Only this week: 10% off all BOSCH power tools - discount will be deducted in the shopping cart

Description

SKU: 138706
EAN: 4007220659311

Scope of Delivery:
- 1x PFERD brush Ø 10 mm wire thickness 0.5 mm

Product Description:
flexible single-knot brush with plastic-coated brush body - very good corrosion resistance with optimum service life - INOX trim blue for use on all stainless steels (INOX) - such as V4A. Stainless steel wire (INOX) withstands temperatures up to 450 °C - Shaft Ø 6 mm

Technical Data:
- Drive type: Straight grinder, drilling machine, flexible shaft drive
- Application recommendation: For optimum results, use on variable-speed tool drives. For best performance, use a tool drive with at least 300 watts. Please observe the recommended speeds.
- Machinable materials: Non-ferrous metal hard, stainless steel (INOX), titanium, titanium alloys, other non-ferrous metals, soft titanium alloys (tensile strength 500 N/mm²), high-temperature resistant materials, nickel or titanium-based superalloys, cobalt-based alloys, bronze, aluminium, nickel-based alloys (e.g. Inconell and Hasteloy)
- Machining tasks: Rust removal, deburring, cleaning, weld seam processing, root seam processing, descaling, tarnish removal, oxide layer removal, fillet weld processing, paint stripping
- Trimming material: Stainless steel wire (INOX)
- Ø shank: 6mm
- Ø cup: 10mm
- RPM, opt., up to: 6500RPM
- RPM, opt., from: 4000RPM
- Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm.
- Packaging: Industrial packaging
- Advantages: The plastic coating prevents the risk of contact corrosion. Very good corrosion resistance. Optimum access to hard-to-reach areas such as inside corners, as the plait does not untwist. The brush is degreased and leaves no oil residue on the workpiece.
- Ø: 10 mm
- Fill width: 0.5 mm
- Filament length: 25 mm
- Wire thickness: 0.5 mm
- Total length: 65 mm
- Max. speed: 10000 min-¹
- Content: 10 pcs.
- Material suitability INOX: very suitable
- Material suitability aluminium: very suitable
- Brand: PFERD
- Material: Stainless steel
- Shank Ø: 6 mmFor commercial use, please observe the building regulations!

For commercial use, please observe the building regulations!

Read more

Product form

PFERD brush PBGS INOX ( 8000432691 ) Ø 10 mm wire thickness 0.5 mm 10000 min-¹

  • Vendor PFERD
  • condition  New
  • Unzufrieden? 100 Tage kostenfreie Retoure

Information on importing to Switzerland! 🇨🇭🇱🇮 We take care of customs clearance. You will receive your package as normal within the delivery time and you don't have to worry about anything. Your invoice includes Swiss VAT. Placing an order with us feels like a normal domestic order for you. The same goes for returns!

CHF 13.59
incl. VAT, plus shipping

As a member you will receive [points_amount]

    • American Express
    • Apple Pay
    • Google Pay
    • PayPal
    • Visa
    • Klarna
    • Mastercard

    Smarte Produktberatung

     
    • Responsible Person for the EU (GPSR) EU-based economic operator that ensures the product complies with the necessary regulations.
      • August Rüggeberg GmbH&Co. KG Pferd - Werkzeuge
      • Hauptstr. 13
      • 51709 Marienheide
      • Germany
      • +49226490
      • info@pferd.com

    Description

    SKU: 138706
    EAN: 4007220659311

    Scope of Delivery:
    - 1x PFERD brush Ø 10 mm wire thickness 0.5 mm

    Product Description:
    flexible single-knot brush with plastic-coated brush body - very good corrosion resistance with optimum service life - INOX trim blue for use on all stainless steels (INOX) - such as V4A. Stainless steel wire (INOX) withstands temperatures up to 450 °C - Shaft Ø 6 mm

    Technical Data:
    - Drive type: Straight grinder, drilling machine, flexible shaft drive
    - Application recommendation: For optimum results, use on variable-speed tool drives. For best performance, use a tool drive with at least 300 watts. Please observe the recommended speeds.
    - Machinable materials: Non-ferrous metal hard, stainless steel (INOX), titanium, titanium alloys, other non-ferrous metals, soft titanium alloys (tensile strength 500 N/mm²), high-temperature resistant materials, nickel or titanium-based superalloys, cobalt-based alloys, bronze, aluminium, nickel-based alloys (e.g. Inconell and Hasteloy)
    - Machining tasks: Rust removal, deburring, cleaning, weld seam processing, root seam processing, descaling, tarnish removal, oxide layer removal, fillet weld processing, paint stripping
    - Trimming material: Stainless steel wire (INOX)
    - Ø shank: 6mm
    - Ø cup: 10mm
    - RPM, opt., up to: 6500RPM
    - RPM, opt., from: 4000RPM
    - Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm.
    - Packaging: Industrial packaging
    - Advantages: The plastic coating prevents the risk of contact corrosion. Very good corrosion resistance. Optimum access to hard-to-reach areas such as inside corners, as the plait does not untwist. The brush is degreased and leaves no oil residue on the workpiece.
    - Ø: 10 mm
    - Fill width: 0.5 mm
    - Filament length: 25 mm
    - Wire thickness: 0.5 mm
    - Total length: 65 mm
    - Max. speed: 10000 min-¹
    - Content: 10 pcs.
    - Material suitability INOX: very suitable
    - Material suitability aluminium: very suitable
    - Brand: PFERD
    - Material: Stainless steel
    - Shank Ø: 6 mmFor commercial use, please observe the building regulations!

    For commercial use, please observe the building regulations!

    Read more

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    Recently Viewed

    Top questions at a glance

    How can I pay for my order?

    We offer a wide range of secure payment methods:

    online payment methods

    PayPal, KLARNA, Google Pay, Apple Pay and Shop Pay.

    Credit cards

    You can also pay with the major credit cards VISA, MasterCard and American Express. In this case, the payment is secured using the 3D-Secure method. If we have any reason to suspect fraudulent ordering, we will automatically cancel the payment.

    How can I pay for my order?
    How do I receive an invoice?

    You will automatically receive the invoice from our shipping partner in a separate email after receipt of payment. It will not come with the confirmation of receipt. In addition, a paper invoice will be enclosed with the order.

    Therefore, please also check your spam folder again thoroughly and otherwise get in touch here in our invoice portal.

    How do I receive an invoice?
    Returns: I want to return something

    If you wish to return all or part of your order and you're from the EU 🇪🇺, please check our returns portal.

    For returns from Switzerland 🇨🇭 and Liechtenstein 🇱🇮, use this returns portal.

    Where is my order?

    There are various ways to track the shipment status:

    The dispatch usually takes 1 - 2 working days. If it takes longer or you think the parcel has disappeared, please contact us here in our problem portal.

    Your tool family

    • <strong>Personalized support</strong>

      Personalized support

      Unlike many other platforms, we offer you personal advice and service that supports you at all times.

    • <strong></strong>

    • <strong>Best Prices</strong>

      Best Prices

      For each item with this symbol, you will currently receive the best online price (for the german market) from us. You can find the exact information on this on the product pages.

    This is Toolbrothers

    Tools are the engine of our society. Whether you're building a house, bought an IKEA cabinet or finally want to fix that leaky faucet, you need tools. We provide you with tools – and in true Toolbrothers style.
    • Super fast
    • Reliable
    • With the best service

    Log in

    Forgot your password?

    Don't have an account yet?
    Create account