Only this week: 10% off all BOSCH power tools - discount will be deducted in the shopping cart

Direkt ist günstiger für Dich!Direkt ist günstiger für Dich!

Wusstest du, dass Preisvergleich-Plattformen und Suchmaschinen bei jedem Kauf fett mitverdienen? Über 20 % vom Preis gehen nur für Werbung drauf – und das zahlen am Ende alle mit. Wir sagen: Nein danke und möchten die Werbekosten lieber als Preisreduktion an Euch weitergeben!

Aus diesem Grund übermitteln wir nicht mehr unseren gesamten Bestand, die Bestpreis-Angebote und Deals an die großen Plattformen und können Dir so - neben den Geschenken, BROpoints und anderen Vorteilen - wesentlich bessere Preise geben, die Du ausschließlich bei uns findest. Deswegen lohnt es sich, ohne Umwege, direkt zu uns zu kommen.

Initiative für bessere Preise und mehr Fairness im Online-Handel.

Finde hier ALLE ANGEBOTE, für die wir derzeit den Online-Bestpreis haben.

Drill Bit Sets

1396 products

Filter

Show previous products

  • RUKO Einschnittgewindebohrer DIN 352 Form B M10x1,5 mm ( 8000421283 )

    Options

    Ruko RUKO Einschnittgewindebohrer DIN 352 Form B M10x1,5 mm ( 8000421283 )

    Lieferumfang:Einschnittgewindebohrer DIN 352 Form B M10x1,5 mmProduktbeschreibung:HSS · Form B · geradegenutet · Flanken hinterschliffen · metrisches ISO-Gewinde · DIN 13 Blatt 1 · Toleranzfeld ISO2 (6H) · mit Schälanschnitt · für Durchgangsgewinde · für unlegierte und niedriglegierte Stähle bis 800 N/mm² · das Gewinde kann von Hand und im Maschinengebrauch in einem Arbeitsgang geschnitten werden Technische Daten: Beschichtung: Blank Form: B Schneidstoff: HSS

    Read more

    Pre-order

    CHF 14.01

    Options

  • HELLER Hammer drill Trijet Ultimate D.8,0mm Working-L.100mm L.160mm ( 4300000173 )

    HELLER HELLER Hammer drill Trijet Ultimate D.8,0mm Working-L.100mm L.160mm ( 4300000173 )

    Sat, 12/06/2025

    Scope of Delivery: - Hammer drill Trijet Ultimate D.8,0mm Working-L.100mm L.160mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!

    Read more

    1 - 2 business days

    CHF 14.63

  • HELLER Hammer drill Y-Cutter Ergo D.24 mm Working-L.400 mm L.450 mm ( 8000656332 )

    HELLER HELLER Hammer drill Y-Cutter Ergo D.24 mm Working-L.400 mm L.450 mm ( 8000656332 )

    Sat, 12/06/2025

    Scope of Delivery: - Hammer drill Y-Cutter Ergo D.24 mm Working-L.400 mm L.450 mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 160°For commercial use, please observe the building regulations!

    Read more

    1 - 2 business days

    CHF 80.18

  • HELLER hammer drill Trijet Ultimate D.6,0mm Working-L.100mm L.160mm ( 4300000172 )

    HELLER HELLER hammer drill Trijet Ultimate D.6,0mm Working-L.100mm L.160mm ( 4300000172 )

    Sat, 12/06/2025

    Scope of Delivery: - Hammer drill Trijet Ultimate D.6,0mm Working-L.100mm L.160mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!

    Read more

    1 - 2 business days

    CHF 13.34

  • HELLER hammer drill Trijet Ultimate D.14,0mm Working-L.250mm L.300mm ( 4300000185 )

    Options

    HELLER HELLER hammer drill Trijet Ultimate D.14,0mm Working-L.250mm L.300mm ( 4300000185 )

    Scope of Delivery: - Hammer drill Trijet Ultimate D.14,0mm Working-L.250mm L.300mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!

