Cleaning Tools
-
RIEGLER Riegler blow gun ( 8002727022 ) Coupling plug with standard nozzle
Wed, 10/22/2025
Scope of Delivery: - 1x RIEGLER blow gun coupling plug Product Description: Adjustable blow gun - standard nozzle - can be connected at the bottom - for blowing out and cleaning machines, motors, bearings, sliding surfaces, bores of all kinds, hollow bodies, moulds, etc. Technical Data: - Nozzle type: Standard nozzle - Connection type: Coupling plug - Connection: DN 7.2 - Version: with standard nozzle - Gun body: Polypropylene (PP) - Nozzle thread connection: Nipple NW 7.2 - Operating temperature: -10 to 90 °C - Housing: Plastic - Operating pressure: 12 bar - Brand: RIEGLERFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 20.46
-
PFERD PFERD cup brush TBU ST ( 8000435468 ) Ø 70 mm shaft wire thickness 0.2 mm
Scope of Delivery: - 1x PFERD cup brush Ø 70 mm shaft wire thickness 0.2 mm Product Description: Universal for cleaning, derusting and smoothing as well as removing corrosion and paint - Suitable for brushing work on large, flat and easily accessible surfaces - With plastic-coated brush body. Steel wire has high tensile and flexural fatigue strength - ensures optimum wear of the wire and a long service life, even in extreme brushing applications Steel wire can withstand temperatures of up to 300 °C. Shank Ø 6 mm Technical Data: - Drive type: Flexible shaft drive, drilling machine, straight grinder - Application recommendation: Please observe the recommended speeds. For best performance, use a tool drive with at least 300 watts. - Mounting system: Shank - Machinable materials: Steel, cast steel, cast iron, elastomers, thermoplastics, wood, thermosets - Machining tasks: Deburring, derusting, removing oxide layers, cleaning, roughening, paint stripping - Filament material: Steel wire (ST) - Width: 15mm - Length, facing: 22mm - Length, total: 80mm - Ø outside: 70mm - Ø trim material: 0.2mm - Ø shaft: 6mm - RPM, opt., up to: 4500RPM - RPM, opt., from: 3000RPM - Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm. - Advantages: Produces fine surfaces. Long tool life thanks to the use of PFERD special wire. Optimum adaptation to the contour of the workpieces thanks to high flexibility. - RPM, max.: 6000RPM - Ø: 70 mm - Fill width: 15 mm - Fill length: 22 mm - Wire thickness: 0.2 mm - recommended speed: 3000 - 4500 min-¹ - Mounting: Shank - Brand: PFERD - Material: Steel - Shank Ø: 6 mmFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
-
PFERD PFERD cup brush TBU INOX ( 8000435473 ) Ø 50 mm wire thickness 0.3 mm
Wed, 10/22/2025
Scope of Delivery: - 1x PFERD cup brush Ø 50 mm wire thickness 0.3 mm Product Description: can be used universally for cleaning, derusting and smoothing as well as removing corrosion and paint - for brushing work on large, flat and easily accessible surfaces - INOX trim blue for use on all stainless steels (INOX), such as V4A. Stainless steel wire (INOX) withstands temperatures up to 450 °C. Cup brush with plastic-coated brush body. Shaft Ø 6 mm Technical Data: - Drive type: Flexible shaft drive, straight grinder, drill - Application recommendation: For best performance, use a tool drive with at least 300 watts. Please observe the recommended speeds. - Mounting system: Shank - Machinable materials: Other non-ferrous metals, soft titanium alloys (tensile strength 500 N/mm²), titanium alloys, titanium, nickel-based alloys (e.g. Inconell and Hasteloy), stainless steel (INOX), nickel or titanium-based superalloys, high-temperature materials, hard non-ferrous metal, cobalt-based alloys, aluminium, bronze - Machining tasks: Rust removal, tarnish removal, oxide layer removal, paint stripping, roughening, cleaning, deburring - Filament material: Stainless steel wire (INOX) - Width: 10mm - Length, trim: 20mm - Length, total: 75mm - Ø outside: 50mm - Ø trim material: 0.3mm - Ø shaft: 6mm - RPM, opt., up to: 6800RPM - RPM, opt., from: 4200RPM - Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm. - Advantages: Produces fine surfaces. Very good corrosion resistance. Optimum adaptation to the contour of the workpieces thanks to high flexibility. Low risk of contamination of the workpiece. - RPM, max.: 10500RPM - Ø: 50 mm - Wire thickness: 0.3 mm - Material suitability INOX: very suitable - Brand: PFERD - Material: Stainless steel - Material suitability lacquer: very suitablePlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!
