Scope of Delivery:
- 1x PFERD round brush Ø 20 mm wire thickness 0.2 mm
Product Description:
for cleaning, derusting, smoothing, cleaning weld seams, light deburring and removing corrosion and paint - very good corrosion resistance with optimum service life - INOX trim blue for use on all stainless steels (INOX), such as V4A. Stainless steel wire (INOX) withstands temperatures up to 450 °C - Shank Ø 6 mm
Technical Data:
- Drive type: Flexible shaft drive, drill, straight grinder
- Application recommendation: For best performance, use a tool drive with at least 300 watts. Please observe the recommended speeds.
- Mounting system: Shank
- Machinable materials: Soft titanium alloys (tensile strength 500 N/mm²), stainless steel (INOX), titanium alloys, other non-ferrous metals, high-temperature resistant materials, nickel or titanium-based superalloys, nickel-based alloys (e.g. Inconell and Hasteloy), aluminium, bronze, cobalt-based alloys, hard non-ferrous metal, titanium
- Machining tasks: Removing oxide layers, paint stripping, removing tarnish, rust removal, deburring, cleaning, roughening
- Filament material: Stainless steel wire (INOX)
- Length, filament: 3mm
- Ø fill material: 0.2mm
- Ø shank: 6mm
- RPM, opt., up to: 13000RPM
- RPM, opt., from: 8000RPM
- Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm.
- Packaging: Industrial packaging
- Advantages: Produces fine surfaces. Optimum adaptation to the contour of the workpieces thanks to high flexibility. Very good corrosion resistance.
- RPM, max.: 20000RPM
- Ø: 20 mm
- Fill width: 4 mm
- Fill length: 37 mm
- Wire thickness: 0.2 mm
- Material suitability INOX: very suitable
- Brand: PFERD
- Material: Stainless steel
- Shank Ø: 6 mm
- Material suitability lacquer: very suitablePlease observe the building regulations for commercial use!
For commercial use, please observe the building regulations!
