Only this week: 10% off all BOSCH power tools - discount will be deducted in the shopping cart

Description

SKU: 138732
EAN: 4007220579107

Scope of Delivery:
- 1x PFERD cup brush Ø 50 mm wire thickness 0.3 mm

Product Description:
can be used universally for cleaning, derusting and smoothing as well as removing corrosion and paint - for brushing work on large, flat and easily accessible surfaces - INOX trim blue for use on all stainless steels (INOX), such as V4A. Stainless steel wire (INOX) withstands temperatures up to 450 °C. Cup brush with plastic-coated brush body. Shaft Ø 6 mm

Technical Data:
- Drive type: Flexible shaft drive, straight grinder, drill
- Application recommendation: For best performance, use a tool drive with at least 300 watts. Please observe the recommended speeds.
- Mounting system: Shank
- Machinable materials: Other non-ferrous metals, soft titanium alloys (tensile strength 500 N/mm²), titanium alloys, titanium, nickel-based alloys (e.g. Inconell and Hasteloy), stainless steel (INOX), nickel or titanium-based superalloys, high-temperature materials, hard non-ferrous metal, cobalt-based alloys, aluminium, bronze
- Machining tasks: Rust removal, tarnish removal, oxide layer removal, paint stripping, roughening, cleaning, deburring
- Filament material: Stainless steel wire (INOX)
- Width: 10mm
- Length, trim: 20mm
- Length, total: 75mm
- Ø outside: 50mm
- Ø trim material: 0.3mm
- Ø shaft: 6mm
- RPM, opt., up to: 6800RPM
- RPM, opt., from: 4200RPM
- Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm.
- Advantages: Produces fine surfaces. Very good corrosion resistance. Optimum adaptation to the contour of the workpieces thanks to high flexibility. Low risk of contamination of the workpiece.
- RPM, max.: 10500RPM
- Ø: 50 mm
- Wire thickness: 0.3 mm
- Material suitability INOX: very suitable
- Brand: PFERD
- Material: Stainless steel
- Material suitability lacquer: very suitablePlease observe the building regulations for commercial use!

For commercial use, please observe the building regulations!

Read more

Product form

PFERD cup brush TBU INOX ( 8000435473 ) Ø 50 mm wire thickness 0.3 mm

  • Vendor PFERD
  • condition  New
  • Unzufrieden? 100 Tage kostenfreie Retoure

    Information on importing to Switzerland! 🇨🇭🇱🇮 We take care of customs clearance. You will receive your package as normal within the delivery time and you don't have to worry about anything. Your invoice includes Swiss VAT. Placing an order with us feels like a normal domestic order for you. The same goes for returns!

    CHF 17.92
    incl. VAT, plus shipping

    As a member you will receive [points_amount]

    in stock delivery expected in  Wed, 09/17/2025

      • American Express
      • Apple Pay
      • Google Pay
      • PayPal
      • Visa
      • Klarna
      • Mastercard

      Smarte Produktberatung

       
      • Responsible Person for the EU (GPSR) EU-based economic operator that ensures the product complies with the necessary regulations.
        • August Rüggeberg GmbH&Co. KG Pferd - Werkzeuge
        • Hauptstr. 13
        • 51709 Marienheide
        • Germany
        • +49226490
        • info@pferd.com

      Description

      SKU: 138732
      EAN: 4007220579107

      Scope of Delivery:
      - 1x PFERD cup brush Ø 50 mm wire thickness 0.3 mm

      Product Description:
      can be used universally for cleaning, derusting and smoothing as well as removing corrosion and paint - for brushing work on large, flat and easily accessible surfaces - INOX trim blue for use on all stainless steels (INOX), such as V4A. Stainless steel wire (INOX) withstands temperatures up to 450 °C. Cup brush with plastic-coated brush body. Shaft Ø 6 mm

      Technical Data:
      - Drive type: Flexible shaft drive, straight grinder, drill
      - Application recommendation: For best performance, use a tool drive with at least 300 watts. Please observe the recommended speeds.
      - Mounting system: Shank
      - Machinable materials: Other non-ferrous metals, soft titanium alloys (tensile strength 500 N/mm²), titanium alloys, titanium, nickel-based alloys (e.g. Inconell and Hasteloy), stainless steel (INOX), nickel or titanium-based superalloys, high-temperature materials, hard non-ferrous metal, cobalt-based alloys, aluminium, bronze
      - Machining tasks: Rust removal, tarnish removal, oxide layer removal, paint stripping, roughening, cleaning, deburring
      - Filament material: Stainless steel wire (INOX)
      - Width: 10mm
      - Length, trim: 20mm
      - Length, total: 75mm
      - Ø outside: 50mm
      - Ø trim material: 0.3mm
      - Ø shaft: 6mm
      - RPM, opt., up to: 6800RPM
      - RPM, opt., from: 4200RPM
      - Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm.
      - Advantages: Produces fine surfaces. Very good corrosion resistance. Optimum adaptation to the contour of the workpieces thanks to high flexibility. Low risk of contamination of the workpiece.
      - RPM, max.: 10500RPM
      - Ø: 50 mm
      - Wire thickness: 0.3 mm
      - Material suitability INOX: very suitable
      - Brand: PFERD
      - Material: Stainless steel
      - Material suitability lacquer: very suitablePlease observe the building regulations for commercial use!

      For commercial use, please observe the building regulations!

      Read more

      Customer Reviews

      Be the first to write a review
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)

      Recently Viewed

      Top questions at a glance

      How can I pay for my order?

      We offer a wide range of secure payment methods:

      online payment methods

      PayPal, KLARNA, Google Pay, Apple Pay and Shop Pay.

      Credit cards

      You can also pay with the major credit cards VISA, MasterCard and American Express. In this case, the payment is secured using the 3D-Secure method. If we have any reason to suspect fraudulent ordering, we will automatically cancel the payment.

      How can I pay for my order?
      How do I receive an invoice?

      You will automatically receive the invoice from our shipping partner in a separate email after receipt of payment. It will not come with the confirmation of receipt. In addition, a paper invoice will be enclosed with the order.

      Therefore, please also check your spam folder again thoroughly and otherwise get in touch here in our invoice portal.

      How do I receive an invoice?
      Returns: I want to return something

      If you wish to return all or part of your order and you're from the EU 🇪🇺, please check our returns portal.

      For returns from Switzerland 🇨🇭 and Liechtenstein 🇱🇮, use this returns portal.

      Where is my order?

      There are various ways to track the shipment status:

      The dispatch usually takes 1 - 2 working days. If it takes longer or you think the parcel has disappeared, please contact us here in our problem portal.

      Your tool family

      • <strong>Personalized support</strong>

        Personalized support

        Unlike many other platforms, we offer you personal advice and service that supports you at all times.

      • <strong></strong>

      • <strong>Best Prices</strong>

        Best Prices

        For each item with this symbol, you will currently receive the best online price (for the german market) from us. You can find the exact information on this on the product pages.

      This is Toolbrothers

      Tools are the engine of our society. Whether you're building a house, bought an IKEA cabinet or finally want to fix that leaky faucet, you need tools. We provide you with tools – and in true Toolbrothers style.
      • Super fast
      • Reliable
      • With the best service

      Log in

      Forgot your password?

      Don't have an account yet?
      Create account