CHF 17.77
-
PFERD PFERD cup brush POS TBG ST ( 8000435481 ) Ø 65 mm M14 wire thickness 0.35 mm
Wed, 10/22/2025
Scope of Delivery: - 1x PFERD cup brush Ø 65 mm M14 wire thickness 0.35 mm Product Description: for heavy-duty brushing work such as deburring, cleaning, derusting and descaling as well as for removing weld spatter - fill material has high tensile and flexural fatigue strength - ensures optimum wear of the wire and a long service life, even in extreme brushing applications Steel wire withstands temperatures of up to 300 °C - M14 Technical Data: - Drive type: Angle grinder - Application recommendation: Please observe the recommended speeds. For optimum results, use on powerful angle grinders. - Number of teeth: 18 pieces - Mounting system: Thread - Machinable materials: Steel, cast steel, cast iron - Machining tasks: Root seam processing, cleaning, weld seam processing, paint stripping, removing oxide layers, descaling, derusting, deburring, fillet weld processing - Cladding material: Steel wire (ST) - Grit size: not specified - Length, fill: 22mm - Ø outside: 65mm - Ø fill material: 0.35mm - Ø thread: M14x2 - RPM, opt., up to: 12500RPM - RPM, opt., from: 6300RPM - Packaging: POS packaging - Advantages: Long service life thanks to the use of PFERD special wire. Aggressive brushing effect due to high rigidity of the wire tufts. - RPM, max.: 12500RPM - Ø: 65 mm - Filament length: 22 mm - Wire thickness: 0.35 mm - Mounting: M14 - Material suitability cast iron: very suitable - Material suitability steel: very suitable - Brand: PFERD - Material: SteelPlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!
CHF 16.52
-
PFERD PFERD cup brush POS TBG ST ( 8000435482 ) Ø 65 mm M14 wire thickness 0.5 mm
Wed, 10/22/2025
Scope of Delivery: - 1x PFERD cup brush Ø 65 mm M14 wire thickness 0.5 mm Product Description: for heavy-duty brushing work such as deburring, cleaning, derusting and descaling as well as for removing weld spatter - fill material has high tensile and flexural fatigue strength - ensures optimum wear of the wire and a long service life, even in extreme brushing applications Steel wire withstands temperatures of up to 300 °C - M14 Technical Data: - Drive type: Angle grinder - Application recommendation: For optimum results, use on powerful angle grinders. Please observe the recommended speeds. - Number, braids: 18 pieces - Mounting system: Thread - Machinable materials: Steel, cast steel, cast iron - Machining tasks: Rust removal, root seam machining, deburring, cleaning, descaling, removing oxide layers, paint stripping, fillet weld machining, weld seam machining - Cladding material: Steel wire (ST) - Grit size: not specified - Length, fill: 22mm - Ø outside: 65mm - Ø facing material: 0.5mm - Ø thread: M14x2 - RPM, opt., up to: 12500RPM - RPM, opt., from: 6300RPM - Packaging: POS packaging - Advantages: Long service life thanks to the use of PFERD special wire. Aggressive brushing effect due to high rigidity of the wire tufts. - RPM, max.: 12500RPM - Ø: 65 mm - Fill length: 22 mm - Wire thickness: 0.5 mm - Mounting: M14 - Material suitability cast iron: very suitable - Material suitability steel: very suitable - Brand: PFERD - Material: SteelFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 15.98
-
PFERD PFERD round brush RBU ST ( 8000433022 ) Ø 80 mm wire thickness 0.2 mm
Wed, 10/22/2025
Scope of Delivery: - 1x PFERD round brush Ø 80 mm wire thickness 0.2 mm Product Description: for cleaning, derusting, smoothing, cleaning weld seams, light deburring and removing corrosion and paint - steel wire trim material has high tensile and flexural fatigue strength - ensures optimum wear of the wire and a long service life, even in extreme brushing applications Steel wire can withstand temperatures up to 300 °C. Shank Ø 6 mm Technical Data: - Drive type: Straight grinder, flexible shaft drive, drill - Application recommendation: For best performance, use a tool drive with at least 300 watts. Please observe the recommended speeds. - Mounting system: Shank - Machinable materials: Wood, cast iron, thermosets, elastomers, thermoplastics, steel, cast steel - Machining