Drill Bits
-
Ruko RUKO twist drill ULTIMATECUT FS DIN 338 type N ( 4000605530 ) nominal Ø 5 mm 86 mm 5xD right-hand cutting
Thu, 10/09/2025
Scope of Delivery: - 1x RUKO twist drill, nominal Ø 5 mm Product Description: HSS-Co5 - DIN 338 - FLOWSTEP® point - point angle 118 ° - right-hand cutting - 3-face shank - precise centring without centre punching, even on round surfaces such as pipes drilling of large diameters without pre-drilling - easy and smooth drilling process, without jamming in the material - 3-face shank prevents spinning in the drill chuck - ideal for use in hand-held power tools - for non-ferrous metals, structural and carbon steels, high-alloy steels (e.g. V2A/V4A), tool steels, magnesium alloys, plastics as well as aluminium, Plexiglas and wood Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.1 mm/rev - Nominal Ø tolerance: h8 - Overall length: 86mm - Coating: Gold - Nominal Ø: 5 mm - Total length: 86 mm - Spiral length: 52 mm - Shank design: 3-face shank - Point angle: 118 ° - Receptacle Ø: 5 mm - Type: N - Standard: DIN 338 - Cutting material: HSS-Co5 - Drilling depth: 5xD - Brand: RUKOFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 50.24
-
Ruko RUKO twist drill ULTIMATECUT FS DIN 338 type N ( 4000605527 ) nominal Ø 4 mm 75 mm 5xD right-hand cutting
Thu, 10/09/2025
Scope of Delivery: - 1x RUKO twist drill, nominal Ø 4 mm Product Description: HSS-Co5 - DIN 338 - FLOWSTEP® point - point angle 118 ° - right-hand cutting - 3-face shank - precise centring without centre punching, even on round surfaces such as pipes drilling of large diameters without pre-drilling - easy and smooth drilling process, without jamming in the material - 3-face shank prevents spinning in the drill chuck - ideal for use in hand-held power tools - for non-ferrous metals, structural and carbon steels, high-alloy steels (e.g. V2A/V4A), tool steels, magnesium alloys, plastics as well as aluminium, Plexiglas and wood Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.1 mm/rev - Nominal Ø tolerance: h8 - Overall length: 75mm - Coating: Gold - Nominal Ø: 4 mm - Total length: 75 mm - Spiral length: 43 mm - Shank design: 3-face shank - Point angle: 118 ° - Receptacle Ø: 4 mm - Type: N - Standard: DIN 338 - Cutting material: HSS-Co5 - Drilling depth: 5xD - Brand: RUKOFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 40.10
-
Ruko RUKO twist drill ULTIMATECUT FS DIN 338 type N ( 4000605525 ) nominal Ø 3.3 mm 65 mm 5xD right-hand cutting
Thu, 10/09/2025
Scope of Delivery: - 1x RUKO twist drill, nominal Ø 3.3 mm Product Description: HSS-Co5 - DIN 338 - FLOWSTEP® point - point angle 118 ° - right-hand cutting - 3-face shank - precise centring without centre punching, even on round surfaces such as pipes drilling of large diameters without pre-drilling - easy and smooth drilling process, without jamming in the material - 3-face shank prevents spinning in the drill chuck - ideal for use in hand-held power tools - for