Only this week: 10% off all BOSCH power tools - discount will be deducted in the shopping cart

All Tools

25001 products

  • STEINEL GluePRO 300 KF hot glue gun Glue output 25 g/min ( 4000892750 )

    Steinel STEINEL GluePRO 300 KF hot glue gun Glue output 25 g/min ( 4000892750 )

    Wed, 10/08/2025

    Scope of Delivery: - GluePRO 300 KF hot glue gun Glue output 25 g/min - Removable stand, integrated hanging option, plastic case Product Description: Ergonomic handling · 50% less effort · Precise, electronic temperature control · Regulated tube heating guarantees fast heating and constant temperature · Patented parallel feed for low wear · Individually selectable stroke setting · Restart protection · Replaceable nozzles · Adhesive line of up to 500 mm with one stroke Technical Data: - Weight: 0.58 kg - Mains voltage: 220-230 V / 50-60 Hz - Accuracy: ± 3°C - Nominal power consumption: 300 W - Subject to testing: yesFor commercial use, please observe the building regulations!

    1 - 2 business days

    CHF 149.89

  • Simpson Strong TIE support foot PILG ( 3000257527 ) 90 x 60 x 110 mm hole Ø 8.5 mm 500 mm

    SIMPSON STRONG TIE Simpson Strong TIE support foot PILG ( 3000257527 ) 90 x 60 x 110 mm hole Ø 8.5 mm 500 mm

    Wed, 10/08/2025

    Scope of Delivery: - 1x SIMPSON STRONG TIE support leg 90 x 60 x 110 mm Product Description: for fastening wooden supports and posts in foundations - can also be used where gravel layers and base plates require greater spacing - bar length: 500 mm - tube Ø 38 mm - hole sizes: Ø 8.5 mm - steel batch galvanised 55 µm - type IL - for setting in concrete Technical Data: - Surface: piece galvanised - Model: PILG - Type: IL - Design: for setting in concrete - Material: steel - Plate size: 90 x 60 x 110 mm - Bar: 110 x 70 x 8.0 mm - Approval: ETA 07/0285 - Hole Ø: 8.5 mm - Mounting type: for setting in concrete - Tube Ø: 38 mm - Bar length: 500 mm - Brand: SIMPSON STRONG TIEFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

    1 - 2 business days

    CHF 44.22

  • Fine adhesive sanding sheet set ( 8000381313 ) perforated grit 60, 80, 120, 180, 240

    FEIN Fine adhesive sanding sheet set ( 8000381313 ) perforated grit 60, 80, 120, 180, 240

    Wed, 10/08/2025

    Scope of Delivery: - 1x FEIN adhesive sanding sheet set perforated grit 60, 80, 120, 180, 240 - 10 sanding sheets each grit 60, 80, 120, 180, 240 Product Description: Aluminium oxide abrasive grains and fully synthetic resin bond guarantee high removal rate, low clogging and long service life - Universal use on almost all materials - Quick Velcro fastening - Edge length 80 mm Technical Data: - Grit size: 60, 80, 120, 180, 240 - Design: perforated - Brand: FEINFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

    1 - 2 business days

    CHF 25.69

  • GAH throw hanger length 400 x 101 mm width 63 x 45 mm ( 8001514127 )

    GAH GAH throw hanger length 400 x 101 mm width 63 x 45 mm ( 8001514127 )

    Wed, 10/08/2025

    Scope of Delivery: - 1x GAH throw hanger length 400 x 101 mm width 63 x 45 mm Product Description: with riveted pin - material: raw steel, surface: galvanised, thick-film passivated Technical Data: - Surface: galvanised, thick-film passivated - Dimension c: 63mm - Dimension d: 45mm - Dimension a: 400mm - Dimension b: 101mmFor commercial use, please observe the building regulations!

    1 - 2 business days

    CHF 12.59

  • PICA Permanentmarker Classic schwarz ( 4000871372 )

    PICA PICA Permanentmarker Classic schwarz ( 4000871372 )

    Wed, 10/08/2025

    Lieferumfang:1x PICA Permanentmarker Classic schwarzProduktbeschreibung: für permanente Markierungen auf nahezu allen Oberflächen · schnell trocknend · wasser-/abriebfest · Dry-Safe-Tinte

    1 - 2 business days

    CHF 16.19

  • MAX4CAR measuring jug 1 l ( 4000356906 )

    MAX4CAR MAX4CAR measuring jug 1 l ( 4000356906 )

    Wed, 10/08/2025

    Scope of Delivery: - 1x MAX4CAR measuring jug 1 litre Product Description: PP - transparent - with 2 graduations (blue + neutral) - temperature-resistant -10˚C to +120˚C - with open, stackable handle - permanent, embossed scale - additional blue printed scale for transparent liquids - large pouring spout - unbreakable, sturdy design - resistant to fuel, oil and acids Technical Data: - Colour: transparentFor commercial use, please observe the building regulations!

