Wera
-
Wera WERA combination spanner Joker spanner width across flats 10 mm length 159 mm ( 4000821466 )
Wed, 11/12/2025
Scope of Delivery: - Combination spanner Joker Width across flats 10 mm Length 159 mm Product Description: with holding function on the jaw side - made of alloyed tool steel - matt chrome-plated - with "Take it easy" tool finder - Its plus on the jaw side: - holding function for nuts thanks to a metal plate in the jaw - no slipping thanks to end stop - small swivel angle of only 30° Its plus on the ring side: fine toothing with 80 teeth Technical Data: - Material: alloyed tool steelFor commercial use, please observe the building regulations!
CHF 24.51
-
Wera WERA through hole ratchet 8002 C Koloss All Inclusive Set 1/2 ″ 30 teeth ( 4000821452 )
Wed, 11/12/2025
Scope of Delivery: - Through ratchet 8002 C Koloss All Inclusive Set 1/2 ″ 30 teeth - Ratchet, extension (length 341 mm), belt holder, protective pad, unlocking tool (for spare protective pads see art. no. 4000 821 449 Expanding mandrel see art. no. 4000 821 448) Supplied without socket spanner insert Product Description: with full hammer function - 12.5 mm (1/2 ″) square drive with through square for right and left-hand tightening - with ball lock - can be loaded up to at least 600 Nm - drop-forged hammer head, positive-locking pinned - multi-component Kraftform handle - holder for an extension (included in the scope of delivery) or an expanding mandrel (expanding mandrel = special accessory - please order separately, Art.No. 4000 821 448) Reverse swivel angle 6° 30 teeth with double pawl teeth Technical Data: - nanFor commercial use, please observe the building regulations!
CHF 118.62
-
Wera WERA screwdriver set 160 iS/7 7-piece ( 4000828618 )
Wed, 11/12/2025
Scope of Delivery: - Screwdriver set 160 iS/7 7-piece set - Contents: 1 screwdriver each for slotted screws 3.5 x 100 / 4.0 x 100 / 5.5 x 125 mm 1 screwdriver each for screws with cross recess (PH) size 1 x 80 / 2 x 100 mm 1 screwdriver for screws with plus-minus profile (PZD/slotted) size 2 x 100 mm 1 voltage tester 3.0 x 70 mm Supplied complete with wall bracket Product Description: with multi-component power moulded handles with roll-off protection - VDE-insulated up to 1000 V - manufactured according to IEC 60900, piece-tested - blades made of alloy tool steel - with reduced blade diameter and integrated protective insulation (particularly suitable for deep-set screws and spring elements) - size guide system - Take it easy Tool Finder System Technical Data: - Handle: 2-component handle - Design: extra slim - Packaging: cardboard boxFor commercial use, please observe the building regulations!
CHF 45.50
-
Wera WERA screwdriver 165 iS size PZD 2 ( 4000828597 )
Wed, 11/12/2025
Scope of Delivery: - Screwdriver 165 iS size PZD 2 Product Description: with multi-component power moulded handle with roll-off protection - VDE-insulated up to 1000 V - manufactured in accordance with DIN EN/IEC 60900, piece-tested - alloy tool steel blade - size guide system - Take it easy Tool Finder system for screws with cross recess (PZD) - version = EXTRA-SLIM (reduced blade diameter with integrated protective insulation for low-lying screw and spring elements) Technical Data: - Labelling: VDE insulatedFor commercial use, please observe the building regulations!
CHF 21.85
-
Wera WERA screwdriver 165 iS size PZD 1 ( 4000828596 )
Wed, 11/12/2025
Scope of Delivery: - Screwdriver 165 iS size PZD 1 Product Description: with multi-component power moulded handle with roll-off protection - VDE-insulated up to 1000 V - manufactured in accordance with DIN EN/IEC 60900, piece-tested - alloy tool steel blade - size guide system - Take it easy Tool Finder system for screws with cross recess (PZD) - version = EXTRA-SLIM (reduced blade diameter with integrated protective insulation for low-lying screw and spring elements) Technical Data: - Labelling: VDE insulatedFor commercial use, please observe the building regulations!
CHF 17.37
-
Wera WERA screwdriver 160 iS cutting edge width 5.5 mm ( 4000828536 )
Wed, 11/12/2025
Scope of Delivery: - Screwdriver 160 iS Cutting edge width 5.5 mm Product Description: with multi-component power moulded handle with roll-off protection - VDE-insulated up to 1000 V - manufactured in accordance with IEC 60900, piece-tested - alloy tool steel blade - size guide system - Take it easy Tool Finder system for slotted screws - version = EXTRA-SLIM (reduced blade diameter with integrated protective insulation for low-lying screw and spring elements) Technical Data: - Labelling: VDE insulatedFor commercial use, please observe the building regulations!
CHF 17.01
-
Wera WERA screwdriver 160 iS cutting edge width 4 mm ( 4000828534 )
Wed, 11/12/2025
Scope of Delivery: - Screwdriver 160 iS Cutting edge width 4 mm Product Description: with multi-component power moulded handle with roll-off protection - VDE-insulated up to 1000 V - manufactured in accordance with IEC 60900, piece-tested - alloy tool steel blade - size guide system - Take it easy Tool Finder system for slotted screws - version = EXTRA-SLIM (reduced blade diameter with integrated protective insulation for low-lying screw and spring elements) Technical Data: - Labelling: VDE insulatedFor commercial use, please observe the building regulations!
