Only this week: 10% off all BOSCH power tools - discount will be deducted in the shopping cart

Direkt ist günstiger für Dich!Direkt ist günstiger für Dich!

Wusstest du, dass Preisvergleich-Plattformen und Suchmaschinen bei jedem Kauf fett mitverdienen? Über 20 % vom Preis gehen nur für Werbung drauf – und das zahlen am Ende alle mit. Wir sagen: Nein danke und möchten die Werbekosten lieber als Preisreduktion an Euch weitergeben!

Aus diesem Grund übermitteln wir nicht mehr unseren gesamten Bestand, die Bestpreis-Angebote und Deals an die großen Plattformen und können Dir so - neben den Geschenken, BROpoints und anderen Vorteilen - wesentlich bessere Preise geben, die Du ausschließlich bei uns findest. Deswegen lohnt es sich, ohne Umwege, direkt zu uns zu kommen.

Initiative für bessere Preise und mehr Fairness im Online-Handel.

Finde hier ALLE ANGEBOTE, für die wir derzeit den Online-Bestpreis haben.

Accessories for Sanders

5421 products

Show previous products

  • PFERD sanding sleeve ( 4144210050 ) D15xW30mm30 mm grit 60 max. speed 36000 min-¹

    PFERD PFERD sanding sleeve ( 4144210050 ) D15xW30mm30 mm grit 60 max. speed 36000 min-¹

    Tue, 11/18/2025

    Scope of Delivery: - 1x PFERD sanding sleeve D15xW30mm30 mm grit size 60 Product Description: Aluminium oxide A - for universal use from coarse to fine sanding - supplied without rubber backing Technical Data: - Drive type: Straight grinder, flexible shaft drive - Recommendation for use: For easy replacement of the sanding sleeves, pull them on and off with a slight clockwise rotation. Leave the abrasive sleeve holder clamped in the tool drive. Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. For best performance, use at a recommended cutting speed of 20-30 m/s. For a secure fit of the abrasive sleeve, observe the minimum speed of the abrasive sleeve holder. - Machinable materials: Fibre-reinforced thermosetting plastics (GRP, CFRP), brass, bronze, cast steel, aluminium, copper, malleable cast iron, hardened, tempered steels over 1,200 N/mm² ( 54 HRC, steels up to 1,200 N/mm² (For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

    Read more

    1 - 2 business days

    CHF 65.20

  • PFERD Schleifhülse ( 4144210032 ) D13xB25mm25 mm Körnung 150 max. Drehzahl 44000 min-¹

    Options

    PFERD PFERD Schleifhülse ( 4144210032 ) D13xB25mm25 mm Körnung 150 max. Drehzahl 44000 min-¹

    Lieferumfang:- 1x PFERD Schleifhülse D13xB25mm25 mm Körnung 150Produktbeschreibung:Korund A · für den universellen Einsatz von Grob- bis Feinschliff · Lieferung ohne GummiträgerTechnische Daten:- Antriebsart: Biegwellenantrieb, Geradschleifer - Anwendungsempfehlung: Für den Werkstoff geeignetes Schleiföl verwenden, um die Standzeit und Schleifleistung der Werkzeuge deutlich zu erhöhen. Für beste Leistung bei einer empfohlenen Schnittgeschwindigkeit von 20-30 m/s einsetzen. Für einen sicheren Sitz der Schleifhülse die Mindestdrehzahl des Schleifhülsenträgers einhalten. Für einen leichten Wechsel der Schleifhülsen diese unter leichter Rechtsdrehung auf- und abziehen. Dabei den Schleifhülsenträger in den Werkzeugantrieb eingespannt lassen. - Bearbeitbare Werkstoffe: Stähle bis 1.200 N/mm² (< 38 HRC), Bronze, Stahlguss, Kobaltbasislegierungen, Kupfer, Faserverstärkte Duroplaste (GFK, CFK), Grau-/Sphäroguss (GG/GJL, GGG/GJS), Gehärtete, vergütete Stähle über 1.200 N/mm² (< 38 HRC), Stahlwerkstoffe mit einer Härte > 54 HRC, Temperguss, Thermoplaste, Aluminium, Edelstahl (INOX), Messing - Bearbeitungsaufgaben: Flächenbearbeitung, Aufrauen, Schärfen, Schweißnahtbearbeitung, Stufenweises Feinschleifen, Entgraten, Kantenbearbeitung, Egalisieren - Bestellhinweise: Schleifhülsenträger bitte separat bestellen. - Ø Innen: 13mm - RPM, opt., bis: 44000RPM - RPM, opt., von: 30000RPM - Sicherheitshinweise: Die maximal zulässige Umfangsgeschwindigkeit beträgt 30 m/s. Die angegebene maximal zulässige Drehzahl darf aus Sicherheitsgründen nie überschritten werden. Schleifhülsen nicht über den Schleifhülsenträger überstehen lassen. - Vorteile: Herausragende Standzeit durch spezielles Fertigungsverfahren – auch unter härtesten Einsatzbedingungen. Höchste Wirtschaftlichkeit durch besonders hohen Materialabtrag und hohe Aggressivität des Schleifmittels. Sicherer Sitz der Schleifhülse auf dem Schleifhülsenträger durch Ausdehnen des Trägers im Einsatz.- Körnung: 150 - max. Drehzahl: 44000 min-¹- Breite: 25 mm- Werkstoffeignung INOX: sehr gut geeignet - Werkstoffeignung Aluminium: sehr gut geeignet - Werkstoffeignung Stahl: sehr gut geeignet - Material: Korund A - Ø: 13 mm- Marke: PFERDBei gewerblicher Nutzung beachten Sie bitte die Bauvorschriften!

