Pullers
-
KS Tools KS TOOLS Universal-Abzieher 3-armig, 50-500mm, Haken 500mm ( 630.3608 )
Produktbeschreibung:Universal-Abzieher 3-armig, 50-500mm, Haken 500mm · Universal-Abzieher 3-armigMerkmale: Haken sind in der Spanntiefe verstellbar gleichmäßige Lastverteilung und zentriertes Anziehen Hydraulikspindel nachrüstbar für Gewinde G1/2" extrem robuste Spindel mit induktiv gehärtetem Gewinde Spezial-Werkzeugstahl Technische Daten: - Abziehhaken-Breite G: 30 mm - Abziehhaken-Gesamttiefe F: 48 mm - Abziehhaken-Spitzenhöhe D: 5 mm - Abziehhaken-Spitzentiefe E: 25 mm - Anzahl Abziehhaken: mit 3 Abziehhaken - Außensechskant-Antrieb in mm: 22 mm - Drehmoment max Nm: 220 Nm - Funktions-Attribut 1: Spanntiefe verstellbar - Gewicht [g]: 10000 g - Herstellernummer: 630.3608 - Material1: Spezial-Werkzeugstahl - max. Druckkraft KN: 120,0 - max. Druckkraft Nm: 220 - max. Druckkraft t: 12 - Schnellverstellung: nein - Spanntiefe B in mm: 500 mm - Spannweite A in mm: 50-500 mm - Spannweite bis [mm]: 500 mm - Spannweite von [mm]: 50 mm - Spindelgröße mm: G1/2"x14g x 270 - Variantenartikel : 630.3601
-
KUKKO KUKKO separator 15 opening A 12 - 75 mm ( 4157490011 )
Fri, 09/26/2025
Scope of Delivery: - Separator 15 Opening A 12 - 75 mm Product Description: Application: for extracting ball bearings, roller bearings, inner rings and other flush-fitting parts - the sharp cutting edges enable flush-fitting parts to be extracted where 2- and 3-arm extractors cannot be used (Fig. 1) - the jaws are clamped by evenly pulling the nuts onto the side bolts Working method: pulling is performed by tightening the spindle against the shaft end (Fig. 2 and 3), hydraulic operation is also possible with the larger pullers Working method with hydraulics (Fig. 4): (hydraulics are not included in the scope of delivery) use the spanner (b) to screw the spindle of the hydraulics into the thread of the crossbar of the puller - until the pressure piece presses firmly against the shaft, then activate the hydraulics by turning the upper spindle (a) - Attention: Figures 2 and 3 show the separator in combination with the puller Art.No. 4157 490 000, 4157 490 001, 4157 490 002, 4157 490 003 (not included in the scope of delivery) Figure 4 shows the separator in combination with the puller Art. no. 4157 490 000, 4157 490 001, 4157 490 002, 4157 490 003 and a hydraulic spindle (puller and hydraulic spindle are not included in the scope of delivery) Please request the hydraulic spindle separately. Technical Data: - Weight: 1.11 kgFor commercial use, please observe the building regulations!
CHF 86.42
-
KUKKO KUKKO internal extractor 21-2 for holes Ø 14-19 mm ( 4000821891 )
Fri, 09/26/2025
Scope of Delivery: - Internal extractor 21-2 for holes Ø 14-19 mm Product Description: for extracting ball bearings, ball bearing outer rings and bushes - made of special steel - even bearings sitting very close to the rear wall are gripped securely and tightened quickly thanks to the excellent clamping effect - Application: for extracting close-fitting ball bearings, ball bearing outer rings and bushes Technical Data: - Weight: 0.12kg - Material: special steelFor commercial use, please observe the building regulations!
CHF 62.80
-
KUKKO KUKKO extractor 18-2 nominal size 2 ( 4157490002 )
Scope of Delivery: - Puller 18-2 Nominal size 2 Product Description: To connect to the separator, the tension bolts are screwed into the threaded holes of the separator jaws Technical Data: - Weight: 3.25kgFor commercial use, please observe the building regulations!
-
Gedore GEDORE extension KB 3290 square drive 3/4 ″ ( 4000773672 )
Fri, 09/26/2025
Scope of Delivery: - Extension KB 3290 square drive 3/4 ″ Product Description: 20 mm (3/4 ″) square drive for power screwdriver bit to DIN 3121 - ISO 1174 - form F and H with pin hole and annular groove - special steel - manganese phosphated - for the toughest loads on electric and/or pneumatic impact wrenches Technical Data: - Material: special steel - suitable locking pin Ø x L: 4 x 35mm - matching circlip Ø: 36mmFor commercial use, please observe the building regulations!
