Scope of Delivery:
- 1x PFERD grinding disc D125xSmm
Product Description:
for steel and stainless steel (INOX) with high grinding efficiency and maximum service life - bore 22.23 mm Ø
Technical Data:
- Drive type: Angle grinder
- Recommendation for use: Trim the CC-GRIND-ROBUST on sharp metal edges, files or with indexable inserts. Trimming may only be carried out at an angle of 45°. Select the CC-GRIND-ROBUST SGP STEELOX if the fastest possible work progress is required. For optimum performance, use with a flat angle of attack. Only use with the surface, not suitable for peripheral grinding. Apply the tool carefully and increase the pressure until a chip is created. Hold the pressure until the tool has been brought to the desired dimension.
- Machinable materials: Steel, stainless steel (INOX)
- Machining tasks: Weld seam processing, surface grinding, fine grinding in stages, deburring, chamfering
- Mould: CC-GRIND-ROBUST
- Note: PFERDERGONOMICS recommends CC-GRIND-ROBUST with VICTOGRAIN abrasive grain in order to sustainably reduce the vibration, noise and dust generated during use and to noticeably improve working comfort. PFERDEFFICIENCY recommends CC-GRIND-ROBUST with VICTOGRAIN abrasive grain for long, fatigue-free and resource-saving work with perfect results in the shortest possible time.
- Ø bore: 22.23 mm
- Abrasive: VICTOGRAIN
- Advantages: The tool can be reset/trimmed without any problems. Ultimate aggressiveness for the fastest work progress. Glass fibre reinforced plastic backing plate guarantees equally robust and safe use. Much more ergonomic than a grinding disc: noise, vibrations and dust are significantly reduced. A significantly better surface finish is also achieved. Compared to flap discs, flat surfaces can be achieved thanks to the dimensional stability. Thanks to the customised geometry, the use of a special clamping flange set is not necessary. Although the VICTOGRAIN tools only have one abrasive grain layer, they offer an outstanding tool life - longer than roughing discs and many flap discs. Unlike fibre discs, the CC-GRIND-ROBUST does not deform even under extreme climatic conditions and is significantly more robust in rough use.
- Ø: 125 mm
- Max. speed: 12200 min-¹
- Material suitability INOX: very suitable
- Bore: 22.23 mm
- Material suitability steel: very suitable
- Design: Steel / stainless steel
- Brand: PFERD For commercial use, please observe the building regulations!
For commercial use, please observe the building regulations!
