Sensen

Scope of Delivery: - 1x Makita brush cutter / scythe attachment EM 404 MP ( 198768-1 ) for DUX 60 cordless multifunction drive Product Description: The Makita EM 404 MP scythe attachment for the Makita DUX 60 Z 2x 18V ( 36V ) is the perfect attachment for cutting grass, weeds, undergrowth and low vegetation in conjunction with an approved drive unit. All insert tools on the Makita DUX 60 Z can be changed completely without tools. Two 18 volt batteries (not included) provide the tool with an extremely high level of power. It is recommended to always use two of the same batteries. Makita has equipped the DUX 60 multifunctional drive with the latest technology, so it is optimally protected against dust and splash water with Xtreme Protect Technology ( XTP ). The powerful motor has Active Feedback sensing technology, which stops the device immediately if it jams. The Makita brush cutter / scythe attachment is the perfect solution for efficient and effortless cutting of grass, weeds etc., even in hard-to-reach corners. This attachment is only approved for use with the following appliances: EX2650 LH, DUX60. Technical Data: - Dimensions: Length x width x height ( without cutting tool ) 876 mm x 392 mm x 225mm - Net weight: 1.5 kg - Cutting diameter: metal blade 230 mm, nylon thread head 420 mm - Gear ratio: 13:21 - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita 2-thread head Tap&Go 2.4 mm Product Description: The Makita 2-thread head is an accessory for the Makita EBH341U, EM4350, EM4351U, EM2651LH scythes. The thread head is designed for 2.4 mm thick threads. The pre-wound string is made of high-quality, tear-resistant plastic and is easy to replace. The thin and flexible threads allow you to cut precisely along house walls, walls, wooden fences or similar without damaging them. Makita has a long tradition of supplying tools of all kinds and also has a large 18 volt battery system with over 300 compatible devices. Technical Data: - Manufacturer: Makita - Manufacturer's description: 2-thread head Tap&Go - Manufacturer number: 191D93-3 - Suitable for: EBH341U, EM4350, EM4351U, EM2651LH - Tool holder: M10 x 1.25 LH - Diameter: 130 mm - Thread diameter: 2.4 mm - Thread length: 4 m - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita EM 408 MP brush cutter / scythe attachment Product Description: The Makita EM 408 MP scythe attachment is the ideal addition for versatile mowing work and impresses with its flexible application options. Thanks to the split protective cover, it can be used with a plastic cutter head (Ø 255 mm), a metal cutting blade (Ø 230 mm) or a string head (Ø 300 mm). This makes the attachment perfect for various cutting tasks - from fine lawn edges to dense undergrowth. The scope of delivery includes a 2-thread Tap&Go 2.0 mm head, which enables quick tracking of the thread by lightly tapping it on the ground, as well as a 17 mm socket spanner for easy installation. Technical Data: - Manufacturer: Makita - Manufacturer's description: EM 408 MP - Manufacturer number: 191N31-5 - Cutting width: 300 mm - Product dimensions (L x W x H): 920 x 320 x 196 mm - Tool holder: M10 x 1.25 LH - Idle speed (with DUX18): 0-5000 / 7100 min-¹ - Idle speed (with DUX60): 0-4200 / 6000 / 7100 min-¹ - Idle speed (with UX01G): 0-4200 / 6000 / 7100 min-¹ - Product weight: 1.4 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x MARCRIST can countersink centring drill Ø 10 mm working length 65 mm Product Description: Centre drill 120 x 10 mm Technical Data: - Total length: 120mm - Type: soldered - Ø: 10 mm - Working length: 65 mm - Brand: MARCRISTPlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x MARCRIST can countersink adapter SDS Ø 25 mm Product Description: Adapter SDS to M16 Technical Data: - Total length: 116.5mm - Ø: 25 mm - Brand: MARCRISTPlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x MARCRIST can countersink Ø 82 mm working length 62 mm Product Description: Universal - with suction holes, concentricity-optimised tube, suitable for drilling brick, sandstone, concrete. Poroton, pumice Technical Data: - Total length: 90mm - Type: soldered - Ø: 82 mm - Working length: 62 mm - Brand: MARCRISTPlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - Nail bar set Power Bar total length 350 / 600 / 900 mm Product Description: oval shape with reinforced section at the point where the force is applied - 60% greater linear leverage - easy nail extraction Technical Data: - Contents: 3-piece - Surface: black - Total length: 350 / 600 / 900mmFor commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - Scythe whetstone L230xW40xH15mm Silicon carbide Product Description: Silicon carbide - oval - for hand sharpening in the garden and household Technical Data: - Design: oval shapeFor commercial use, please observe the building regulations!

Read more less