Best sellers for the week
-
NORRES NORRES suction and blower hose CP PTFE_HYP-INOX 472 178-180 mm 192.00 mm ( 4501403700 )
Sun, 09/28/2025
Scope of Delivery: - 1x NORRES suction and blower hose CP PTFE_HYP-INOX 472 178-180 mm 192.00 mm Product Description: Clamp profile hose, double-layered (up to +170°C) Applications: - flexible hose for hot and cold gases and for dusts, powders, fibres - chemical industry: chemical vapours, vapour recovery hose on loading arm, paint vapours, paint mist extraction Features: abrasion protection due to outer clamping profile - tensile clamping of the wall in the clamping profile - highly flexible + compressible 4:1 - very good heat resistance - anti-adhesive - good alkali and acid resistance - extremely good chemical resistance - RoHS compliant Temperature range: -40°C to 170°C Technical Data: - Bending radius: 44.00mm - Weight: 1.42kg/m - Physical state: GaseousFor commercial use, please observe the building regulations!
CHF 565.66
-
HERMETA Hermeta hook 0148 ( 3000283356 ) single Projection 86.5 mm Height 135 mm
Sun, 09/28/2025
Scope of Delivery: - 1x HERMETA single hook projection 86.5 mm Product Description: Single hook - Anodised aluminium profile - 2 fixing holes Technical Data: - Supplement: 2 fixing holes - Surface: black plastic-coated - Projection: 86.5 mm - Height: 135 mm - Design: single - Material: aluminium - Brand: HERMETAFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 11.58
-
NORRES NORRES PROTAPE(R) PUR 301 AS suction and blower hose inner Ø 125-127 mm ( 4501400778 )
Sun, 09/28/2025
Scope of Delivery: - PROTAPE® PUR 301 AS suction and blower hose Inner Ø 125-127 mm Product Description: Applications: flexible hose for gases, abrasive dusts, powders, fibres, extraction, dedusting and filter systems, oil mist, paint vapour and chemical vapour extraction, extraction arm, gas pendulum hose on loading arm, potentially explosive areas, animal stable ventilation, bus, caravan, ship, yacht: Ventilation, heating, clean room ventilation, semiconductor manufacturing machine, bellows, expansion joint Properties: super lightweight design, highly flexible + compressible 3:1, abrasion-resistant, microbe-resistant, good resistance to oil, petrol and chemicals, very good flexibility at low temperatures, flame retardant acc: DIN 4102-B1, flame retardant acc: UL94-HB, wall permanently antistatic: contact resistance and surface resistance Construction: 1. spring steel wire embedded in the wall, 2. wall: permanently antistatic premium ester polyurethane (Pre-PUR ® ), 3. wall thickness approx. 0.4 mm Temperature range: -40 °C to 90 °C (briefly up to 125 °C) Delivery variants: other versions, dimensions and lengths available on request Technical Data: - Bending radius: 71.00mm - Physical state: Gaseous - OverpressureDIN 26057(50% elongation)(bar): 0.195 (0.57) - Negative pressureDIN 26057(axially fixed)(bar): 0.045 (0.19)For commercial use, please observe the building regulations!
CHF 125.14
-
AMF AMF square socket spanner DIN 904 L size 9 mm length 200 mm ( 4000824857 )
Sun, 09/28/2025
Scope of Delivery: - Square socket spanner DIN 904 L size 9 mm length 200 mm Product Description: Made of special steel - Press-fitted pivot pin - Shank and pivot pin hardened and tempered in a burnished colour - Fitted pivot pin Technical Data: - Weight: 390gFor commercial use, please observe the building regulations!
CHF 45.34
-
PFERD PFERD cup wheel ETT SG STEELOX 110/55 mm ( 4000843243 )
Sun, 09/28/2025
Scope of Delivery: - Cup wheel ETT SG STEELOX 110/55 mm Product Description: high grinding efficiency and good service life - for weld seam processing, chamfering, deburring, surface grinding - dimensions 110 x 55 mm - bore 22.23 mm Ø Technical Data: - max. speed: 8600min-¹For commercial use, please observe the building regulations!
