All Tools
-
Bosch BOSCH Reciprocating saw blade S 1130 CF Length 225 mm Width 22 mm ( 8000343789 )
Thu, 10/09/2025
Scope of Delivery: - Reciprocating saw blade S 1130 CF Length 225 mm Width 22 mm Product Description: Reciprocating saw blade S 1130 CF. Endurance for Heavy Metal. Material: BIM. Micro-Edge Geometry - patented 2x2 Tooth Geometry. Areas of application: For thick sheet metal (from 4 to 12 mm thick) - for thick-walled - solid pipes and profiles (less than 175 mm thick). Ideal for pipe cutting equipment and for rescue/demolition work. Powerful - coarse cut. Contents of sales packaging: 25 pieces. Technical Data: - nanFor commercial use, please observe the building regulations!
CHF 139.26
-
HOPPE HOPPE square spindle Profile spindle square 8 x 120 mm ( 3311003014 )
Thu, 10/09/2025
Scope of Delivery: - Square spindle Profile spindle Square 8 x 120 mm Product Description: Iron - galvanised - split design Attention: 1 pin consists of 2 individual parts (1 piece = 2 parts)! Technical Data: - Surface: galvanised - Version: 2-pieceFor commercial use, please observe the building regulations!
CHF 8.76
-
ORIGINAL LÖWE ORIGINAL LÖWE mitre shears LÖWE 3.101 Length 215 mm Blade length 50 mm ( 4000814570 )
Thu, 10/09/2025
Scope of Delivery: - Mitre shears LÖWE 3.101 Length 215 mm Blade length 50 mm Product Description: high-gloss chrome-plated - two vertical stops for 45° - cutting thickness max. 15 mm - blade corrosion-protected and non-stick coated - extremely robust Technical Data: - Areas of application: for mitre cuts in tile edging strips, wooden and decorative strips - Surface: high-gloss chrome-plated - Handle type: without plastic handles - Cutting thickness: max. 15 mmFor commercial use, please observe the building regulations!
CHF 39.99
-
KANCA Kanca pipe clamping jaw ( 4000830507 ) for jaw width 120 mm
Thu, 10/09/2025
Scope of Delivery: - 1x KANCA pipe clamping jaw for jaw width 120 mm Product Description: swivelling and interchangeable - forged and hardened (HRC 48-50) - enables fixed 3-point clamping of pipes Technical Data: - for jaw width: 120 mm - Brand: KANCAFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 35.35
-
VORMANN VORMANN Scharnier Höhe 100 mm Breite 145 mm ( 3000272166 )
Thu, 10/09/2025
Lieferumfang:1x VORMANN Scharnier Höhe 100 mm Breite 145 mmProduktbeschreibung: Stahl · blau verzinkt · mit vernietetem Messingstift · nach DIN 7954 D
CHF 44.68
-
HELIT HELIT Papierkorb 15 l H280xØ267 mm mit Lochdekor ( 9000468161 )
Thu, 10/09/2025
Lieferumfang:1x HELIT Papierkorb 15 l H280xØ267 mm mit LochdekorProduktbeschreibung: mit Lochdekor · aus pulverbeschichtetem Stahl
CHF 14.39
-
PFERD PFERD abrasive sleeve KSB D13xW25mm25 mm grit size 80 ( 4144200112 )
Thu, 10/09/2025
Scope of Delivery: - Sanding sleeve KSB D13xW25mm25 mm grit size 80 Product Description: Aluminium oxide A - for universal use from coarse to fine sanding - supplied without rubber backing Technical Data: - Drive type: Straight grinder, flexible shaft drive - Application recommendation: For best performance, use at a recommended cutting speed of 20-30 m/s. Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. For a secure fit of the abrasive sleeve, maintain the minimum speed of the abrasive sleeve carrier. To make it easy to change the sanding sleeves, turn them slightly clockwise to fit and remove them. Keep the abrasive sleeve carrier clamped in the tool drive. - Machinable materials: Grey/spheroidal cast iron (GG/GJL, GGG/GJS), malleable cast iron, brass, bronze, cast steel, cobalt-based alloys, aluminium, hardened, tempered steels over 1,200 N/mm² ( 54 HRC, steels up to 1,200 N/mm² ( - Machining tasks: Roughening, deburring, levelling, surface processing, fine grinding in stages, weld seam processing, edge processing, sharpening - Ordering information: Please order abrasive sleeve holder separately. - Ø inside: 13mm - RPM, opt., up to: 44000RPM - RPM, opt., from: 30000RPM - Safety instructions: The maximum permissible peripheral speed is 30 m/s. For safety reasons, the specified maximum permissible speed must never be exceeded. Do not allow the abrasive sleeves to protrude beyond the abrasive sleeve carrier. - Advantages: Maximum efficiency due to particularly high material removal and high aggressiveness of the abrasive. Secure fit of the abrasive sleeve on the abrasive sleeve carrier due to expansion of the carrier during use. Outstanding service life thanks to special manufacturing process - even under the toughest operating conditions.For commercial use, please observe the building regulations!
