Products
-
AMF AMF screw-in support no. 6400M ( 4000833476 ) size 80 height 60 - 80 mm
Scope of Delivery: - 1x AMF screw jack size 80 Product Description: with flat support and magnetic base - spindle: trapezoidal thread, self-locking, with end stop - tempered steel, painted - the permanent magnet can be used to achieve precise positioning of the workpiece in a vertical position - Ø specification = without magnetic base Technical Data: - Max. load capacity: 100kN - Centre hole Ø: 12mm - H max.: 80mm - D2: 50mm - TR: 30 x 4mm - H min.: 60mm - D3: 55mm - D1: 50mm - Size: 80 - Brand: AMF - Feature: with flat support and magnetic base - Height: 60 - 80 mm - Model: No. 6400MPlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!
-
AMF AMF screw-in support no. 6430S Atlas ( 4000833127 ) size 140 height 100 - 140 mm
Fri, 09/19/2025
Scope of Delivery: - 1x AMF screw jack size 140 Product Description: with lock nut - spindle complete: heat-treated steel, with trapezoidal thread - burnished spindle head - base body: grey cast iron, painted - thanks to the robust design, the screw jacks with infinitely variable adjustability function reliably and precisely even under the heaviest loads Technical Data: - B1: 18mm - B2: 75mm - Max. load capacity: 60kN - Centre hole Ø: 12mm - H max.: 140mm - L: 110mm - TR: 30 x 6mm - H min.: 100mm - Width across flats: 46mm - Size: 140 - Brand: AMF - Feature: with locknut - Height: 100 - 140 mm - Model: No. 6430S AtlasFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 84.61
-
AMF AMF screw-in trestle no. 6430S Atlas ( 4000833128 ) size 200 height 140 - 200 mm
Scope of Delivery: - 1x AMF screw jack size 200 Product Description: with lock nut - spindle complete: heat-treated steel, with trapezoidal thread - burnished spindle head - base body: grey cast iron, painted - the robust design means that the screw jacks with infinitely variable adjustability function reliably and precisely even under the heaviest loads Technical Data: - B1: 18mm - B2: 75mm - Max. load capacity: 60kN - Centre hole Ø: 12mm - H max.: 200mm - L: 110mm - TR: 30 x 6mm - H min.: 140mm - Width across flats: 46mm - Size: 200 - Brand: AMF - Feature: with locknut - Height: 140 - 200 mm - Model: No. 6430S AtlasFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
-
AMF AMF screw-in trestle no. 6430S Atlas ( 4000833130 ) size 320 height 200 - 320 mm
Fri, 09/19/2025
Scope of Delivery: - 1x AMF screw jack size 320 Product Description: with lock nut - spindle complete: heat-treated steel, with trapezoidal thread - burnished spindle head - base body: grey cast iron, painted - the robust design means that the screw jacks with infinitely variable adjustability function reliably and precisely even under the heaviest loads Technical Data: - B1: 22mm - B2: 90mm - Max. load capacity: 40kN - Centre hole Ø: 12mm - H max.: 320mm - L: 160mm - TR: 30 x 6mm - H min.: 200mm - Width across flats: 46mm - Size: 320 - Brand: AMF - Feature: with locknut - Height: 200 - 320 mm - Model: No. 6430S AtlasFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 142.83
-
AMF AMF screw-in support attachment no. 6440 Insert spigot Ø 12 mm ( 4000833135 )
Fri, 09/19/2025
Scope of Delivery: - Screw-in trestle attachment no. 6440 Insert spigot Ø 12 mm Product Description: Ball - suitable for screw brackets with 12 mm centre hole - hardened and tempered steel - burnished finish Technical Data: - Insertion spigot Ø: 12mm - D: 37mm - H: 10mmFor commercial use, please observe the building regulations!