    1 - 2 business days

    CHF 10.39

  • ELKA RAINWEAR softshell jacket Working Xtreme size M ( 4000380635 )

    ELKA RAINWEAR ELKA RAINWEAR softshell jacket Working Xtreme size M ( 4000380635 )

    Wed, 10/08/2025

    Scope of Delivery: - 1x ELKA RAINWEAR softshell jacket Working Xtreme size M Product Description: 100 % polyester, twill, 320 g/m² - windproof - water-repellent and breathable - water column > 8.000 mm - detachable sleeves - 2-way YKK zip - chest pocket with flap and concealed ID card pocket - vertical chest pocket with zip - 2 pockets with zip - detachable hood with cord and Velcro adjustment - extra long at the back - adjustable sleeves with Velcro fastening and hand protection - adjustable waistband - segmented LOXY® reflective strips available in sizes on request: XS-5XL also available in green/black and red/black Technical Data: - Fabric weight approx.: 320g/m²For commercial use, please observe the building regulations!

    1 - 2 business days

    CHF 59.25

  • NOW glazing block ( 3000500013 ) width 24 mm plastic

    NOW NOW glazing block ( 3000500013 ) width 24 mm plastic

    Wed, 10/08/2025

    Scope of Delivery: - 1x NOW glazing block width 24 mm Product Description: Case set with glazing blocks in 1, 2, 3, 4, 5 and 6 mm - made of plastic - assorted colours Contents: 100 pieces per thickness Technical Data: - Material: Plastic - Content: 600 szt. - Width: 24 mm - Length: 100 mm - Brand: NOWFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

    1 - 2 business days

    CHF 40.87

  • GAH throw hanger length 500 x 101 mm width 63 x 45 mm ( 8001737581 )

    GAH GAH throw hanger length 500 x 101 mm width 63 x 45 mm ( 8001737581 )

    Wed, 10/08/2025

    Scope of Delivery: - 1x GAH throw hanger length 500 x 101 mm width 63 x 45 mm Product Description: with riveted pin - material: raw steel, surface: galvanised, thick-film passivated Technical Data: - Surface: galvanised, thick-film passivated - Dimension c: 63mm - Dimension d: 45mm - Dimension a: 500mm - Dimension b: 101mmFor commercial use, please observe the building regulations!

    1 - 2 business days

    CHF 14.48

  • LA-KA-PE open-fronted storage box LK L85/65xW105xH45mm ( 9000449060 )

    LA-KA-PE LA-KA-PE open-fronted storage box LK L85/65xW105xH45mm ( 9000449060 )

    Wed, 10/08/2025

    Scope of Delivery: - Open fronted storage box LK L85/65xW105xH45mm Product Description: made of high-impact polystyrene - stackable - highly stable - in the colours red, green and blue - different sizes for individual requirements - size 1A with reinforcement bar Technical Data: - Length: 85/65mmFor commercial use, please observe the building regulations!

    1 - 2 business days

    CHF 36.98

  • Combination spanner 894 ( 4000823256 ) Width across flats 9 mm Length 100 mm

    Sonstige Combination spanner 894 ( 4000823256 ) Width across flats 9 mm Length 100 mm

    Wed, 10/08/2025

    Scope of Delivery: - 1x open-end spanner width across flats 9 mm length 100 mm Product Description: Surface black - jaw position 15 ° Technical Data: - Length: 100mm - Surface: black - Material: CV steel - jaw position: 15° - Width across flats: 9 mm - Standard: DIN 894, ISO 3318Please observe the building regulations for commercial use!For commercial use, please observe the building regulations!

    1 - 2 business days

    CHF 7.69

  • Abicor Binzel clamping sleeve ( 1204740461 ) Ø 3.2 mm suitable for ABITIG GRIP 9/20

    A.BINZEL Abicor Binzel clamping sleeve ( 1204740461 ) Ø 3.2 mm suitable for ABITIG GRIP 9/20

    Wed, 10/08/2025

    Scope of Delivery: - 1x A.BINZEL clamping sleeve Ø 3.2 mm Product Description: for ABITIG GRIP 9 / ABITIG GRIP 20 - Length: 25 mm Technical Data: - Version: Standard - Ø: 3.2 mm - Length: 25 mm - suitable for: ABITIG GRIP 9/20 - Brand: A.BINZELFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

    1 - 2 business days

    CHF 13.27


I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"

Log in

Forgot your password?

Don't have an account yet?
Create account