    Read more

    Pre-order

    CHF 32.51

    Options

  • HELLER hammer drill Trijet Ultimate D.10,0mm Working-L.150mm L.210mm ( 4300000178 )

    HELLER HELLER hammer drill Trijet Ultimate D.10,0mm Working-L.150mm L.210mm ( 4300000178 )

    Sat, 12/06/2025

    Scope of Delivery: - Hammer drill Trijet Ultimate D.10,0mm Working-L.150mm L.210mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!

    Read more

    1 - 2 business days

    CHF 17.81

  • HELLER hammer drill Trijet Ø 8 mm working l.400 mm l.460 mm ( 8000656694 )

    HELLER HELLER hammer drill Trijet Ø 8 mm working l.400 mm l.460 mm ( 8000656694 )

    Sat, 12/06/2025

    Scope of Delivery: - Hammer drill Trijet Ø 8 mm working l.400 mm l.460 mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!

    Read more

    1 - 2 business days

    CHF 32.51

  • HELLER hammer drill Trijet Ø 12 mm working l.200 mm l.260 mm ( 8000656699 )

    HELLER HELLER hammer drill Trijet Ø 12 mm working l.200 mm l.260 mm ( 8000656699 )

    Sat, 12/06/2025

    Scope of Delivery: - Hammer drill Trijet Ø 12 mm working l.200 mm l.260 mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!

    Read more

    1 - 2 business days

    CHF 21.65

  • HELLER Trijet hammer drill bit Ø 14 mm working length 100 mm length 160 mm ( 8000656702 )

    HELLER HELLER Trijet hammer drill bit Ø 14 mm working length 100 mm length 160 mm ( 8000656702 )

    Sat, 12/06/2025

    Scope of Delivery: - Hammer drill Trijet Ø 14 mm working l.100 mm l.160 mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!

    Read more

    1 - 2 business days

    CHF 22.93

  • HELLER hammer drill Trijet Ø 12 mm working l.400 mm l.450 mm ( 8000656700 )

    Options

    HELLER HELLER hammer drill Trijet Ø 12 mm working l.400 mm l.450 mm ( 8000656700 )

    Scope of Delivery: - Hammer drill Trijet Ø 12 mm working l.400 mm l.450 mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!

    Read more

    Pre-order

    CHF 32.51

    Options

  • BOSCH Hammer drill Plus-5 Ø 6.0 mm working length 400 mm length 465 mm ( 8000341457 )

    Options

    Bosch BOSCH Hammer drill Plus-5 Ø 6.0 mm working length 400 mm length 465 mm ( 8000341457 )

    25 Reviews

    Scope of Delivery: - Hammer drill Plus-5 Ø 6.0 mm working length 400 mm length 465 mm Product Description: with SDS-plus holder - Serrated carbide for smooth work without seizing - Activteq centre point ensures active cutting in concrete and a precise hole diameter - AWB brazing and hardening technology reduces vibrations during drilling to reduce user strain - 2 cutting edges Technical Data: - nanFor commercial use, please observe the building regulations!

    Read more

    Pre-order

    CHF 20.83

    Options

  • BOSCH hammer drill Plus-5 Ø 25.0 mm working length 550 mm length 600 mm ( 8000341437 )

    Options

    Bosch BOSCH hammer drill Plus-5 Ø 25.0 mm working length 550 mm length 600 mm ( 8000341437 )

    25 Reviews

    Scope of Delivery: - Hammer drill Plus-5 Ø 25.0 mm working length 550 mm length 600 mm Product Description: with SDS-plus holder - Serrated carbide for smooth work without seizing - Activteq centre point ensures active cutting in concrete and a precise hole diameter - AWB brazing and hardening technology reduces vibrations during drilling to reduce user strain - 2 cutting edges Technical Data: - nanFor commercial use, please observe the building regulations!

    Read more

    Pre-order

    CHF 69.83

    Options

I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"

Show more products

Log in

Forgot your password?

Don't have an account yet?
Create account