Only this week: 10% off all BOSCH power tools - discount will be deducted in the shopping cart

Description

SKU: 138690
EAN: 4007220148549

Scope of Delivery:
- 1x PFERD sanding sleeve D60xW30mm30 mm grit size 40

Product Description:
Aluminium oxide A - for universal use from coarse to fine sanding - supplied without rubber backing

Technical Data:
- Drive type: Flexible shaft drive, straight grinder
- Application recommendation: For easy replacement of the sanding sleeves, pull them on and off with a slight clockwise rotation. Keep the abrasive sleeve holder clamped in the tool drive. For a secure fit of the abrasive sleeve, maintain the minimum speed of the abrasive sleeve carrier. For best performance, use at a recommended cutting speed of 20-30 m/s. Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools.
- Machinable materials: Aluminium, steels up to 1,200 N/mm² ( 54 HRC, cobalt-based alloys
- Machining tasks: Edge processing, fine grinding in stages, levelling, roughening, sharpening, surface processing, deburring, weld seam processing
- Ordering information: Please order abrasive sleeve holder separately.
- Ø inside: 60mm
- RPM, opt., up to: 9500RPM
- RPM, opt., from: 6500RPM
- Safety instructions: The maximum permissible peripheral speed is 30 m/s. For safety reasons, the specified maximum permissible speed must never be exceeded. Do not allow the abrasive sleeves to protrude beyond the abrasive sleeve carrier.
- Advantages: Outstanding service life thanks to special manufacturing process - even under the toughest operating conditions. Maximum efficiency thanks to particularly high material removal and high abrasive aggressiveness. Secure fit of the abrasive sleeve on the abrasive sleeve backing due to expansion of the backing during use.
- Grit size: 40
- Max. speed: 9500 min-¹
- Width: 30 mm
- Material suitability INOX: very suitable
- Material suitability aluminium: very suitable
- Material suitability steel: very suitable
- Material: Aluminium oxide A
- Ø: 60 mm
- Brand: PFERD For commercial use, please observe the building regulations!

For commercial use, please observe the building regulations!

Read more

Product form

PFERD sanding sleeve ( 4144210180 ) D60xW30mm30 mm grit 40 max. speed 9500 min-¹

  • Vendor PFERD
  • condition  New
  • Unzufrieden? 100 Tage kostenfreie Retoure
  • Shipped today? Order within: Sep 24, 2025 14:00:00 +0200

Information on importing to Switzerland! 🇨🇭🇱🇮 We take care of customs clearance. You will receive your package as normal within the delivery time and you don't have to worry about anything. Your invoice includes Swiss VAT. Placing an order with us feels like a normal domestic order for you. The same goes for returns!

CHF 121.39
incl. VAT, plus shipping

As a member you will receive [points_amount]

in stock delivery expected in  Sun, 09/28/2025

    • American Express
    • Apple Pay
    • Google Pay
    • PayPal
    • Visa
    • Klarna
    • Mastercard

    Smarte Produktberatung

     
    • Responsible Person for the EU (GPSR) EU-based economic operator that ensures the product complies with the necessary regulations.
      • info@pferd.com
      • +49226490
      • Germany
      • 51709 Marienheide
      • Hauptstr. 13
      • August Rüggeberg GmbH&Co. KG Pferd - Werkzeuge

    Description

    SKU: 138690
    EAN: 4007220148549

    Scope of Delivery:
    - 1x PFERD sanding sleeve D60xW30mm30 mm grit size 40

    Product Description:
    Aluminium oxide A - for universal use from coarse to fine sanding - supplied without rubber backing

    Technical Data:
    - Drive type: Flexible shaft drive, straight grinder
    - Application recommendation: For easy replacement of the sanding sleeves, pull them on and off with a slight clockwise rotation. Keep the abrasive sleeve holder clamped in the tool drive. For a secure fit of the abrasive sleeve, maintain the minimum speed of the abrasive sleeve carrier. For best performance, use at a recommended cutting speed of 20-30 m/s. Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools.
    - Machinable materials: Aluminium, steels up to 1,200 N/mm² ( 54 HRC, cobalt-based alloys
    - Machining tasks: Edge processing, fine grinding in stages, levelling, roughening, sharpening, surface processing, deburring, weld seam processing
    - Ordering information: Please order abrasive sleeve holder separately.
    - Ø inside: 60mm
    - RPM, opt., up to: 9500RPM
    - RPM, opt., from: 6500RPM
    - Safety instructions: The maximum permissible peripheral speed is 30 m/s. For safety reasons, the specified maximum permissible speed must never be exceeded. Do not allow the abrasive sleeves to protrude beyond the abrasive sleeve carrier.
    - Advantages: Outstanding service life thanks to special manufacturing process - even under the toughest operating conditions. Maximum efficiency thanks to particularly high material removal and high abrasive aggressiveness. Secure fit of the abrasive sleeve on the abrasive sleeve backing due to expansion of the backing during use.
    - Grit size: 40
    - Max. speed: 9500 min-¹
    - Width: 30 mm
    - Material suitability INOX: very suitable
    - Material suitability aluminium: very suitable
    - Material suitability steel: very suitable
    - Material: Aluminium oxide A
    - Ø: 60 mm
    - Brand: PFERD For commercial use, please observe the building regulations!

    For commercial use, please observe the building regulations!

    Read more

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    Recently Viewed

    Top questions at a glance

    How can I pay for my order?

    We offer a wide range of secure payment methods:

    online payment methods

    PayPal, KLARNA, Google Pay, Apple Pay and Shop Pay.

    Credit cards

    You can also pay with the major credit cards VISA, MasterCard and American Express. In this case, the payment is secured using the 3D-Secure method. If we have any reason to suspect fraudulent ordering, we will automatically cancel the payment.

    How can I pay for my order?
    How do I receive an invoice?

    You will automatically receive the invoice from our shipping partner in a separate email after receipt of payment. It will not come with the confirmation of receipt. In addition, a paper invoice will be enclosed with the order.

    Therefore, please also check your spam folder again thoroughly and otherwise get in touch here in our invoice portal.

    How do I receive an invoice?
    Returns: I want to return something

    If you wish to return all or part of your order and you're from the EU 🇪🇺, please check our returns portal.

    For returns from Switzerland 🇨🇭 and Liechtenstein 🇱🇮, use this returns portal.

    Where is my order?

    There are various ways to track the shipment status:

    The dispatch usually takes 1 - 2 working days. If it takes longer or you think the parcel has disappeared, please contact us here in our problem portal.

    Your tool family

    • <strong>Personalized support</strong>

      Personalized support

      Unlike many other platforms, we offer you personal advice and service that supports you at all times.

    • <strong></strong>

    • <strong>Best Prices</strong>

      Best Prices

      For each item with this symbol, you will currently receive the best online price (for the german market) from us. You can find the exact information on this on the product pages.

    This is Toolbrothers

    Tools are the engine of our society. Whether you're building a house, bought an IKEA cabinet or finally want to fix that leaky faucet, you need tools. We provide you with tools – and in true Toolbrothers style.
    • Super fast
    • Reliable
    • With the best service

    Log in

    Forgot your password?

    Don't have an account yet?
    Create account