non-ferrous metals, structural and carbon steels, high-alloy steels (e.g. V2A/V4A), tool steels, magnesium alloys, plastics as well as aluminium, Plexiglas and wood Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.08 mm/rev - Nominal Ø tolerance: h8 - Overall length: 65mm - Coating: Gold - Nominal Ø: 3.3 mm - Total length: 65 mm - Spiral length: 36 mm - Shank design: straight shank - Point angle: 118 ° - Receptacle Ø: 3.3 mm - Type: N - Standard: DIN 338 - Cutting material: HSS-Co5 - Drilling depth: 5xD - Brand: RUKOFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 38.04
-
Ruko RUKO twist drill ULTIMATECUT FS DIN 338 type N ( 4000602972 ) nominal Ø 6 mm 93 mm 5xD right-hand cutting
Thu, 10/09/2025
Scope of Delivery: - 1x RUKO twist drill, nominal Ø 6 mm Product Description: HSS - DIN 338 - FLOWSTEP® point - point angle 118 ° - right-hand cutting - 3-face shank - precise centring without centre punching, even on round surfaces such as pipes drilling of large diameters without pre-drilling - easy and smooth drilling process, without jamming in the material - 3-face shank prevents spinning in the drill chuck - ideal for use in hand-held power tools - for non-ferrous metals, structural and carbon steels, tool steels, magnesium alloys, plastics as well as aluminium, Plexiglas and wood Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.12 mm/rev - Nominal Ø tolerance: h8 - Overall length: 93mm - Coating: bright/burnished - Nominal Ø: 6 mm - Overall length: 93 mm - Spiral length: 57 mm - Shank design: 3-face shank - Point angle: 118 ° - Receptacle Ø: 6 mm - Type: N - Standard: DIN 338 - Cutting material: HSS - Drilling depth: 5xD - Brand: RUKOFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 24.99
-
Ruko RUKO Spiralbohrer ULTIMATECUT FS DIN 338 Typ N ( 4000605522 ) Nenn-Ø 2 mm 49 mm 5xD rechtsschneidend
Lieferumfang:- 1x RUKO Spiralbohrer Nenn-Ø 2 mmProduktbeschreibung:HSS-Co5 · DIN 338 · FLOWSTEP®-Spitze · Spitzenwinkel 118 ° · rechtsschneidend · 3-Flächenschaft · punktgenaues Zentrieren ohne Ankörnen auch auf runden Oberflächen wie z. B. Rohren · extrem schnelles und kräfteschonendes Anbohren · Bohren von großen Durchmessern ohne Vorbohren · leichter und ruhiger Bohrvorgang, ohne verkanten im Material · 3-Flächenschaft verhindert das Durchdrehen im Bohrfutter · optimal geeignet für den Einsatz in handgeführten Elektro-Werkzeugen · für NE-Metalle, Bau- und Kohlenstoffstähle, hochlegierte Stähle (z.B. V2A/V4A), Werkzeugstähle, Magnesiumlegierungen, Kunststoffe sowie Aluminium, Plexiglas und HolzTechnische Daten:- Schneidrichtung: rechtsschneidend - Vorschub in Stahl bis 800 N: 0,05mm/U - Nenn-Ø-Toleranz: h8 - Baulänge: 49mm- Beschichtung: Gold - Nenn-Ø: 2 mm- Gesamtlänge: 49 mm- Spirallänge: 24 mm- Schaftausführung: Zylinderschaft - Spitzenwinkel: 118 °- Aufnahme-Ø: 2 mm- Typ: N - Norm: DIN 338 - Schneidstoff: HSS-Co5 - Bohrtiefe: 5xD - Marke: RUKOBei gewerblicher Nutzung beachten Sie bitte die Bauvorschriften!
