Package contents:- 1x Rothenberger ROMAX 4000 18 V Li-Ion Electro-hydraulic Press Machine- 1x Case with fitting insert- 1x Battery CAS Cordless Alliance System Li-HD - 18V 4.0Ah- 1x Charger CAS Cordless Alliance System 18VProduct description:This ROMAX® 4000 of the manufacturer Rothenberger is a electro-hydraulic press machine for system-dependent pressing of fittings up to Ø 110 mm with 32 - 34 kN. It is equipped with a powerful battery technology, which allows an increase in pressings per single charge. Its low weight of only 3.6 kg and balanced weight distribution reduce fatigue and enable operating in a more ergonomic and effort-saving way even during continuous use. This press machine is equally furnished with a CFT® technology which guarantees constant thrust during each press cycle. The increased service interval of 40,000 pressings/ 2 years reduces down time and increases productivity. The ROTHENBERGER battery technology brings revolution to the ROTHENBERGER battery range. Thanks to the latest battery technology and an intelligent battery management between the battery and the machine, batteries have unprecedented endurance levels. These batteries also have LED lights which indicate the charging status.Technical specifications:Voltage: 18 VUnit dimensions: 59 x 38.4 x 14.3 cmWeight incl. case: 6.73 kgREACH-compliant: YesRoHS compliant: YesCountry of origin: GermanyGross weight: 7.2 kgWorking range diameter up to (MM): 110 mmWorking range diameter from (MM): 12 mm
Package contents:
- 1x Rothenberger ROMAX 4000 Electro-Hydraulic Cordless Press Machine 18 V Li-Ion
- 1x Carry case with insert
- 1x Battery Rothenberger RO BP18/4 Li-HD - 18V/4.0 Ah ( 1000002548 )
- without charger
Product description:
The ROMAX® 4000 is an electro-hydraulic cordless press machine from Rothenberger for pressing fittings up to 110 mm in diameter and from 32 to 34 kN depending on the system. By using more powerful battery technology, a higher compression per charge is possible. Its low weight of 3.6 kg and balanced weight distribution reduce fatigue and allow ergonomic and energy-saving work over a long period of time. The CFT® technology deployed ensures the required compression force during compression. The improved service interval of 40,000 press cycles / 2 years ensures high productivity. ROTHENBERGER battery technology stands for intelligent battery management. The batteries feature LED indicators indicating the charge status.
Technical specifications:
Voltage: 18 V
pressing force: 32-34 kN
Dimensions: 59 x 38.4 x 14.3 cm
Weight: 7.51 kg
UN number: UN3481
REACH Compliance: Yes
RoHS Compliance: Yes
Country of origin: Germany
Net weight: 7.2 kg
Diameter of the working range up to (MM): 110 mm
Diameter of the working area (MM): 12 mm
Package contents:
- 1x Rothenberger ROMAX 4000 Cordless Electro-Hydraulic Press Machine 18 V Li-Ion
- 1x Carry case with insert
- without battery, without charger
Product description:
The ROMAX® 4000 is an electro-hydraulic cordless press machine from Rothenberger for pressing fittings up to 110 mm in diameter and from 32 to 34 kN depending on the system. By using more powerful battery technology, a higher compression per charge is possible. Its low weight of 3.6 kg and balanced weight distribution reduce fatigue and allow ergonomic and energy-saving work over a long period of time. The CFT® technology deployed ensures the required compression force during compression. The improved service interval of 40,000 press cycles / 2 years ensures high productivity.
Technical specifications:
Voltage: 18 V
Dimensions: 59 x 38.4 x 14.3 cm
Weight incl. case: 6.73 kg
REACH Compliance: Yes
RoHS Compliance: Yes
Country of origin: Germany
Net weight: 7.2 kg
Diameter of the working area (MM): 12 mm
Diameter of the working area up to (MM): 110 mm
Package contents:
- 1x REMS Pressing Tong Standard M 15 ( 570110 )
Product description:
The Standard M15 pressing tongs from REMS are made of special forged and hardened stainless steel. The pressing contours of these REMS pressing tongs are system-specific and correspond to the pressing contours of the respective press machines, thus ensuring perfect, system-conform and safe pressing. These pressing tongs have a high-precision, accurately shaped and rounded pressing contour and therefore significantly lower manufacturing tolerances than the contours of cast tongs.