    Read more

    Pre-order

    CHF 63.81

    Options

  • PFERD sanding sleeve ( 4144210052 ) D15xW30mm30 mm grit size 80 max. speed 36000 min-¹

    PFERD PFERD sanding sleeve ( 4144210052 ) D15xW30mm30 mm grit size 80 max. speed 36000 min-¹

    Tue, 11/18/2025

    Scope of Delivery: - 1x PFERD sanding sleeve D15xW30mm30 mm grit size 80 Product Description: Aluminium oxide A - for universal use from coarse to fine sanding - supplied without rubber backing Technical Data: - Drive type: Straight grinder, flexible shaft drive - Application recommendation: For best performance, use at a recommended cutting speed of 20-30 m/s. Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. For a secure fit of the abrasive sleeve, maintain the minimum speed of the abrasive sleeve carrier. To make it easy to change the sanding sleeves, turn them slightly clockwise to fit and remove them. Keep the abrasive sleeve carrier clamped in the tool drive. - Machinable materials: Steel materials with a hardness > 54 HRC, aluminium, malleable cast iron, brass, bronze, cast steel, cobalt-based alloys, copper, fibre-reinforced thermosets (GRP, CFRP), grey/spheroidal graphite cast iron (GG/GJL, GGG/GJS), stainless steel (INOX), steels up to 1,200 N/mm² (For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

    Read more

    1 - 2 business days

    CHF 65.20

  • PFERD sanding sleeve ( 4144210030 ) D13xW25mm25 mm grit size 80 max. speed 44000 min-¹

    PFERD PFERD sanding sleeve ( 4144210030 ) D13xW25mm25 mm grit size 80 max. speed 44000 min-¹

    Tue, 11/18/2025

    Scope of Delivery: - 1x PFERD abrasive sleeve D13xW25mm25 mm grit size 80 Product Description: Aluminium oxide A - for universal use from coarse to fine sanding - supplied without rubber backing Technical Data: - Drive type: Straight grinder, flexible shaft drive - Application recommendation: For a secure fit of the abrasive sleeve, observe the minimum speed of the abrasive sleeve carrier. For easy replacement of the abrasive sleeves, mount and remove them by turning them slightly clockwise. Keep the abrasive sleeve carrier clamped in the tool drive. For best performance, use at a recommended cutting speed of 20-30 m/s. Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. - Machinable materials: Stainless steel (INOX), cobalt-based alloys, copper, fibre-reinforced thermosets (GRP, CFRP), thermoplastics, hardened, tempered steels over 1,200 N/mm² ( 54 HRC, steels up to 1,200 N/mm² (For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

    Read more

    1 - 2 business days

    CHF 63.81

  • PFERD sanding sleeve ( 4144210008 ) D10xW20mm20 mm grit 150 max. speed 44000 min-¹

    Options

    PFERD PFERD sanding sleeve ( 4144210008 ) D10xW20mm20 mm grit 150 max. speed 44000 min-¹

    Scope of Delivery: - 1x PFERD abrasive sleeve D10xW20mm20 mm grit 150 Product Description: Aluminium oxide A - for universal use from coarse to fine sanding - supplied without rubber backing Technical Data: - Drive type: Straight grinder, flexible shaft drive - Application recommendation: For a secure fit of the abrasive sleeve, observe the minimum speed of the abrasive sleeve carrier. To make it easy to change the abrasive sleeves, turn them slightly clockwise to mount and remove them. Keep the abrasive sleeve carrier clamped in the tool drive. For best performance, use at a recommended cutting speed of 20-30 m/s. Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. - Machinable materials: Stainless steel (INOX), aluminium, thermoplastics, steels up to 1,200 N/mm² ( 54 HRC, hardened, tempered steels over 1,200 N/mm² (For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

