All Tools
-
Ruko RUKO twist drill DIN 340 type N ( 4000601013 ) nominal Ø 12 mm straight shank 10xD right-hand cutting
Mon, 10/06/2025
Scope of Delivery: - 1x RUKO twist drill, nominal Ø 12 mm Product Description: HSS - DIN 340 - type N - point angle 118 ° - profile ground - taper ground - with straight shank - right-hand cutting - high-performance twist drill with increased concentricity in long version - suitable for deep drilling work in generally common materials - high break resistance - small feeds and more frequent chip evacuation are necessary for deep hole drilling Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.2 mm/rev - Quality: profile ground - Nominal Ø: 12 mm - Total length: 205 mm - Spiral length: 134 mm - Shank design: Cylindrical shank - Point angle: 118 ° - Type: N - Brand: RUKO - Standard: DIN 340 - Cutting material: HSS - Drilling depth: 10xDFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 36.49
-
LOCKWEILER Lockweiler plastic case ( 9000447885 ) L600xW400xH293 mm PP 2 handles
Mon, 10/06/2025
Scope of Delivery: - 1x LOCKWEILER plastic case L600xW400xH293 mm PP 2 handles Product Description: made of polypropylene - with 2 handles at the ends - with snap-in sliding closure - very sturdy - non-slip stackable - resistant to most acids and oils - temperature-resistant from -20 °C to +80 °C - colour grey Technical Data: - Features: 2 handles - Inner height: 275mm - Inner length: 553mm - Inner width: 353mm - Capacity: 55 litres - Outer length: 600 mm - Colour: grey - Outer height: 293 mm - Outer width: 400 mm - Design: Sliding closure - Material: PP - Brand: LOCKWEILERFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 63.40
-
Bosch BOSCH hammer drill Expert SDS-7X Ø 16.0 mm working l.200 mm l.265 mm ( 4000909964 )
Mon, 10/06/2025
Scope of Delivery: - Hammer drill Expert SDS-7X Ø 16.0 mm working l.200 mm l.265 mm Product Description: durable drilling of reinforced concrete - with Carbide Technology - penetrates effectively through the reinforcement - suitable for all SDS plus rotary hammers Technical Data: - nanFor commercial use, please observe the building regulations!
CHF 28.67
-
HEDI HEDI three-phase cable reel Generation 7 Champion ( 4000873500 ) 25 m H07RN-F 5 x 2.5 mm² solid plastic IP54
Mon, 10/06/2025
Scope of Delivery: - 1x HEDI three-phase cable reel 25 m H07RN-F 5 x 2.5 mm² Product Description: made of solid plastic - Ø 290 mm - CEE connection plug 5x16 A / 400 V - with phase inverter - outlets: 2x protective contact sockets 250 V, 1x splash-proof CEE socket outlet 5x16 A / 400 V, with thermal circuit breaker - for permanent use outdoors and on construction and assembly sites complies with the requirements of DGUV-I 203-006 (formerly BGI 608) and DGUV-I 203-005 (formerly BGI 600), K2 Technical Data: - subject to testing: yes - Cable length: 25 m - Cable cross-section: 5 x 2.5 mm² - Reel Ø: 290 mm - Plug type: F - Protection class: IP54 - Number of sockets: 2 protective contact sockets - Cable quality: H07RN-F - Material: solid plastic - Cable colour: black - Voltage: 400 V - Brand: HEDIf used commercially, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 221.09
-
NORRES NORRES AIRDUC(R) PUR 351 FOOD suction and delivery hose Inner Ø 44-45 mm Outer Ø 53.00 mm ( 4501402289 )
Mon, 10/06/2025
Scope of Delivery: - AIRDUC® PUR 351 FOOD suction and delivery hose Inner Ø 44-45 mm Outer Ø 53.00 mm Product Description: Applications: flexible hose for abrasive powder, bulk material, granulate, gases, conveying of dry and frozen foodstuffs and pharmaceuticals, vacuum and suction conveyors, dosing systems, mixers, dryers, packaging machines, big bag filling/emptying, mills, industrial and hoovers Properties: medium-weight design, highly abrasion-resistant, approval in accordance with EU Regulation 10/2011 and EC 1935/2004 and the latest EU Regulation 2015/174 by an independent testing institute for the entire hose, polyurethane food-safe in accordance with: FDA 21 CFR 177.2600 and 178.2010, odourless and tasteless, resistant to microbes and hydrolysis, good resistance to oil, petrol and chemicals, very good low-temperature flexibility, flame-retardant according to: UL94-HB, RoHS compliant, approval in accordance with EU Regulation 10/2011 (food simulants A, B, C or E and D2) and EC 1935/2004 - manufacturing process in accordance with GMP EC 2023/2006 Construction: 1. Spring steel wire firmly moulded into the wall, 2. Wall: special premium ether polyurethane (Pre-PUR ® ), 3. wall thickness approx. 1.0 mm Temperature range: -40 °C to +90 °C (short +125 °C) Delivery variants: other versions, dimensions and lengths available on request Technical Data: - Physical state: Solid / Gaseous - Operating pressure: 1,555bar - OverpressureDIN 26057(50% expansion)(bar): 1,555 (3,33) - Negative pressureDIN 26057(axially fixed)(bar): 0.315 (1.00)For commercial use, please observe the building regulations!