-
Ruko RUKO twist drill ULTIMATECUT FS DIN 338 type N ( 4000602986 ) nominal Ø 12 mm 151 mm 5xD right-hand cutting
Thu, 10/09/2025
Scope of Delivery: - 1x RUKO twist drill, nominal Ø 12 mm Product Description: HSS - DIN 338 - FLOWSTEP® point - point angle 118 ° - right-hand cutting - 3-face shank - precise centring without centre punching, even on round surfaces such as pipes drilling of large diameters without pre-drilling - easy and smooth drilling process, without jamming in the material - 3-face shank prevents spinning in the drill chuck - ideal for use in hand-held power tools - for non-ferrous metals, structural and carbon steels, tool steels, magnesium alloys, plastics as well as aluminium, Plexiglas and wood Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.2 mm/rev - Nominal Ø tolerance: h8 - Overall length: 151mm - Coating: bright/burnished - Nominal Ø: 12 mm - Overall length: 151 mm - Spiral length: 101 mm - Shank design: 3-face shank - Point angle: 118 ° - Receptacle Ø: 12 mm - Type: N - Standard: DIN 338 - Cutting material: HSS - Drilling depth: 5xD - Brand: RUKOFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 18.53
-
Ruko RUKO twist drill ULTIMATECUT FS DIN 338 type N ( 4000602987 ) nominal Ø 12.5 mm 151 mm 5xD right-hand cutting
Thu, 10/09/2025
Scope of Delivery: - 1x RUKO twist drill, nominal Ø 12.5 mm Product Description: HSS - DIN 338 - FLOWSTEP® point - point angle 118 ° - right-hand cutting - 3-face shank - precise centring without centre punching, even on round surfaces such as pipes drilling of large diameters without pre-drilling - easy and smooth drilling process, without jamming in the material - 3-face shank prevents spinning in the drill chuck - ideal for use in hand-held power tools - for non-ferrous metals, structural and carbon steels, tool steels, magnesium alloys, plastics as well as aluminium, Plexiglas and wood Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.2 mm/rev - Nominal Ø tolerance: h8 - Overall length: 151mm - Coating: bright/burnished - Nominal Ø: 12.5 mm - Overall length: 151 mm - Spiral length: 101 mm - Shank design: 3-face shank - Point angle: 118 ° - Receptacle Ø: 12.5 mm - Type: N - Standard: DIN 338 - Cutting material: HSS - Drilling depth: 5xD - Brand: RUKOFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 19.00
-
Ruko RUKO twist drill ULTIMATECUT FS DIN 338 type N ( 4000602985 ) nominal Ø 11.5 mm 142 mm 5xD right-hand cutting
Scope of Delivery: - 1x RUKO twist drill, nominal Ø 11.5 mm Product Description: HSS - DIN 338 - FLOWSTEP® point - point angle 118 ° - right-hand cutting - 3-face shank - precise centring without centre punching, even on round surfaces such as pipes drilling of large diameters without pre-drilling - easy and smooth drilling process, without jamming in the material - 3-face shank prevents spinning in the drill chuck - ideal for use in hand-held power tools - for non-ferrous metals, structural and carbon steels, tool steels, magnesium alloys, plastics as well as aluminium, Plexiglas and wood Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.2 mm/rev - Nominal Ø tolerance: h8 - Overall length: 142mm - Coating: bright/burnished - Nominal Ø: 11.5 mm - Overall length: 142 mm - Spiral length: 94 mm - Shank design: 3-face shank - Point angle: 118 ° - Receptacle Ø: 11.5 mm - Type: N - Standard: DIN 338 - Cutting material: HSS - Drilling depth: 5xD - Brand: RUKOFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
-
Ruko RUKO twist drill ULTIMATECUT FS DIN 338 type N ( 4000602988 ) nominal Ø 13 mm 151 mm 5xD right-hand cutting
Thu, 10/09/2025