tasks: Rust removal, deburring, paint stripping, cleaning, roughening, removing oxide layers - Filament material: Steel wire (ST) - Length, fill: 10mm - Ø fill material: 0.2mm - Ø shaft: 6mm - RPM, opt., up to: 9000RPM - RPM, opt., from: 6000RPM - Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm. - Packaging: Industrial packaging - Advantages: Long tool life thanks to the use of PFERD special wire. Produces fine surfaces. Optimum adaptation to the contour of the workpieces thanks to high flexibility. - RPM, max.: 12000RPM - Ø: 80 mm - Fill width: 4 mm - Fill length: 41 mm - Wire thickness: 0.2 mm - Material suitability cast iron: very suitable - Material suitability steel: very suitable - Brand: PFERD - Material: Steel - Shank Ø: 6 mm - Material suitability wood: very suitable - Material suitability plastic: very suitableFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 15.14
-
PFERD PFERD round brush RBU INOX ( 8000433050 ) Ø 80 mm wire thickness 0.15 mm
Scope of Delivery: - 1x PFERD round brush Ø 80 mm wire thickness 0.15 mm Product Description: for cleaning, derusting, smoothing, cleaning weld seams, light deburring and removing corrosion and paint - very good corrosion resistance with optimum service life - INOX trim blue for use on all stainless steels (INOX), such as V4A. Stainless steel wire (INOX) withstands temperatures up to 450 °C - Shank Ø 6 mm Technical Data: - Drive type: Drill, straight grinder, flexible shaft drive - Application recommendation: For best performance, use a tool drive with at least 300 watts. Please observe the recommended speeds. - Mounting system: Shank - Machinable materials: Stainless steel (INOX), titanium alloys, soft titanium alloys (tensile strength 500 N/mm²), titanium, aluminium, cobalt-based alloys, other non-ferrous metals, bronze, high-temperature materials, nickel-based alloys (e.g. Inconell and Hasteloy), hard non-ferrous metal, nickel or titanium-based superalloys - Machining tasks: Cleaning, deburring, derusting, removing annealing colours, removing oxide layers, paint stripping, roughening - Filament material: Stainless steel wire (INOX) - Length, filament: 19mm - Ø fill material: 0.15mm - Ø shaft: 6mm - RPM, opt., up to: 7800RPM - RPM, opt., from: 4800RPM - Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm. - Packaging: Industrial packaging - Advantages: Produces fine surfaces. Optimum adaptation to the contour of the workpieces thanks to high flexibility. Very good corrosion resistance. - RPM, max.: 12000RPM - Ø: 80 mm - Fill width: 15 mm - Fill length: 50 mm - Wire thickness: 0.15 mm - Material suitability INOX: very suitable - Brand: PFERD - Material: Stainless steel - Shank Ø: 6 mm - Material suitability lacquer: very suitablePlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!
-
PFERD PFERD round brush RBU ST ( 8000433021 ) Ø 70 mm wire thickness 0.3 mm
Wed, 10/22/2025
Scope of Delivery: - 1x PFERD round brush Ø 70 mm wire thickness 0.3 mm Product Description: for cleaning, derusting, smoothing, cleaning weld seams, light deburring and removing corrosion and paint - steel wire trim material has high tensile and flexural fatigue strength - ensures optimum wear of the wire and a long service life, even in extreme brushing applications Steel wire can withstand temperatures up to 300 °C. Shank Ø 6 mm Technical Data: - Drive type: Flexible shaft drive, drilling machine, straight grinder - Application recommendation: Please observe the recommended speeds. For best performance, use a tool drive with at least 300 watts. - Mounting system: Shank - Machinable materials: Wood, thermoplastics, steel, cast steel, elastomers, thermosets, cast iron - Machining tasks: Deburring, derusting, removing oxide layers, paint stripping, roughening, cleaning - Filament material: Steel wire (ST) - Length, filament: 19mm - Ø fill material: 0.3mm - Ø shank: 6mm - RPM, opt., up to: 11300RPM - RPM, opt., from: 7500RPM - Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm. - Packaging: Industrial packaging - Advantages: Produces fine surfaces. Long tool life thanks to the use of PFERD special wire. Optimum adaptation to the contour of the workpieces thanks to high flexibility. - RPM, max.: 15000RPM - Ø: 70 mm - Fill width: 15 mm - Fill length: 50 mm - Wire thickness: 0.3 mm - Material suitability cast iron: very suitable - Material suitability steel: very suitable - Brand: PFERD - Material: Steel - Shank Ø: 6 mm - Material suitability wood: very suitable - Material suitability plastic: very well suitedFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 13.51
