Pullers
-
Gedore GEDORE extension 2088 1/4 ″ length 150 mm ( 4000824392 )
Thu, 09/11/2025
Scope of Delivery: - Extension 2088 1/4 ″ Length 150 mm Product Description: flexible - 6.3 mm (1/4″) square drive - chrome vanadium steel - chrome-plated Technical Data: - Surface: chrome-plated - Material: Vanadium steelFor commercial use, please observe the building regulations!
CHF 21.18
-
KUKKO KUKKO separator 15 opening A 30 - 250 mm ( 4157490015 )
Scope of Delivery: - Separator 15 Opening A 30 - 250 mm Product Description: Application: for extracting ball bearings, roller bearings, inner rings and other flush-fitting parts - the sharp cutting edges enable flush-fitting parts to be extracted where 2- and 3-arm extractors cannot be used (Fig. 1) - the jaws are clamped by evenly pulling the nuts onto the side bolts Working method: pulling is performed by tightening the spindle against the shaft end (Fig. 2 and 3), hydraulic operation is also possible with the larger pullers Working method with hydraulics (Fig. 4): (hydraulics are not included in the scope of delivery) use the spanner (b) to screw the spindle of the hydraulics into the thread of the crossbar of the puller - until the pressure piece presses firmly against the shaft, then activate the hydraulics by turning the upper spindle (a) - Attention: Figures 2 and 3 show the separator in combination with the puller Art.No. 4157 490 000, 4157 490 001, 4157 490 002, 4157 490 003 (not included in the scope of delivery) Figure 4 shows the separator in combination with the puller Art. no. 4157 490 000, 4157 490 001, 4157 490 002, 4157 490 003 and a hydraulic spindle (puller and hydraulic spindle are not included in the scope of delivery) Please request the hydraulic spindle separately. Technical Data: - Weight: 20.05 kgFor commercial use, please observe the building regulations!
-
KUKKO KUKKO separator 15 opening A 22 - 115 mm ( 4157490012 )
Thu, 09/11/2025
Scope of Delivery: - Separator 15 Opening A 22 - 115 mm Product Description: Application: for extracting ball bearings, roller bearings, inner rings and other flush-fitting parts - the sharp cutting edges enable flush-fitting parts to be extracted where 2- and 3-arm extractors cannot be used (Fig. 1) - the jaws are clamped by evenly pulling the nuts onto the side bolts Working method: pulling is performed by tightening the spindle against the shaft end (Fig. 2 and 3), hydraulic operation is also possible with the larger pullers Working method with hydraulics (Fig. 4): (hydraulics are not included in the scope of delivery) use the spanner (b) to screw the spindle of the hydraulics into the thread of the crossbar of the puller - until the pressure piece presses firmly against the shaft, then activate the hydraulics by turning the upper spindle (a) - Attention: Figures 2 and 3 show the separator in combination with the puller Art.No. 4157 490 000, 4157 490 001, 4157 490 002, 4157 490 003 (not included in the scope of delivery) Figure 4 shows the separator in combination with the puller Art. no. 4157 490 000, 4157 490 001, 4157 490 002, 4157 490 003 and a hydraulic spindle (puller and hydraulic spindle are not included in the scope of delivery) Please request the hydraulic spindle separately. Technical Data: - Weight: 2.9 kgFor commercial use, please observe the building regulations!
CHF 130.20
-
KUKKO KUKKO separating device 17 opening A 8 - 60 mm ( 4000821860 )
Scope of Delivery: - Separating device 17 Opening A 8 - 60 mm Product Description: Quick-clamping pressure spindle - Quality tool steel - Handy design, as the separating jaws are clamped quickly and centrically by a pressure spindle - Application: for removing ball bearings, roller bearings, inner rings and other flush-fitting parts, especially for automotive, agricultural and industrial mechanics Technical Data: - Weight: 0.95 kgFor commercial use, please observe the building regulations!
-
KUKKO KUKKO separator 17 opening A 22 - 115 mm ( 4000821862 )
Thu, 09/11/2025
Scope of Delivery: - Separator 17 Opening A 22 - 115 mm Product Description: Quick-clamping pressure spindle - Quality tool steel - Handy design, as the separating jaws are clamped quickly and centrically by a pressure spindle - Application: for removing ball bearings, roller bearings, inner rings and other flush-fitting parts, especially for automotive, agricultural and industrial mechanics Technical Data: - Weight: 3.72kgFor commercial use, please observe the building regulations!
CHF 181.57
-
KUKKO KUKKO internal extractor 21-4 for holes Ø 20-30 mm ( 4000821893 )
Thu, 09/11/2025
Scope of Delivery: - Internal extractor 21-4 for holes Ø 20-30 mm Product Description: for extracting ball bearings, ball bearing outer rings and bushes - made of special steel - even bearings sitting very close to the rear wall are gripped securely and tightened quickly thanks to the excellent clamping effect - Application: for extracting close-fitting ball bearings, ball bearing outer rings and bushes Technical Data: - Weight: 0.24kg - Material: special steelFor commercial use, please observe the building regulations!
