Show previous products

• 

  HELLER HELLER hammer drill Trijet Ø 16 mm working l.400 mm l.450 mm ( 8000656707 )

  Thu, 12/11/2025

  Scope of Delivery: - 1x HELLER hammer drill Trijet Ø 16 mm working length 400 mm length 450 mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 51.80

• 

  HAZET HAZET socket 900 1/2 ″ hexagon ( 4000822697 )

  Thu, 12/11/2025

  Scope of Delivery: - Socket 900 1/2 ″ hexagon socket Product Description: 12.5 mm (1/2″) square drive - hexagonal - CV steel - knurled - chrome-plated, polished - DIN 3124 / ISO 2725-1 Technical Data: - Material: CV steelFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 21.22

• 

  Bosch BOSCH hammer drill Expert SDS-7X Ø 15.0 mm working l.200 mm l.265 mm ( 4000909961 )

  302 Reviews

  Thu, 12/11/2025

  Scope of Delivery: - Hammer drill Expert SDS-7X Ø 15.0 mm working l.200 mm l.265 mm Product Description: durable drilling of reinforced concrete - with Carbide Technology - penetrates effectively through the reinforcement - suitable for all SDS plus rotary hammers Technical Data: - nanFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 27.21

• 

  Wera WERA precision mechanics screwdriver set Kraftform Micro Big Pack 1 25-piece ( 4000829814 )

  Thu, 12/11/2025

  Scope of Delivery: - Precision mechanics screwdriver set Kraftform Micro Big Pack 1 25-piece set - Supplied in folding bag with surface-friendly outer material Product Description: with multi-component power mould micro handle - with roll-off protection - cap rotatable - round blades with Black Point tip - Take it easy Tool Finder System - Contents: 1 screwdriver each for slotted screws size 1.5 x 0.23 x 40 / 1.8 x 0.3 x 60 / 2.5 x 0.35 x 40 / 2.0 x 0.4 x 60 / 3.0 x 0.5 x 80 mm 1 screwdriver each for screws with Phillips head (PH) size 000 ¹ x 40 / 00 ¹ x 40 / 0 ²) x 40 mm 000 ¹) x 40 / 00 ¹) x 40 / 0 ²) x 40 mm each 1 screwdriver for screws with internal TORX® profile T 5 x 40 / 5 x 40* / 6 x 40 / 6 x 40* / 7 x 60* / 8 x 60* / 10 x 60 mm* 1 screwdriver for screws with TORX PLUS profile® Gr. 1 x 40 mm 1 screwdriver each for screws with hexagon socket profile 0.9 x 40 / 1.3 x 40 / 1.5 x 60 / 2 x 60 mm 1 screwdriver each for screws with external hexagon profile 4.0 x 60 / 5.5 x 60 mm 1 screwdriver for Microstix® screws s. m x 40 mm 1 component extractor 3.5 x 50 mm * = with holding function for the screw ¹) PH 000 + PH 00 Blade turned down to nominal size on the drive side over a length of 10 mm ²) PH 0 modified in accordance with JCIS 0 (Japanese Camera Industrial Standard) Technical Data: - nanFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 110.47

• 

  PFERD PFERD mounted point STEEL EDGE D40xH40mm 6 mm ( 4143100048 )

  Thu, 12/11/2025

  Scope of Delivery: - Mounted point STEEL EDGE D40xH40mm 6 mm Product Description: Suitable for use on edges and for deburring work on steel and cast steel components, as well as for grinding chamfers and grinding contours Technical Data: - nanFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 26.50

• 

  HETTICH HETTICH ball bearing slide KA 5632 galvanised steel ( 3000270152 )

  Thu, 12/11/2025

  Scope of Delivery: - Ball bearing slide KA 5632 galvanised steel Product Description: Ball bearing slide KA 5632, 12.7 mm installation width, 400 mm Technical Data: - nanFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 22.77

• 

  LESSMANN LESSMANN round brush Ø 250 mm wire thickness 0.35 mm ( 4000840769 )

  Thu, 12/11/2025

  Scope of Delivery: - Round brush Ø 250 mm wire thickness 0.35 mm Product Description: crimped wire - high wire quality (high-strength wire) - for all standard table deburring machines - very high concentricity and particularly long service life Technical Data: - nanFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 212.65

• 

  KNIPEX KNIPEX pipe cutter for pipes Ø 6-35 mm ( 4000794731 )

  Thu, 12/11/2025

  Scope of Delivery: - Pipe cutter for pipes Ø 6-35 mm Product Description: for plastic pipes - for burr-free cutting of pipes (e.g. plastic armoured pipes) with Ø 6 - 35 mm - not suitable for cutting cables - low force required - housing: die-cast aluminium, painted red - blade: special tool steel, oil-hardened, replaceable Technical Data: - Spring: with opening spring - Material: Die-cast aluminiumFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 54.59

• 

  AMF AMF vertical clamp no. 6800 size 3 ( 4000833503 )

  Thu, 12/11/2025

  Scope of Delivery: - Vertical clamp no. 6800 size 3 Product Description: with horizontal base Technical Data: - C: 20mm - D: 7.5mm - a: 105° - L2: 112mm - HW min.: 2mm - L1: 112mm - F1: 1.2kN - L: -mm - a*: 60° - F: 19mm - P: 35mm - K: 7.5mm - A: 8mm - HW max: 11mm - H1: 186mm - M1: - - Bore Ø: 7.5mm - I: 18mm - F2: 2.5kN - B: 79mm - E: 37mm - M: 32.5mm - H: 33mm - N: 46mm - Span: 37mmFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 36.40

• 

  Fiskars Fiskars double hoe QuikFit(TM) ( 4000722232 ) W53xL187mm

  Thu, 12/11/2025

  Scope of Delivery: - 1x FISKARS double hoe W53xL187mm Product Description: Tool head length 185 mm - steel head - black/orange - multifunctional hoe: 3 tines for loosening soil in kitchen gardens and flower beds - hoe side ideal for removing weeds - also suitable for hard-to-reach areas Technical Data: - Weight: 198g - Width: 53 mm - Length: 187 mm - Design: multifunctional - Brand: FISKARPlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 21.94

• 

  Sonstige Combination spanner 894 ( 4000823247 ) Width across flats 19 mm Length 170 mm

  Thu, 12/11/2025

  Scope of Delivery: - 1x open-end spanner 19 mm width across flats Length 170 mm Product Description: Surface black - jaw position 15 ° Technical Data: - Length: 170mm - Surface: black - Material: CV steel - jaw position: 15° - Width across flats: 19 mm - Standard: DIN 894, ISO 3318Please observe the building regulations for commercial use!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 8.18

• 

  KLINGSPOR KLINGSPOR abrasive mop wheel WSM 617 120 brown ( 4000843661 )

  Thu, 12/11/2025

  Scope of Delivery: - Sanding mop wheel WSM 617 120 brown Product Description: Aluminium oxide - for coarse and fine sanding - Ideal for fast processing of weld seams and removing paint layers - M14 holder Technical Data: - Mounting: M14For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 22.04

Show more products