    Read more

    Pre-order

    CHF 65.20

    Options

  • PFERD sanding sleeve ( 4144210037 ) D15xW30mm30 mm grit size 50 max. speed 36000 min-¹

    PFERD PFERD sanding sleeve ( 4144210037 ) D15xW30mm30 mm grit size 50 max. speed 36000 min-¹

    Tue, 11/18/2025

    Scope of Delivery: - 1x PFERD sanding sleeve D15xW30mm30 mm grit size 50 Product Description: Aluminium oxide A - for universal use from coarse to fine sanding - supplied without rubber backing Technical Data: - Drive type: Straight grinder, flexible shaft drive - Application recommendation: For easy replacement of the sanding sleeves, pull them on and off with a slight clockwise rotation. Leave the abrasive sleeve holder clamped in the tool drive. Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. For best performance, use at a recommended cutting speed of 20-30 m/s. For a secure fit of the abrasive sleeve, observe the minimum speed of the abrasive sleeve holder. - Machinable materials: Bronze, cast steel, cobalt-based alloys, aluminium, malleable cast iron, thermoplastics, brass, copper, fibre-reinforced thermosets (GRP, CFRP), grey/spheroidal graphite cast iron (GG/GJL, GGG/GJS), hardened, tempered steels over 1,200 N/mm² ( 54 HRC, steels up to 1,200 N/mm² (For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

    Read more

    1 - 2 business days

    CHF 65.20

  • PFERD sanding sleeve ( 4144210007 ) D10xW20mm20 mm grit size 80 max. speed 44000 min-¹

    Options

    PFERD PFERD sanding sleeve ( 4144210007 ) D10xW20mm20 mm grit size 80 max. speed 44000 min-¹

    Scope of Delivery: - 1x PFERD sanding sleeve D10xW20mm20 mm grit size 80 Product Description: Aluminium oxide A - for universal use from coarse to fine sanding - supplied without rubber backing Technical Data: - Drive type: Flexible shaft drive, straight grinder - Application recommendation: For easy replacement of the sanding sleeves, pull them on and off with a slight clockwise rotation. Keep the abrasive sleeve holder clamped in the tool drive. Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. For best performance, use at a recommended cutting speed of 20-30 m/s. For a secure fit of the abrasive sleeve, observe the minimum speed of the abrasive sleeve holder. - Machinable materials: Grey/spheroidal cast iron (GG/GJL, GGG/GJS), aluminium, malleable cast iron, brass, cobalt-based alloys, copper, bronze, hardened, tempered steels over 1,200 N/mm² ( 54 HRC, steels up to 1,200 N/mm² (For commercial use, please observe the building regulations!).For commercial use, please observe the building regulations!

    Read more

    Pre-order

    CHF 65.20

    Options

  • PFERD Schleifhülse GSB D45xB30mm30 mm Körnung 40 ( 8000433900 )

    Options

    PFERD PFERD Schleifhülse GSB D45xB30mm30 mm Körnung 40 ( 8000433900 )

    Lieferumfang:1x PFERD Schleifhülse GSB D45xB30mm30 mm Körnung 40Produktbeschreibung: für grobe Schleifaufgaben bei hoher Abtragsleistung und Standzeit · GSB = Großpack Schleifhülsen · Lieferung ohne Gummiträger Weitere technische Daten: Antriebsart: Biegwellenantrieb, Geradschleifer Anwendungsempfehlung: Für einen sicheren Sitz der Schleifhülse die Mindestdrehzahl des Schleifhülsenträgers einhalten. Für einen leichten Wechsel der Schleifhülsen diese unter leichter Rechtsdrehung auf- und abziehen. Dabei den Schleifhülsenträger in den Werkzeugantrieb eingespannt lassen. Für den Werkstoff geeignetes Schleiföl verwenden, um die Standzeit und Schleifleistung der Werkzeuge deutlich zu erhöhen. Für beste Leistung bei einer empfohlenen Schnittgeschwindigkeit von 20-30 m/s einsetzen. Bearbeitbare Werkstoffe: Stahlwerkstoffe mit einer Härte > 54 HRC, Gehärtete, vergütete Stähle über 1.200 N/mm² (< 38 HRC), Stahlguss, Stähle bis 1.200 N/mm² (< 38 HRC), Edelstahl (INOX), Temperguss, Messing, Grau-/Sphäroguss (GG/GJL, GGG/GJS), Bronze, Kupfer, Kobaltbasislegierungen, Titan Bearbeitungsaufgaben: Kantenbearbeitung, Stufenweises Feinschleifen, Flächenbearbeitung, Schärfen, Aufrauen, Egalisieren, Schweißnahtbearbeitung, Entgraten Bestellhinweise: Schleifhülsenträger bitte separat bestellen. Ø Innen: 45mm RPM, opt., bis: 12700RPM RPM, opt., von: 8500RPM Sicherheitshinweise: Die maximal zulässige Umfangsgeschwindigkeit beträgt 30 m/s. Die angegebene maximal zulässige Drehzahl darf aus Sicherheitsgründen nie überschritten werden. Schleifhülsen nicht über den Schleifhülsenträger überstehen lassen. Vorteile: Herausragende Standzeit durch spezielles Fertigungsverfahren – auch unter härtesten Einsatzbedingungen. Höchste Wirtschaftlichkeit durch besonders hohen Materialabtrag und hohe Aggressivität des Schleifmittels. Sicherer Sitz der Schleifhülse auf dem Schleifhülsenträger durch Ausdehnen des Trägers im Einsatz.