Technical specifications:
Diameter: 15 mm
Product weight : 1740 g
Product height : 45 mm
Product length : 145 mm
Product width: 95 mm
Country of origin: Germany
Scope of Delivery:
- 1x REMS pressing jaw pressing tongs M18 for pressing machine ACC ( 570120 )
Product Description:
The heavy-duty pressing tongs from REMS are made of forged and specially hardened special steel. The pressing contours of the REMS pressing tongs are system-specific and correspond to the pressing contours of the respective pressfitting systems. This ensures perfect, system-compliant and safe pressing. They have a high-precision machined and precisely rounded pressing contour and therefore significantly lower manufacturing tolerances than cast pressing contours.
Technical Data:
- Diameter: 18 mm
- Product weight: 1890 g
- Product height: 45 mm
- Product length: 145 mm
- Product width: 95 mm
- Country of origin: DE
- For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
Scope of Delivery:
- 1x REMS pressing jaw pressing tongs V15 for pressing machine ACC ( 570115 )
Product Description:
The heavy-duty pressing tongs from REMS are made of forged and specially hardened special steel. The pressing contours of the REMS pressing tongs are system-specific and correspond to the pressing contours of the respective pressfitting systems. This ensures perfect, system-compliant and safe pressing. They have a high-precision machined and precisely rounded pressing contour and therefore significantly lower manufacturing tolerances than cast pressing contours.
Technical Data:
- Diameter: 15 mm
- Product weight: 1740 g
- Product height: 40 mm
- Product length: 140 mm
- Product width: 100 mm
- Country of origin: DE
- For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
Scope of Delivery:
- 1x Rothenberger pressing jaw standard type SV18 ( 015213X )
Product Description:
The Rothenberger pressing jaws impress with their proven material and manufacturing quality, which is guaranteed by batch numbering and individual testing. They are suitable for system-compliant crimping of fittings made of plastic systems and metal. The 3-bolt synchronised mechanism allows the pressing jaws to be opened with one finger and ensures a high level of accuracy during pressing. The continuous bolt with no potential breaking points guarantees a long service life and a high level of safety at work. The standard pressing jaws are suitable for the ROMAX® 4000, ROMAX® 3000, ROMAX® 3000 AC and ROMAX® AC ECO.
Technical Data:
- Axial thrust: 32-34 kn
- Product weight: 1.905 kg
- Working range diameter (up to): 15 mm
- Pressing jaw for system-compliant pressing of fittings with: Ø 15 mm (metal)
- Product height: 3.9 cm
- For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
Package contents:
- 1x Rothenberger ROMAX 4000 Cordless Electro-Hydraulic Press Machine 18 V Li-Ion
- 1x Carry case with insert
- without battery, without charger
Product description:
The ROMAX® 4000 is an electro-hydraulic cordless press machine from Rothenberger for pressing fittings up to 110 mm in diameter and from 32 to 34 kN depending on the system. By using more powerful battery technology, a higher compression per charge is possible. Its low weight of 3.6 kg and balanced weight distribution reduce fatigue and allow ergonomic and energy-saving work over a long period of time. The CFT® technology deployed ensures the required compression force during compression. The improved service interval of 40,000 press cycles / 2 years ensures high productivity.