CHF 24.28
-
PFERD PFERD flap disc Ø50xH30mm grit 40 ( 8000429727 )
Sun, 09/28/2025
Scope of Delivery: - Flap sander Ø50xH30mm grit 40 Product Description: aluminium oxide A - with flaps made of abrasive on backing - for universal use from coarse to fine sanding - shaft Ø 6 mm - also suitable for processing brass, copper and zinc Technical Data: - Shank Ø: 6mm - Drive type: Straight grinder, flexible shaft drive - Application recommendation: Reducing the contact pressure and peripheral speed and adding grinding oil reduces tool wear and the temperature load on the workpiece. Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. For best performance, use at a recommended cutting speed of 15-20 m/s. This achieves an ideal compromise between stock removal rate, surface finish, temperature load on the workpiece and tool wear. Increasing the cutting speed results in a slightly finer surface finish. Increasing the contact pressure results in a slightly coarser surface. The softer the material to be machined, the coarser the surface (when using , An increase in the stock removal rate should be achieved by using a coarser grit size and not by increasing the contact pressure in order to prevent unnecessary tool wear and thermal stress on the workpiece. - Machinable materials: Copper, hardened, tempered steels over 1,200 N/mm² ( 54 HRC - Machining tasks: Gradual fine grinding, deburring, levelling, structuring (matting, line matting and satin finishing), surface processing, weld seam processing - Width: 30mm - Note: PFERDERGONOMICS recommends flap discs in order to sustainably reduce the vibration and noise generated during use and to improve working comfort. - Length, shaft: 40mm - RPM, opt.: 7000RPM - Safety instructions: For safety reasons, the specified maximum permissible speed must never be exceeded. The contact pressure must be significantly reduced if the specified optimum speed is exceeded. Safety is only guaranteed if the clamping length is at least 15 mm and the specified maximum speed is not exceeded with open shank lengths. - Advantages: Consistently high material removal over the entire service life, as new, aggressive abrasive is constantly released. Optimum contour adaptation due to high flexibility. Can be used very close to edges and at angles thanks to the flat casting core design.For commercial use, please observe the building regulations!
CHF 11.06
-
LOCKWEILER LOCKWEILER transparent magazine H164xW600xD134mm ( 9000449645 )
Sun, 09/28/2025
Scope of Delivery: - Transparent magazine H164xW600xD134mm Product Description: Transparent plastic container in white housing made of impact-resistant polystyrene - Containers can be swivelled forwards for removal and can be taken out - Housing width 600 mm - Stackable and suitable for wall mounting Technical Data: - Material: PlasticFor commercial use, please observe the building regulations!
CHF 35.01
-
A.BINZEL A.BINZEL Keramische Gasdüse Standard ( 1204740484 )
Sun, 09/28/2025
Lieferumfang:1x A.BINZEL Keramische Gasdüse StandardProduktbeschreibung: für ABITIG GRIP 9 / ABITIG GRIP 20
CHF 13.26
-
KÄFER KÄFER thickness gauge K 50/3 A 0-30 mm reading 0.1 mm ( 4131406005 )
Sun, 09/28/2025
Scope of Delivery: - Thickness gauge K 50/3 A 0-30 mm reading 0.1 mm Product Description: for measuring the thickness of leather, felt, rubber, glass, sheet metal, plywood and plastics of all kinds - the line scale of the dial gauge can be set to zero by turning the knurled outer ring - bracket depth 50 mm, outer ring Ø 58 mm Technical Data: - Model: K 50/3 A - Ironing depth: 50mm - subject to inspection: yesFor commercial use, please observe the building regulations!
CHF 140.92
-
GAH GAH angle connector 40 x 40x20mm ( 3000200330 )
Sun, 09/28/2025
Scope of Delivery: - Angle connector 40 x 40x20mm Product Description: Material: Raw steel - Surface: Sendzimir galvanised - Angle 90 ° Technical Data: - Surface: sendzimir galvanised - Dimension c: 20mm - Dimension a: 40mm - Dimension b: 40mmFor commercial use, please observe the building regulations!
CHF 28.67
-
ELEMENT SYSTEM Element System furniture leg white ( 3000200900 ) 25 x 25 mm height 100 mm
Sun, 09/28/2025
Scope of Delivery: - 1x ELEMENT SYSTEM furniture leg 25 x 25 mm height 100 mm Product Description: made of square steel tube 25 x 25 mm - screw-on plate 60 x 60 mm - with M10 thread - load capacity per foot 50 kg Technical Data: - Material: steel - Surface: white - Ø: 25 x 25 mm - Height: 100 mm - Design: angular - Thread: M10 - Mounting type: screw-on plate - Load capacity: 50 kg - Brand: ELEMENT SYSTEMPlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!
CHF 14.24
-
DURABLE DURABLE Dokumententasche B210xH297 mm DIN A4 hoch ( 9000451006 )
Sun, 09/28/2025
Lieferumfang: 1xDURABLE Dokumententasche B210xH297 mm DIN A4 hoch Lieferung ohne Inhalt bzw. Zubehör Produktbeschreibung: magnetisch · starke Haftkraft durch 2 eingeschweißte Neodym-Magnete · auch geeignet für den Außeneinsatz durch Staub- und Regenschutzklappe · Anwendung an metallischen Oberflächen wie Rohren, Gitterboxen und beweglichen Transportbehältern · ideal für Oberflächen mit wenig Haftfläche · Vorderseite transparent · VE = 10 Stück Lieferung ohne Inhalt bzw. Zubehör
CHF 69.71
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"