Scope of Delivery: - 1x RUKO twist drill, nominal Ø 13 mm Product Description: HSS - DIN 338 - FLOWSTEP® point - point angle 118 ° - right-hand cutting - 3-face shank - precise centring without centre punching, even on round surfaces such as pipes drilling of large diameters without pre-drilling - easy and smooth drilling process, without jamming in the material - 3-face shank prevents spinning in the drill chuck - ideal for use in hand-held power tools - for non-ferrous metals, structural and carbon steels, tool steels, magnesium alloys, plastics as well as aluminium, Plexiglas and wood Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.21 mm/rev - Nominal Ø tolerance: h8 - Overall length: 151mm - Coating: bright/burnished - Nominal Ø: 13 mm - Total length: 151 mm - Spiral length: 101 mm - Shank design: 3-face shank - Point angle: 118 ° - Receptacle Ø: 13 mm - Type: N - Standard: DIN 338 - Cutting material: HSS - Drilling depth: 5xD - Brand: RUKOFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 19.45
-
Ruko RUKO twist drill ULTIMATECUT FS DIN 338 type N ( 4000602975 ) nominal Ø 7 mm 109 mm 5xD right-hand cutting
Thu, 10/09/2025
Scope of Delivery: - 1x RUKO twist drill, nominal Ø 7 mm Product Description: HSS - DIN 338 - FLOWSTEP® point - point angle 118 ° - right-hand cutting - 3-face shank - precise centring without centre punching, even on round surfaces such as pipes drilling of large diameters without pre-drilling - easy and smooth drilling process, without jamming in the material - 3-face shank prevents spinning in the drill chuck - ideal for use in hand-held power tools - for non-ferrous metals, structural and carbon steels, tool steels, magnesium alloys, plastics as well as aluminium, Plexiglas and wood Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.14 mm/rev - Nominal Ø tolerance: h8 - Overall length: 109mm - Coating: bright/burnished - Nominal Ø: 7 mm - Overall length: 109 mm - Spiral length: 69 mm - Shank design: 3-face shank - Point angle: 118 ° - Receptacle Ø: 7 mm - Type: N - Standard: DIN 338 - Cutting material: HSS - Drilling depth: 5xD - Brand: RUKOFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 28.71
-
Ruko RUKO twist drill ULTIMATECUT FS DIN 338 type N ( 4000602982 ) nominal Ø 10.2 mm 133 mm 5xD right-hand cutting
Thu, 10/09/2025
Scope of Delivery: - 1x RUKO twist drill, nominal Ø 10.2 mm Product Description: HSS - DIN 338 - FLOWSTEP® point - point angle 118 ° - right-hand cutting - 3-face shank - precise centring without centre punching, even on round surfaces such as pipes drilling of large diameters without pre-drilling - easy and smooth drilling process, without jamming in the material - 3-face shank prevents spinning in the drill chuck - ideal for use in hand-held power tools - for non-ferrous metals, structural and carbon steels, tool steels, magnesium alloys, plastics as well as aluminium, Plexiglas and wood Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.2 mm/rev - Nominal Ø tolerance: h8 - Overall length: 133mm - Coating: bright/burnished - Nominal Ø: 10.2 mm - Overall length: 133 mm - Spiral length: 87 mm - Shank design: 3-face shank - Point angle: 118 ° - Receptacle Ø: 10.2 mm - Type: N - Standard: DIN 338 - Cutting material: HSS - Drilling depth: 5xD - Brand: RUKOFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 16.96
-
Ruko RUKO twist drill ULTIMATECUT FS DIN 338 type N ( 4000602981 ) nominal Ø 10 mm 133 mm 5xD right-hand cutting
Thu, 10/09/2025
Scope of Delivery: - 1x RUKO twist drill, nominal Ø 10 mm Product Description: HSS - DIN 338 - FLOWSTEP® point - point angle 118 ° - right-hand cutting - 3-face shank - precise centring without centre punching, even on round surfaces such as pipes drilling of large diameters without pre-drilling - easy and smooth drilling process, without jamming in the material - 3-face shank prevents spinning in the drill chuck - ideal for use in hand-held power tools - for non-ferrous metals, structural and carbon steels, tool steels, magnesium alloys, plastics as well as aluminium, Plexiglas and wood Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.2 mm/rev - Nominal Ø tolerance: h8 - Overall length: 133mm - Coating: bright/burnished - Nominal Ø: 10 mm - Overall length: 133 mm - Spiral length: 87 mm - Shank design: 3-face shank - Point angle: 118 ° - Receptacle Ø: 10 mm - Type: N - Standard: DIN 338 - Cutting material: HSS - Drilling depth: 5xD - Brand: RUKOFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 15.12
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"