CHF 266.03
-
FISCH-TOOLS FISCH-TOOLS Forstner bit type 0317 Wave Cutter Ø 45 mm total length 90 mm ( 4000863483 )
Mon, 10/06/2025
Scope of Delivery: - Forstner bit type 0317 Wave Cutter Ø 45 mm total length 90 mm Product Description: DIN 7483G - with centre point - peripheral cutting edge with patented serrated edge - 2 cutting edges and shank with 3 surfaces - premium quality - forged design - Applications: For drilling tear-free, dimensionally accurate blind holes, for edge drilling and for drilling at an angle in soft and hard woods, the wavy peripheral cutting edge prevents the cutting edges from annealing, easy and low-force cutting thanks to optimised cutting geometries Technical Data: - nanFor commercial use, please observe the building regulations!
CHF 31.09
-
DOLEZYCH DOLEZYCH load-securing net DIN EN 12195-2 DoKEP 350 P Length 1.025 m Width 1.025 m ( 4000365460 )
Mon, 10/06/2025
Scope of Delivery: - Load securing net DIN EN 12195-2 DoKEP 350 P Length 1.025 m Width 1.025 m Product Description: manufactured load-securing net for cars and vans - with a mesh size of 175x75 mm suitable for a wide variety of loads, secures up to 500 kg load weight - with 4 quick-release clamps Technical Data: - LC attachment point: 350daN - Material: PET knotted - subject to testing: yesFor commercial use, please observe the building regulations!
CHF 53.26
-
EDDING EDDING Lackmarker 750 blau ( 9000487987 )
Mon, 10/06/2025
Lieferumfang:1x EDDING Lackmarker 750 blauProduktbeschreibung: zum Markieren und Schreiben auf nahezu allen Materialien, z. B. Holz, Glas, Kunststoff und Metall, besonders auch für dunkle und transparente Materialien· Farben gelb, weiß bis 1000 °C noch sichtbar · geruchsarme, permanente Pigmenttinte · ventilgesteuerter Tintenfluss · lackartig und voll deckend · wasserfest, wetterfest · schnelltrocknend · hohe Wischbeständigkeit · hohe Licht- und Hitzebeständigkeit
CHF 36.99
-
SSF SSF Angled striking plate ( 3000251048 ) Aluminium silver Angle depth 8 mm DIN left / right
Mon, 10/06/2025
Scope of Delivery: - 1x SSF angle striking plate aluminium silver angle Product Description: Angle - with plastic backing - unequal-legged - for room doors 20 x 8 x 170 mm Technical Data: - Hinge direction: DIN left / right - Material: aluminium - Surface: silver - Forend: round - Width: 20 mm - Depth: 8 mm - Design: Angle - Brand: SSFFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 8.00
-
TYROLIT TYROLIT sanding file 9011 Length 100 mm Width 10 mm ( 4000845108 )
Mon, 10/06/2025
Scope of Delivery: - Sanding file 9011 Length 100 mm Width 10 mm Product Description: for efficient machining of tools in the woodworking and machine industry - files made of silicon carbide are mainly used for carbide or carbide-tipped tools Technical Data: - nanFor commercial use, please observe the building regulations!
CHF 9.29
-
HOJU-Beschlag GmbH LM multi-skin sheet 3070 ( 3000281602 ) Length 500 mm Width 100 mm Thickness 1.5 mm
Mon, 10/06/2025
Scope of Delivery: - 1x LM web plate length 500 mm width 100 mm Product Description: Thickness 1.5 mm - Slots 30x5 mm - Web height 15 mm - Cut-out length: 20 mm - Cut-out width: 15 mm - Aluminium Technical Data: - Material: Aluminium - Length: 500 mm - Width: 100 mm - Surface: natural colour F1 - Edge width: 16 mm - Slots: 30x5 mm - Thickness: 1.5 mm - Perforation: Slots 30x5 mm - Model: 3070 - Web height: 15 mmmFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 18.47
-
HEYTEC HEYTEC socket 508100-6 3/4 ″ hexagon ( 4000824466 )
Mon, 10/06/2025
Scope of Delivery: - Socket spanner bit 508100-6 3/4 ″ hexagon Product Description: 20.0 mm (3/4 ″) square drive - hexagonal - CV steel - chrome-plated - DIN 3124 / ISO 2725-1 Technical Data: - Material: chrome vanadium steelFor commercial use, please observe the building regulations!
CHF 21.88
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"