    Read more

    Pre-order

    CHF 109.59

    Options

  • PFERD abrasive sleeve GSB CO-COOL D30xW30mm30 mm grit size 36 ( 8000433831 )

    PFERD PFERD abrasive sleeve GSB CO-COOL D30xW30mm30 mm grit size 36 ( 8000433831 )

    Tue, 11/18/2025

    Scope of Delivery: - 1x PFERD abrasive sleeve GSB CO-COOL D30xW30mm30 mm grit size 36 Product Description: for grinding hard, tough and poorly heat-conducting materials - self-sharpening ceramic grain - abrasive additives in the coating achieve a significantly higher stock removal rate, prevent clogging and ensure cooler grinding - GSB = bulk pack of abrasive sleeves - supplied without rubber backing Technical Data: - Drive type: Straight grinder, flexible shaft drive - Application recommendation: Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. For best performance, use at a recommended cutting speed of 20-30 m/s. For a secure fit of the abrasive sleeve, maintain the minimum speed of the abrasive sleeve holder. To make it easy to change the abrasive sleeves, turn them slightly clockwise to mount and remove them. Keep the abrasive sleeve carrier clamped in the tool drive. - Machinable materials: Titanium, grey/spheroidal cast iron (GG/GJL, GGG/GJS), cobalt-based alloys, bronze, malleable cast iron, aluminium, stainless steel (INOX), nickel-based alloys (e.g. Inconell and Hasteloy) - Machining tasks: Deburring, levelling, surface processing, weld seam processing, fine grinding in stages, sharpening, edge processing, roughening - Ordering information: Please order abrasive sleeve holder separately. - Ø inside: 30mm - RPM, opt., up to: 19100RPM - RPM, opt., from: 13000RPM - Safety instructions: The maximum permissible peripheral speed is 30 m/s. For safety reasons, the specified maximum permissible speed must never be exceeded. Do not allow the abrasive sleeves to protrude beyond the abrasive sleeve holder. - Advantages: Secure fit of the abrasive sleeve on the abrasive sleeve carrier due to expansion of the carrier during use. Outstanding service life thanks to special manufacturing process - even under the toughest operating conditions. The packaging size is ideal for industrial requirements. Maximum cost-effectiveness thanks to particularly high material removal and high abrasive aggressiveness.For commercial use, please observe the building regulations!

    Read more

    1 - 2 business days

    CHF 102.66

  • PFERD abrasive sleeve GSB CO-COOL D15xW30mm30 mm grit size 80 ( 8000433818 )

    Options

    PFERD PFERD abrasive sleeve GSB CO-COOL D15xW30mm30 mm grit size 80 ( 8000433818 )