-
PFERD PFERD round brush RBU ST ( 8000433012 ) Ø 30 mm wire thickness 0.2 mm
Wed, 10/22/2025
Scope of Delivery: - 1x PFERD round brush Ø 30 mm wire thickness 0.2 mm Product Description: for cleaning, derusting, smoothing, cleaning weld seams, light deburring and removing corrosion and paint - steel wire trim material has high tensile and flexural fatigue strength - ensures optimum wear of the wire and a long service life, even in extreme brushing applications Steel wire can withstand temperatures up to 300 °C. Shank Ø 6 mm Technical Data: - Drive type: Straight grinder, drilling machine, flexible shaft drive - Application recommendation: Please observe the recommended speeds. For best performance, use a tool drive with at least 300 watts. - Mounting system: Shank - Machinable materials: Thermoplastics, cast iron, thermosets, steel, cast steel, wood, elastomers - Machining tasks: Paint stripping, cleaning, deburring, removing oxide layers, roughening, rust removal - Filament material: Steel wire (ST) - Length, filament: 7mm - Ø fill material: 0.2mm - Ø shank: 6mm - RPM, opt., up to: 15000RPM - RPM, opt., from: 10000RPM - Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm. - Packaging: Industrial packaging - Advantages: Long tool life thanks to the use of PFERD special wire. Produces fine surfaces. Optimum adaptation to the contour of the workpieces thanks to high flexibility. - RPM, max.: 20000RPM - Ø: 30 mm - Fill width: 9 mm - Fill length: 42 mm - Wire thickness: 0.2 mm - Material suitability cast iron: very suitable - Material suitability steel: very suitable - Brand: PFERD - Material: Steel - Shank Ø: 6 mm - Material suitability wood: very suitable - Material suitability plastic: very well suitedFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 12.62
-
PFERD PFERD round brush RBU INOX ( 8000433037 ) Ø 30 mm wire thickness 0.2 mm
Wed, 10/22/2025
Scope of Delivery: - 1x PFERD round brush Ø 30 mm wire thickness 0.2 mm Product Description: for cleaning, derusting, smoothing, cleaning weld seams, light deburring and removing corrosion and paint - very good corrosion resistance with optimum service life - INOX trim blue for use on all stainless steels (INOX), such as V4A. Stainless steel wire (INOX) withstands temperatures up to 450 °C - Shank Ø 6 mm Technical Data: - Drive type: Straight grinder, flexible shaft drive, drill - Application recommendation: For best performance, use a tool drive with at least 300 watts. Please observe the recommended speeds. - Mounting system: Shank - Machinable materials: High temperature materials, nickel-based alloys (e.g. Inconell and Hasteloy), aluminium, bronze, hard non-ferrous metal, cobalt-based alloys, nickel or titanium-based superalloys, other non-ferrous metals, soft titanium alloys (tensile strength 500 N/mm²), stainless steel (INOX), titanium, titanium alloys - Machining tasks: Cleaning, roughening, paint stripping, removing oxide layers, removing annealing colours, derusting, deburring - Filament material: Stainless steel wire (INOX) - Length, filament: 7mm - Ø fill material: 0.2mm - Ø shank: 6mm - RPM, opt., up to: 13000RPM - RPM, opt., from: 8000RPM - Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm. - Packaging: Industrial packaging - Advantages: Optimum adaptation to the contour of the workpieces thanks to high flexibility. Produces fine surfaces. Very good corrosion resistance. - RPM, max.: 20000RPM - Ø: 30 mm - Fill width: 9 mm - Filament length: 42 mm - Wire thickness: 0.2 mm - Material suitability INOX: very suitable - Brand: PFERD - Material: Stainless steel - Shank Ø: 6 mm - Material suitability lacquer: very suitablePlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!
