Only this week: 10% off all BOSCH power tools - discount will be deducted in the shopping cart

Description

SKU: 133301
EAN: 4007220772287

Scope of Delivery:
- 1x PFERD abrasive sleeve GSB CO-COOL D30xW30mm30 mm grit size 36

Product Description:
for grinding hard, tough and poorly heat-conducting materials - self-sharpening ceramic grain - abrasive additives in the coating achieve a significantly higher stock removal rate, prevent clogging and ensure cooler grinding - GSB = bulk pack of abrasive sleeves - supplied without rubber backing

Technical Data:
- Drive type: Straight grinder, flexible shaft drive
- Application recommendation: Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. For best performance, use at a recommended cutting speed of 20-30 m/s. For a secure fit of the abrasive sleeve, maintain the minimum speed of the abrasive sleeve holder. To make it easy to change the abrasive sleeves, turn them slightly clockwise to mount and remove them. Keep the abrasive sleeve carrier clamped in the tool drive.
- Machinable materials: Titanium, grey/spheroidal cast iron (GG/GJL, GGG/GJS), cobalt-based alloys, bronze, malleable cast iron, aluminium, stainless steel (INOX), nickel-based alloys (e.g. Inconell and Hasteloy)
- Machining tasks: Deburring, levelling, surface processing, weld seam processing, fine grinding in stages, sharpening, edge processing, roughening
- Ordering information: Please order abrasive sleeve holder separately.
- Ø inside: 30mm
- RPM, opt., up to: 19100RPM
- RPM, opt., from: 13000RPM
- Safety instructions: The maximum permissible peripheral speed is 30 m/s. For safety reasons, the specified maximum permissible speed must never be exceeded. Do not allow the abrasive sleeves to protrude beyond the abrasive sleeve holder.
- Advantages: Secure fit of the abrasive sleeve on the abrasive sleeve carrier due to expansion of the carrier during use. Outstanding service life thanks to special manufacturing process - even under the toughest operating conditions. The packaging size is ideal for industrial requirements. Maximum cost-effectiveness thanks to particularly high material removal and high abrasive aggressiveness.

For commercial use, please observe the building regulations!

Read more

Product form

PFERD abrasive sleeve GSB CO-COOL D30xW30mm30 mm grit size 36 ( 8000433831 )

  • Vendor PFERD
  • condition  New
  • Unzufrieden? 100 Tage kostenfreie Retoure

    Information on importing to Switzerland! 🇨🇭🇱🇮 We take care of customs clearance. You will receive your package as normal within the delivery time and you don't have to worry about anything. Your invoice includes Swiss VAT. Placing an order with us feels like a normal domestic order for you. The same goes for returns!

    CHF 103.15
    incl. VAT, plus shipping

    As a member you will receive [points_amount]

    in stock delivery expected in  Thu, 10/16/2025

      • American Express
      • Apple Pay
      • Google Pay
      • PayPal
      • Klarna
      • Mastercard
      • +12 weitere

      +780.000 BROs folgen uns auf

       

      Smarte Produktberatung

      Rechnung, Versand & GPSR

      Versand & Rechnung durch: Dinotech e.K.

      Responsible Person for the EU (GPSR) EU-based economic operator that ensures the product complies with the necessary regulations.
      • info@pferd.com
      • +49226490
      • Germany
      • 51709 Marienheide
      • Hauptstr. 13
      • August Rüggeberg GmbH&Co. KG Pferd - Werkzeuge

      Description

      SKU: 133301
      EAN: 4007220772287

      Scope of Delivery:
      - 1x PFERD abrasive sleeve GSB CO-COOL D30xW30mm30 mm grit size 36

      Product Description:
      for grinding hard, tough and poorly heat-conducting materials - self-sharpening ceramic grain - abrasive additives in the coating achieve a significantly higher stock removal rate, prevent clogging and ensure cooler grinding - GSB = bulk pack of abrasive sleeves - supplied without rubber backing

      Technical Data:
      - Drive type: Straight grinder, flexible shaft drive
      - Application recommendation: Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. For best performance, use at a recommended cutting speed of 20-30 m/s. For a secure fit of the abrasive sleeve, maintain the minimum speed of the abrasive sleeve holder. To make it easy to change the abrasive sleeves, turn them slightly clockwise to mount and remove them. Keep the abrasive sleeve carrier clamped in the tool drive.
      - Machinable materials: Titanium, grey/spheroidal cast iron (GG/GJL, GGG/GJS), cobalt-based alloys, bronze, malleable cast iron, aluminium, stainless steel (INOX), nickel-based alloys (e.g. Inconell and Hasteloy)
      - Machining tasks: Deburring, levelling, surface processing, weld seam processing, fine grinding in stages, sharpening, edge processing, roughening
      - Ordering information: Please order abrasive sleeve holder separately.
      - Ø inside: 30mm
      - RPM, opt., up to: 19100RPM
      - RPM, opt., from: 13000RPM
      - Safety instructions: The maximum permissible peripheral speed is 30 m/s. For safety reasons, the specified maximum permissible speed must never be exceeded. Do not allow the abrasive sleeves to protrude beyond the abrasive sleeve holder.
      - Advantages: Secure fit of the abrasive sleeve on the abrasive sleeve carrier due to expansion of the carrier during use. Outstanding service life thanks to special manufacturing process - even under the toughest operating conditions. The packaging size is ideal for industrial requirements. Maximum cost-effectiveness thanks to particularly high material removal and high abrasive aggressiveness.

      For commercial use, please observe the building regulations!

      Read more

      Recently Viewed

      Top questions at a glance

      How can I pay for my order?

      We offer a wide range of secure payment methods:

      online payment methods

      PayPal, KLARNA, Google Pay, Apple Pay and Shop Pay.

      Credit cards

      You can also pay with the major credit cards VISA, MasterCard and American Express. In this case, the payment is secured using the 3D-Secure method. If we have any reason to suspect fraudulent ordering, we will automatically cancel the payment.

      How can I pay for my order?
      How do I receive an invoice?

      You will automatically receive the invoice from our shipping partner in a separate email after receipt of payment. It will not come with the confirmation of receipt. In addition, a paper invoice will be enclosed with the order.

      Therefore, please also check your spam folder again thoroughly and otherwise get in touch here in our invoice portal.

      How do I receive an invoice?
      Returns: I want to return something

      If you wish to return all or part of your order and you're from the EU 🇪🇺, please check our returns portal.

      For returns from Switzerland 🇨🇭 and Liechtenstein 🇱🇮, use this returns portal.

      Where is my order?

      There are various ways to track the shipment status:

      The dispatch usually takes 1 - 2 working days. If it takes longer or you think the parcel has disappeared, please contact us here in our problem portal.

      Your tool family

      • <strong>Personalized support</strong>

        Personalized support

        Unlike many other platforms, we offer you personal advice and service that supports you at all times.

      • <strong></strong>

      • <strong>Best Prices</strong>

        Best Prices

        For each item with this symbol, you will currently receive the best online price (for the german market) from us. You can find the exact information on this on the product pages.

      This is Toolbrothers

      Tools are the engine of our society. Whether you're building a house, bought an IKEA cabinet or finally want to fix that leaky faucet, you need tools. We provide you with tools – and in true Toolbrothers style.
      • Super fast
      • Reliable
      • With the best service

      Log in

      Forgot your password?

      Don't have an account yet?
      Create account