CHF 74.05
-
Gedore GEDORE extension KB 3290 square drive 3/4 ″ ( 4000773671 )
Fri, 09/26/2025
Scope of Delivery: - Extension KB 3290 square drive 3/4 ″ Product Description: 20 mm (3/4 ″) square drive for power screwdriver bit to DIN 3121 - ISO 1174 - form F and H with pin hole and annular groove - special steel - manganese phosphated - for the toughest loads on electric and/or pneumatic impact wrenches Technical Data: - Material: special steel - suitable locking pin Ø x L: 4 x 35mm - matching circlip Ø: 36mmFor commercial use, please observe the building regulations!
CHF 57.50
-
Gedore GEDORE Extension 3090 3/8 ″ Length 250 mm ( 4000773591 )
Fri, 09/26/2025
Scope of Delivery: - Extension 3090 3/8 ″ Length 250 mm Product Description: 10.0 mm (3/8") square drive with ball lock - chrome vanadium steel - chrome-plated - DIN 3123 / ISO 3316 Square drive to DIN 3120 / ISO 1174 Technical Data: - Surface: chrome-plated - Material: Vanadium steelFor commercial use, please observe the building regulations!
CHF 21.17
-
Gedore GEDORE extension KB 3290 square drive 3/4 ″ ( 4000773670 )
Fri, 09/26/2025
Scope of Delivery: - Extension KB 3290 square drive 3/4 ″ Product Description: 20 mm (3/4 ″) square drive for power screwdriver bit to DIN 3121 - ISO 1174 - form F and H with pin hole and annular groove - special steel - manganese phosphated - for the toughest loads on electric and/or pneumatic impact wrenches Technical Data: - Material: special steel - suitable locking pin Ø x L: 4 x 35mm - matching circlip Ø: 36mmFor commercial use, please observe the building regulations!
CHF 47.44
-
Gedore GEDORE Extension 2190 1 ″ Length 400 mm ( 4000773547 )
Fri, 09/26/2025
Scope of Delivery: - Extension 2190 1 ″ Length 400 mm Product Description: 25 mm (1") square drive - for hand-operated socket spanner sockets with pin lock - chrome vanadium steel - chrome-plated - DIN 3123 / ISO 3316 square drive To DIN 3120 / ISO 1174 Technical Data: - Surface: chrome-plated - Material: Vanadium steelFor commercial use, please observe the building regulations!
CHF 78.26
-
Gedore GEDORE Extension 3090 3/8 ″ Length 75 mm ( 4000773587 )
Fri, 09/26/2025
Scope of Delivery: - Extension 3090 3/8 ″ Length 75 mm Product Description: 10.0 mm (3/8") square drive with ball lock - chrome vanadium steel - chrome-plated - DIN 3123 / ISO 3316 Square drive to DIN 3120 / ISO 1174 Technical Data: - Surface: chrome-plated - Material: Vanadium steelFor commercial use, please observe the building regulations!
CHF 16.76
-
Gedore GEDORE Extension 3090 3/8 ″ Length 125 mm ( 4000773588 )
Fri, 09/26/2025
Scope of Delivery: - Extension 3090 3/8 ″ Length 125 mm Product Description: 10.0 mm (3/8") square drive with ball lock - chrome vanadium steel - chrome-plated - DIN 3123 / ISO 3316 Square drive to DIN 3120 / ISO 1174 Technical Data: - Surface: chrome-plated - Material: Vanadium steelFor commercial use, please observe the building regulations!
CHF 16.95
-
Gedore GEDORE extension 2190 1 ″ Length 200 mm ( 4000773546 )
Fri, 09/26/2025
Scope of Delivery: - Extension 2190 1 ″ Length 200 mm Product Description: 25 mm (1") square drive - for hand-operated socket spanner sockets with pin lock - chrome vanadium steel - chrome-plated - DIN 3123 / ISO 3316 square drive To DIN 3120 / ISO 1174 Technical Data: - Surface: chrome-plated - Material: Vanadium steelFor commercial use, please observe the building regulations!
CHF 57.88
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"