CHF 62.83
-
KUKKO KUKKO internal extractor 21-1 for holes Ø 12-16 mm ( 4000821890 )
Thu, 09/11/2025
Scope of Delivery: - Internal extractor 21-1 for holes Ø 12-16 mm Product Description: for extracting ball bearings, ball bearing outer rings and bushes - made of special steel - even bearings sitting very close to the rear wall are gripped securely and tightened quickly thanks to the excellent clamping effect - Application: for extracting close-fitting ball bearings, ball bearing outer rings and bushes Technical Data: - Weight: 0.16kg - Material: special steelFor commercial use, please observe the building regulations!
CHF 62.83
-
KUKKO KUKKO puller 20-20 Clamping depth 150 mm ( 4000821849 )
Thu, 09/11/2025
Scope of Delivery: - Puller 20-20 Clamping depth 150 mm Product Description: two-armed - with sliding, always parallel puller hooks - special steel - with strong spindle for high pressure performance and crosshead with high bending strength - puller hooks with large contact surfaces for gentle pulling - optimum adaptation of the spindle to the shaft due to 2-sided spindle tip (ball and tip) by reversing the arms, the puller can also be used as an internal puller Application: universally applicable, for pulling ball bearings, bearings, gears, etc. - can also be used as an external and internal puller by reversing the arms. - can be used as an external and internal puller by reversing the puller hooks - also suitable for pulling asymmetrical workpieces Technical Data: - Weight: 3.22kg - Material: special steelFor commercial use, please observe the building regulations!
CHF 164.33
-
KUKKO KUKKO puller 20-10-SP Clamping depth 100 / 200 / 250 mm ( 4000821910 )
Thu, 09/11/2025
Scope of Delivery: - Puller 20-10-SP Clamping depth 100 / 200 / 250 mm - Supplied complete with three pairs of narrow-space pullers Product Description: two-armed - with extra slim puller hooks - for narrow spaces - for removing transmission gears, bearings, pinions, etc. Application: for extracting gearwheels, bearings, pinions and synchroniser bodies - can be used as an external and internal extractor by turning the extractor hooks - also suitable for extracting asymmetrical workpieces - optimum adaptation of the spindle to the shaft thanks to 2-sided spindle tip (ball and tip) - variable clamping depth thanks to extractor hooks in various lengths Technical Data: - Weight: 3.69kgFor commercial use, please observe the building regulations!
CHF 272.33
-
KUKKO KUKKO puller 110-3 Clamping depth 200 mm ( 4000821816 )
Thu, 09/11/2025
Scope of Delivery: - Puller 110-3 Clamping depth 200 mm Product Description: two-armed - puller hooks are straight throughout and equally slim - reversible hooks for external and internal pulling work - hooks are secured against falling out with a pin lock, the lock is released at the touch of a button to convert the hooks for internal or external pulling - interchangeable spindle tip from 110-1 onwards, the puller can also be used as an internal puller by repositioning the arms Technical Data: - Weight: 4.88kgFor commercial use, please observe the building regulations!
CHF 194.16
-
KUKKO KUKKO puller 110-1 Clamping depth 100 mm ( 4000821812 )
Thu, 09/11/2025
Scope of Delivery: - Puller 110-1 Clamping depth 100 mm Product Description: two-armed - puller hooks are straight throughout and equally slim - reversible hooks for external and internal pulling work - hooks are secured against falling out with a pin lock, the lock is released at the touch of a button to convert the hooks for internal or external pulling - interchangeable spindle tip from 110-1 onwards, the puller can also be used as an internal puller by repositioning the arms Technical Data: - Weight: 1.18kgFor commercial use, please observe the building regulations!
CHF 60.32
-
Gedore GEDORE extension 1990 A 1/2 ″ length 250 mm ( 4000821464 )
Scope of Delivery: - Extension 1990 A 1/2 ″ Length 250 mm Product Description: 12.5 mm (1/2") square drive - with trigger (safety lock) - for manually operated socket spanner sockets - chrome vanadium steel - chrome-plated - with ball lock - Special product benefits: Convenient access for screws located deep in the object, safety ring to prevent unintentional loosening of the socket spanner insert from the extension A ratchet with nut locking system, such as item no. 4000 821 574, 4000 821 581, 4000 821 578 or 4000 821 575, is recommended for driving the extensions Square drive to DIN 3120 / ISO 1174 Technical Data: - Surface: chrome-plated - Material: Vanadium steelFor commercial use, please observe the building regulations!
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"