CHF 15.82
-
Wera WERA screwdriver 160 iS cutting edge width 3.5 mm ( 4000828533 )
Wed, 11/12/2025
Scope of Delivery: - Screwdriver 160 iS Cutting edge width 3.5 mm Product Description: with multi-component power moulded handle with roll-off protection - VDE-insulated up to 1000 V - manufactured in accordance with IEC 60900, piece-tested - alloy tool steel blade - size guide system - Take it easy Tool Finder system for slotted screws - version = EXTRA-SLIM (reduced blade diameter with integrated protective insulation for low-lying screw and spring elements) Technical Data: - Labelling: VDE insulatedFor commercial use, please observe the building regulations!
CHF 14.48
-
Wera WERA bit holder 897/4 IMP R for 1/4 ″ bits C 6.3 length 75 mm ( 4000829040 )
Wed, 11/12/2025
Scope of Delivery: - Bit holder 897/4 IMP R for 1/4 ″ bits C 6.3 length 75 mm Product Description: with ring magnet - for the toughest screwdriving conditions and impact screwdriving machines - for cushioning extreme impulse peaks - with ring magnet for easy holding of long and heavy screws - the ring magnet can be pushed back if required and thus switched off - with snap ring and magnet Drive: suitable for bits 6.3 mm (1/4″) external hexagon drive to DIN ISO 1173-C 6.3 Output: 6.3 mm (1/4″) hexagon suitable for screwdriving machines with DIN 1173-F 6.3 mount Technical Data: - nanFor commercial use, please observe the building regulations!
CHF 27.07
-
Wera WERA bit assortment Bit-Check 6 Impactor 1 6-piece ( 4000829044 )
Wed, 11/12/2025
Scope of Delivery: - Bit assortment Bit-Check 6 Impactor 1 6-piece set - Supplied in plastic box Product Description: with IMPAKTOR technology for the toughest screwing conditions and impact screwdrivers - diamond-coated bits - Take it easy Tool Finder System Contents: 1 bit each for screws with Phillips head (PH) size 2 / 3* 1 bit each for screws with Phillips head (PZD) size 2 / 3* 1 bit each for screws with internal TORX® profile size T 25 / T30* *= bit length 50 mm each Technical Data: - Delivery: in plastic boxFor commercial use, please observe the building regulations!
CHF 27.64
-
Wera WERA KK 27 RA 1 7-piece magazine bit holder ( 4000829597 )
Wed, 11/12/2025
Scope of Delivery: - KK 27 RA 1 7-piece magazine bit holder - 1 magazine holder 1 bit each for slotted screws tough-hard 5.5 x 1.0 / 6.5 x 1.2 mm 1 bit each for screws with cross recess (PH) tough-hard size 1 / 2* 1 bit each for screws with cross recess (PZD) tough-hard size 1 / 2* *25 mm long Product Description: with ratchet function, integrated magazine, magnetic bit holder and multi-component power moulded handle - ratchet switchable (right/fixed/left) suitable for bits with 6.3 mm (1/4") external hex drive C 6.3 - maximum torque up to 50 N.m - hexagonal blade Technical Data: - Length: 230mm - suitable for: Bits 6.3 mm (1/4 ") DIN ISO 1173-C 6.3For commercial use, please observe the building regulations!
CHF 47.62
-
Wera WERA KK Zyklop Speed 26-piece bit/socket spanner set ( 4000820579 )
Wed, 11/12/2025
Scope of Delivery: - KK Zyklop Speed 26-piece bit/socket spanner set - Supplied in folding case Product Description: Socket spanner sockets and fine-toothed Zyklop ratchet with 6.3 mm 1/4" square drive - Socket spanner sockets made of alloyed tool steel - Matt chrome-plated with external knurling, suitable for manual and machine use (conventional cordless screwdriver) - Nut locking function - Bits with direct connection for cordless screwdrivers (E 6.3) Special product benefits of the ratchet: - swivelling ratchet head with fixed locking positions - can also be used as a screwdriver in the 0 degree position - multi-component power moulded handle Contents: 1 Zyklop swivel and reversible ratchet 6.3 mm (1/4") with quick-release sleeve 1 hexagon socket spanner bit SW 5.5 / 6 / 7 / 8 / 10 / 12 / 13 mm each 1 extension 150 mm with quick-release sleeve 1 bit for slotted screws size 5.5 mm* 1 bit each for screws with cross recess (PH) size 1 / 2 / 3* 1 bit each for screws with cross recess (PZD) size 1 / 2* 1 bit each for screws with internal TORX® profile size T 10 / 15 / 20 / 25 mm T 10 / 15 / 20 / 25 / 27 / 30* 1 bit each for hexagon socket screws size 3 / 4 / 5 / 6 mm* 1 adapter 6.3 mm (1/4") square drive to 6.3 mm (1/4") hexagon drive for driving bits with a ratchet * 50 mm long Technical Data: - nanFor commercial use, please observe the building regulations!
CHF 101.13
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"