Technical specifications:
Voltage: 18 V
Dimensions: 59 x 38.4 x 14.3 cm
Weight incl. case: 6.73 kg
REACH Compliance: Yes
RoHS Compliance: Yes
Country of origin: Germany
Net weight: 7.2 kg
Diameter of the working area (MM): 12 mm
Diameter of the working area up to (MM): 110 mm
Scope of Delivery:
- 1x REMS Mini-Press ACC 22 V ( 578002R22 )
- 1x REMS Li-Ion battery with 21.6 V and 2.5 Ah ( 571571R22 )
- 1x REMS quick charger for Li-Ion batteries 230 V, 50 - 60 Hz, 70 W ( 571575R220 )
- 1x REMS L-Boxx 136 with matching system insert
- 1x operating instructions
- without crimping pliers
Product Description:
This cordless radial press from REMS is a universal, extremely handy power tool with forced drainage for producing press connections for all common pressfitting systems. The tool is suitable for press connections with a diameter of 10 to 40 mm. It is light, handy and fast. It presses in under 4 seconds. Thanks to its compact design, this radial press can be used anywhere: freehand, overhead and even in particularly tight spaces. The optimised weight distribution ensures that it can also be operated with one hand. The drive unit with crimping pliers (not included) can be placed on the battery within easy reach. The housing is ergonomically designed and has a soft grip. The crimping tool holder can be rotated through 360°. The automatic locking mechanism ensures that the crimping pliers are always secure. The crimping process takes place with ACC. The machine also has a thrust and pressing force of 22 kN and a thrust force of 22 kN. The electro-hydraulic drive is powerful with a high-torque battery motor with a power of 21.6 V/380 W. It also has a robust planetary gearbox and an eccentric piston pump.
Technical Data:
- Voltage: 22V
- Case dimensions (length x width x height): 440 x 370 x 140 mm
- Weight: 6260 g
- Country of origin: Germany
- Press connections: Ø 10 - 40 mm, Ø ⅜ - 1 ¼"
- For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
Package contents:
- 1x Rothenberger Press Jaw Standard TH26 for pressing machine ROMAX 4000 ( 015326X )
Product description:
These press jaws from Rothenberger, whose high quality materials and workmanship have proven their worth, are suitable for pressing metal or plastic fitting systems. The use of a special hardening process, DURA LAZR TEC technology, and a partial laser hardening process allow precise and safe crimping with increased durability. This minimizes wear and tear and increases the number of pressure cycles by 100% compared to the previous model. Moreover, long-term corrosion protection increases the service life of the press jaws. Thanks to the use of high-strength special steel, these press jaws are suitable for all pressing machines with an axial thrust of 32 to 34 kN.
DURA LAZR TEC process - Partial laser hardening ensures maximum hardening in highly loaded areas. This reduces wear and tear and ensures high contour accuracy. When combined with forged, high-strength and flexible special steel, this new generation of press jaws guarantees a 100% longer service life than the previous generation. Its 3-bolt synchronization mechanism allows the pressing machine to be opened with just one finger. The precisely manufactured contour ensures optimal and secure crimping.
Technical specifications:
Product diameter: 26 mm
Product weight: 2.1 kg
Product height: 3.9 cm
Product length: 15.5 cm
Product width: 10.7 cm
Product country of origin: DE
Scope of Delivery:
- Push rod clamp no. 6845 size 3
Product Description:
Pressure clamp - (push rod and hand lever counter-rotating) - with long push rod guide - base body made of malleable cast iron, painted - lever parts and push rod made of tempered steel, galvanised and passivated - rivets made of stainless steel running in case-hardened bearing bushes - bearing points greased - ergonomic, oil-resistant handle with large hand rest and soft component - Advantage: - Low overall height in clamping position
Technical Data:
- F1: 4kN
- Property: Compression clampFor commercial use, please observe the building regulations!
Scope of Delivery:
- Push rod clamp no. 6841 size 2
- Supplied with hardened and tempered, galvanised tightening screw no. 6880
Product Description:
with small angled foot - push and pull clamp - with long push rod guide - the clamp can be attached to sheet metal walls without an angled foot or screwed into fixture bodies with a thread on the end face
Technical Data:
- A: 10mm
- D: 5.6mm
- M max.: 36mm
- M min.: 31.8mm
- L2: 19mm
- M2: M16x1.5mm
- L1: 114mm
- H1: 85.5mm
- F1: 2kN
- Total height: 95mm
- B max: 58.5mm
- Bore Ø: 5.6 mm
- F2: 2kN
- B min.: 32.5mm
- P: 34mm
- K: 12.5mm
- E: 20mm
- H: 20mm
- N: 50mm
- Total length: 114mmFor commercial use, please observe the building regulations!
