100 mm jaw width and 0-135 mm clamping width, jaw height 32 mm - Quick-action drill chuck B18 3-16 mm - Concentricity 0.17 mm - Taper mandrel MK2 B18 - Reducing sleeve MK2-MK1 Technical Data: - Suitable for: TB 18 Plus and SB 23 Plus - Brand: FLOTTFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
-
FLOTT Flott machine tool drilling package 1 with "felix" 2.0 80 ( 4683431010 ) suitable for TB 10 Plus
Scope of Delivery: - 1x FLOTT drilling package 1 suitable for TB 10 Plus Product Description: consisting of: Machine vice Flott "felix" 2.0 80 mm jaw width and 0-120 mm clamping width, jaw height 28 mm - Quick-action drill chuck B16 1-13 mm - Concentricity 0.17 mm Technical Data: - suitable for: TB 10 Plus - Brand: FLOTTFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
-
Ruko RUKO Einschnittgewindebohrer DIN 352 Form B M6x1 mm ( 8000421288 )
Lieferumfang:1x RUKO Einschnittgewindebohrer DIN 352 Form B M6x1 mmProduktbeschreibung: HSS · Form B · geradegenutet · Flanken hinterschliffen · metrisches ISO-Gewinde · DIN 13 Blatt 1 · Toleranzfeld ISO2 (6H) · mit Schälanschnitt · für Durchgangsgewinde · für unlegierte und niedriglegierte Stähle bis 800 N/mm² · das Gewinde kann von Hand und im Maschinengebrauch in einem Arbeitsgang geschnitten werden Weitere technische Daten: Beschichtung: Blank Form: B Schneidstoff: HSS
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"