CHF 14.31
-
PFERD PFERD round brush RBU INOX ( 8000433049 ) Ø 80 mm wire thickness 0.2 mm
Scope of Delivery: - 1x PFERD round brush Ø 80 mm wire thickness 0.2 mm Product Description: for cleaning, derusting, smoothing, cleaning weld seams, light deburring and removing corrosion and paint - very good corrosion resistance with optimum service life - INOX trim blue for use on all stainless steels (INOX), such as V4A. Stainless steel wire (INOX) withstands temperatures up to 450 °C - Shank Ø 6 mm Technical Data: - Drive type: Flexible shaft drive, straight grinder, drilling machine - Application recommendation: Please observe the recommended speeds. For best performance, use a tool drive with at least 300 watts. - Mounting system: Shank - Machinable materials: Stainless steel (INOX), cobalt-based alloys, bronze, hard non-ferrous metals, high-temperature materials, other non-ferrous metals, titanium, titanium alloys, aluminium, nickel or titanium-based superalloys, nickel-based alloys (e.g. Inconell and Hasteloy), soft titanium alloys (tensile strength 500 N/mm²) - Machining tasks: Removing oxide layers, removing annealing colours, derusting, deburring, cleaning, paint stripping, roughening - Filament material: Stainless steel wire (INOX) - Length, filament: 19mm - Ø fill material: 0.2mm - Ø shank: 6mm - RPM, opt., up to: 7800RPM - RPM, opt., from: 4800RPM - Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm. - Packaging: Industrial packaging - Advantages: Optimum adaptation to the contour of the workpieces thanks to high flexibility. Produces fine surfaces. Very good corrosion resistance. - RPM, max.: 12000RPM - Ø: 80 mm - Fill width: 10 mm - Filament length: 50 mm - Wire thickness: 0.2 mm - Material suitability INOX: very suitable - Brand: PFERD - Material: Stainless steel - Shank Ø: 6 mm - Material suitability lacquer: very suitablePlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!
-
PFERD PFERD round brush POS RBG 12512 ( 8000433126 ) Ø 125 mm wire thickness 0.5 mm
Scope of Delivery: - 1x PFERD round brush Ø 125 mm wire thickness 0.5 mm Product Description: In order to fulfil the special requirements for processing stainless steel (INOX), PFERD uses wire grade 1.4310 (V2A) for all INOX brushes. Practical experience from the industrial environment confirms that it has very good corrosion resistance with an optimum service life. All PFERD brushes with INOX filaments are labelled blue and are suitable for use on all stainless steels (INOX) - such as V4A. Wire grade 1.4310 tends to exhibit ferromagnetic behaviour when work hardened, i.e. it is attracted by magnets, due to a change in the microstructure caused by deformation, e.g. during wire drawing. This has no influence on the quality and corrosion resistance of the INOX trim. It retains its corrosion-resistant properties. Stainless steel wire (INOX) can withstand temperatures of up to 450 °C. Aggressive brush. Suitable for heavy-duty brushing work in metal construction such as descaling - derusting - deburring - cleaning weld seams and removing adhesive residue and weld spatter. Technical Data: - Drive type: Straight grinder, angle grinder, flexible shaft drive - Application recommendation: Please observe the recommended speeds. For optimum results, use on powerful angle grinders. - Number of teeth: 24 pieces - Mounting system: Bore - Machinable materials: Nickel or titanium-based superalloys, titanium, stainless steel (INOX), soft titanium alloys (tensile strength 500 N/mm²), other non-ferrous metals, titanium alloys, nickel-based alloys (e.g. Inconell and Hasteloy), high-temperature materials, hard non-ferrous metals, cobalt-based alloys, bronze, aluminium - Machining tasks: Deburring, fillet weld processing, weld seam processing, root seam processing, paint stripping, removing oxide layers, removing tarnish, descaling, derusting, cleaning - Filament material: Stainless steel wire (INOX) - Length, filament: 28mm - Ø fill material: 0.5mm - Ø bore: 22.2mm - RPM, opt., up to: 12500RPM - RPM, opt., from: 4400RPM - Packaging: POS packaging - Advantages: Very good corrosion resistance. The brush is degreased and leaves no oil residue on the workpiece. Aggressive brushing effect due to high rigidity of the wire tufts. - RPM, max.: 12500RPM - Ø: 125 mm - Filament width: 12 mm - Wire thickness: 0.5 mm - Material suitability INOX: very suitable - Material suitability aluminium: very suitable - Brand: PFERD - Material: Stainless steel - Material suitability lacquer: very suitableFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"