    Scope of Delivery: - 1x PFERD abrasive sleeve GSB CO-COOL D15xW30mm30 mm grit size 80 Product Description: for grinding hard, tough and poorly heat-conducting materials - self-sharpening ceramic grain - abrasive additives in the coating achieve a significantly higher stock removal rate, prevent clogging and ensure cooler grinding - GSB = bulk pack of abrasive sleeves - supplied without rubber backing Technical Data: - Drive type: Straight grinder, flexible shaft drive - Recommendation for use: For easy replacement of the sanding sleeves, pull them on and off with a slight clockwise rotation. Keep the abrasive sleeve holder clamped in the tool drive. For best performance, use at a recommended cutting speed of 20-30 m/s. Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. For a secure fit of the abrasive sleeve, observe the minimum speed of the abrasive sleeve carrier. - Machinable materials: Nickel-based alloys (e.g. Inconell and Hasteloy), aluminium, malleable cast iron, bronze, grey/spheroidal cast iron (GG/GJL, GGG/GJS), stainless steel (INOX), titanium, cobalt-based alloys - Machining tasks: Roughening, deburring, levelling, sharpening, surface processing, weld seam processing, edge processing, fine grinding in stages - Ordering information: Please order abrasive sleeve holder separately. - Ø inside: 15mm - RPM, opt., up to: 36000RPM - RPM, opt., from: 26000RPM - Safety instructions: The maximum permissible peripheral speed is 30 m/s. For safety reasons, the specified maximum permissible speed must never be exceeded. Do not allow abrasive sleeves to protrude beyond the abrasive sleeve carrier. - Advantages: Outstanding service life thanks to special manufacturing process - even under the toughest operating conditions. Secure fit of the abrasive sleeve on the abrasive sleeve carrier due to expansion of the carrier during use. The packaging size is ideal for industrial requirements. Maximum cost-effectiveness thanks to particularly high material removal and high abrasive aggressiveness.For commercial use, please observe the building regulations!

    Read more

    Pre-order

    CHF 88.79

    Options

  • PFERD abrasive sleeve GSB CO-COOL D15xW30mm30 mm grit size 60 ( 8000433817 )

    PFERD PFERD abrasive sleeve GSB CO-COOL D15xW30mm30 mm grit size 60 ( 8000433817 )

    Tue, 11/18/2025

    Scope of Delivery: - 1x PFERD abrasive sleeve GSB CO-COOL D15xW30mm30 mm grit size 60 Product Description: for grinding hard, tough and poorly heat-conducting materials - self-sharpening ceramic grain - abrasive additives in the coating achieve a significantly higher stock removal rate, prevent clogging and ensure cooler grinding - GSB = bulk pack of abrasive sleeves - supplied without rubber backing Technical Data: - Drive type: Flexible shaft drive, straight grinder - Application recommendation: For best performance, use at a recommended cutting speed of 20-30 m/s. For an easy change of the abrasive sleeves, mount and remove them with a slight clockwise rotation. Keep the abrasive sleeve holder clamped in the tool drive. For a secure fit of the abrasive sleeve, maintain the minimum speed of the abrasive sleeve carrier. Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. - Machinable materials: Bronze, cobalt-based alloys, grey/spheroidal cast iron (GG/GJL, GGG/GJS), nickel-based alloys (e.g. Inconell and Hasteloy), titanium, aluminium, malleable cast iron, stainless steel (INOX) - Machining tasks: Deburring, weld seam processing, surface processing, sharpening, roughening, fine grinding in stages, levelling, edge processing - Ordering information: Please order abrasive sleeve holder separately. - Ø inside: 15mm - RPM, opt., up to: 36000RPM - RPM, opt., from: 26000RPM - Safety instructions: The maximum permissible peripheral speed is 30 m/s. For safety reasons, the specified maximum permissible speed must never be exceeded. Do not allow the abrasive sleeves to protrude beyond the abrasive sleeve holder. - Advantages: Secure fit of the abrasive sleeve on the abrasive sleeve carrier due to expansion of the carrier during use. The packaging size is ideal for industrial requirements. Outstanding service life thanks to special manufacturing process - even under the toughest operating conditions. Maximum cost-effectiveness thanks to particularly high material removal and high abrasive aggressiveness.For commercial use, please observe the building regulations!

    Read more

    1 - 2 business days

    CHF 88.79

  • PFERD abrasive sleeve GSB D20xW63mm63 mm grit size 40 ( 4144230010 )

    PFERD PFERD abrasive sleeve GSB D20xW63mm63 mm grit size 40 ( 4144230010 )

    Tue, 11/18/2025

    Scope of Delivery: - 1x PFERD abrasive sleeve GSB D20xW63mm63 mm grit size 40 Product Description: aluminium oxide A - conical shape - tear-resistant, fully resin-bonded material - good grain adhesion ensures a long service life - the addition of grease or grinding oil is recommended, especially for light metal processing - for universal use from coarse to fine grinding - supplied without rubber backing Technical Data: - largest strap Ø: 20mm - smallest strap Ø: 14mmFor commercial use, please observe the building regulations!

    Read more

    1 - 2 business days

    CHF 208.79

I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"

Show more products

Log in

Forgot your password?

Don't have an account yet?
Create account