CHF 15.82
-
AMF AMF screw-in trestle attachment no. 6441 ( 4000833137 ) Insert spigot Ø 12 mm Outer Ø 65 mm
Fri, 09/19/2025
Scope of Delivery: - 1x AMF screw-in support attachment insert spigot-Ø 12 mm Product Description: Prism - suitable for screw brackets with 12 mm centre hole - hardened and tempered steel - burnished finish Technical Data: - Insertion spigot Ø: 12mm - D: 65mm - H: 30mm - D1: min. 22 mm / max. 100 mm - Shape: Prism - Brand: AMF - Outer Ø: 65 mmFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 46.58
-
AMF AMF push rod clamp no. 6840 ( 4000604395 ) size 5
Scope of Delivery: - 1x AMF push rod clamp size 5 - Supplied with hardened and tempered, galvanised tightening screw no. 6880 Product Description: without angled foot - push and pull clamp - (push rod and hand lever synchronised) - long push rod guide with fastening thread and nut Technical Data: - A: 16mm - L2: 25mm - M2: M24x1.5mm - HW min.: 30mm - L1: 171.5mm - HW max.: 50mm - H1: 99mm - F1: 4.5kN - B max.: 66.5mm - F2: 4.5kN - B min.: 26.5mm - L3: 158mm - E: 50mm - N: 34.5mm - Size: 5 - Pressure screw: M12 x 50 - Stroke: 40 mm - Length clamped: 171.5 mm - Height clamped: 99 mm - Holding force F2: 4.5 kN - Holding force F1: 4.5 kN - Brand: AMFFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
-
AMF AMF push rod clamp no. 6840 size 2 ( 4000604393 )
Fri, 09/19/2025
Scope of Delivery: - Push rod clamp no. 6840 size 2 - Supplied with hardened and tempered, galvanised tightening screw no. 6880 Product Description: without angled foot - push and pull clamp - (push rod and hand lever synchronised) - long push rod guide with fastening thread and nut Technical Data: - A: 10mm - L2: 19mm - M2: M16x1.5mm - HW min.: 17mm - L1: 114mm - HW max.: 25mm - H1: 66mm - F1: 2kN - B max.: 46mm - F2: 2kN - B min.: 20mm - L3: 105mm - E: 20mm - N: 22mmFor commercial use, please observe the building regulations!
CHF 40.09
-
AMF AMF push rod clamp no. 6840 size 3 ( 4000604394 )
Scope of Delivery: - Push rod clamp no. 6840 size 3 - Supplied with hardened and tempered, galvanised tightening screw no. 6880 Product Description: without angled foot - push and pull clamp - (push rod and hand lever synchronised) - long push rod guide with fastening thread and nut Technical Data: - A: 12mm - L2: 22mm - M2: M20x1.5mm - HW min.: 22mm - L1: 140mm - HW max.: 35mm - H1: 82.5mm - F1: 2.5kN - B max.: 56mm - F2: 2.5kN - B min.: 24mm - L3: 127mm - E: 30mm - N: 27mmFor commercial use, please observe the building regulations!
-
AMF AMF push rod clamp no. 6841 size 0 ( 4000833515 )
Fri, 09/19/2025
Scope of Delivery: - Push rod clamp no. 6841 size 0 - Supplied with hardened and tempered, galvanised tightening screw no. 6880 Product Description: with small angled foot - push and pull clamp - with long push rod guide - the clamp can be attached to sheet metal walls without an angled foot or screwed into fixture bodies with a thread on the end face Technical Data: - A: 6.5mm - D: 4.5mm - M max: 16mm - L2: 10mm - M2: M10x1mm - L1: 66.5mm - H1: 49.3mm - F1: 0.8kN - Total height: 47mm - B max: 33mm - Bore Ø: 4.5mm - F2: 0.8kN - B min.: 17mm - P: 16mm - K: 6.5mm - E: 13mm - H: 12mm - N: 25mm - Total length: 66mmFor commercial use, please observe the building regulations!
CHF 38.86
-
AMF AMF push rod clamp no. 6841 size 1 ( 4000833516 )
Fri, 09/19/2025
Scope of Delivery: - Push rod clamp no. 6841 size 1 - Supplied with hardened and tempered, galvanised tightening screw no. 6880 Product Description: with small angled foot - push and pull clamp - with long push rod guide - the clamp can be attached to sheet metal walls without an angled foot or screwed into fixture bodies with a thread on the end face Technical Data: - A: 8mm - D: 4.5mm - M max.: 19.5mm - M min: 16mm - L2: 16mm - M2: M12x1.5mm - L1: 91mm - H1: 60.5mm - F1: 1kN - Total height: 60mm - B max: 44.5mm - Bore Ø: 4.5mm - F2: 1kN - B min.: 24.5mm - P: 20mm - K: 7mm - E: 20mm - H: 15mm - N: 30mm - Total length: 91mmFor commercial use, please observe the building regulations!
CHF 39.88
-
AMF AMF push rod clamp no. 6841 size 2 ( 4000833517 )
Fri, 09/19/2025
Scope of Delivery: - Push rod clamp no. 6841 size 2 - Supplied with hardened and tempered, galvanised tightening screw no. 6880 Product Description: with small angled foot - push and pull clamp - with long push rod guide - the clamp can be attached to sheet metal walls without an angled foot or screwed into fixture bodies with a thread on the end face Technical Data: - A: 10mm - D: 5.6mm - M max.: 36mm - M min.: 31.8mm - L2: 19mm - M2: M16x1.5mm - L1: 114mm - H1: 85.5mm - F1: 2kN - Total height: 95mm - B max: 58.5mm - Bore Ø: 5.6 mm - F2: 2kN - B min.: 32.5mm - P: 34mm - K: 12.5mm - E: 20mm - H: 20mm - N: 50mm - Total length: 114mmFor commercial use, please observe the building regulations!
CHF 43.04
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"