CHF 22.60
-
GEKA GEKA Gewindenippel GEKA Messing ( 4000353548 )
Thu, 10/09/2025
Lieferumfang:1x GEKA Gewindenippel GEKA MessingProduktbeschreibung: Messing · mit Innen- und Außengewinde · Innengewindeseitig mit Flachdichtring NBR
CHF 73.10
-
PLANAM PLANAM waistband trousers Canvas 320 size 50 ( 4705039002 )
Thu, 10/09/2025
Scope of Delivery: - 1x PLANAM Canvas 320 trousers size 50 Product Description: 65% polyester / 35% cotton - canvas weave - approx. 320 g/m² - fabric back very breathable, particularly hard-wearing, shrink-resistant according to DIN EN ISO 6330 - knee pockets made of Cordura® - 2 inset pouch pockets made of Cordura® - double ruler pockets made of Cordura® on the right - reflective piping on the pocket openings and pocket flaps - left thigh pocket with flap and press studs, elasticated waistband - 1 reinforced back pocket on the right - round waistband with 7 belt loops and jeans button this item is certified as knee protection according to EN 14404 type 2 level 1 in combination with a Planam knee pad available sizes on request: 42-64, 90-110 and 24-29 Technical Data: - Fabric weight approx.: 320g/m² - Finish: original Cordura® with PTFE coatingFor commercial use, please observe the building regulations!
CHF 32.81
-
MAYKESTAG Maykestag quarter circle profile cutter DIN 6518 B type N ( 4117802018 ) radius 10 mm number of cutting edges 4
Thu, 10/09/2025
Scope of Delivery: - 1x MAYKESTAG quarter circle profile cutter radius 10 mm Product Description: HSS-Co - DIN 6518 B - type N - straight shank with driving face - for milling structural, case-hardening and heat-treatable steels - right-hand cutting Technical Data: - Shank Ø d2: 25mm - Material suitability INOX: limited suitability - Ø d3: 8mm - Material suitability cast iron: limited suitability - Material suitability steel: very suitable - Shape: concave - Material suitability non-ferrous metals: conditionally suitable - Radius: 10 mm - Nominal Ø d1: 28 mm - Total length l1: 85 mm - Number of cutting edges: 4 - Shank design: DIN 1835 B - Type: N - Coating: uncoated - Standard: DIN 6518 B - Cutting material: HSS-Co - Brand: MAYKESTAGPlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!
CHF 77.76
-
Plastipol - Scheu GmbH & Co. KG Swivel stacking container ( 9000446940 ) PP blue
Thu, 10/09/2025
Scope of Delivery: - 1x swivel stacking container PP blue - Delivery without lid Product Description: made of polypropylene (PP) - can be nested inside each other or stacked effortlessly after a 180° turn - easy to handle - food-safe - temperature-resistant from -20 °C to +80 °C - limited resistance to oils, petrol and acids (please enquire) Technical Data: - Load capacity: 50kg - Temperature range: -20 to +80°C - Internal height: 295mm - Inner length: 450mm - Inner width: 330mm - Capacity: 50 litres - Colour: blue - Weight: 2.2kg - Outer length: 600 mm - Outer height: 300 mm - Outer width: 400 mm - Material: PolypropyleneFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 32.88
-
SHAVIV SHAVIV Deburring set Shaviv B ( 4114540051 )
Thu, 10/09/2025
Scope of Delivery: - Deburring set Shaviv B Product Description: The workhorse extremely tried and tested set for deburring holes, grooves and edges - accepts all B blades - blades can be clamped axially or radially as required with Classic A handle, B blade holder, B10, B20 blades for straight edges, internal machining front side Technical Data: - nanFor commercial use, please observe the building regulations!
CHF 17.98
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"