Power Tools

Show previous products

• 

  Options

  Bosch Professional Bosch GSR 18V-110 C cordless drill driver 18V 110Nm brushless + 1x ProCore rechargeable battery 4.0Ah + L-Boxx - without charger

  Scope of Delivery: - 1x Bosch GSR 18V-110 C cordless drill driver solo - 1x L-Boxx - 1x suitable insert - 1x Bosch GBA 18 V 4.0 Ah ProCORE slide-in battery - without charger Product Description: The Bosch GSR 18V-110 C cordless drill driver has a wide range of applications thanks to its 18 volts and 25 torque settings. The EC brushless motor ensures a long service life and maximum power for the cordless drill driver. The 2 gears enable a quick change between low (gear 1) and high (gear 2) speeds. Furthermore, the drilling and screwdriving functions can be easily adjusted. The clockwise and anti-clockwise rotation allows you to work quickly in both directions. The built-in kickback control function offers better control over the tool and thus increases user protection. The work light installed on the GSR 18V 110 C makes it possible to work in places with little lighting. The temperature-dependent overload protection protects the tool from unnecessary temperatures and therefore extends its service life. Thanks to the 1.5 - 13 mm tool holder, the most common tasks can be carried out without any problems. The Bosch Connectivity Module (not included in the scope of delivery) enables, for example, the kickback control and speed levels to be regulated. The belt clip allows the tool to be attached on the right and left side. The additional handle makes the tool easier to handle. The Bosch ProCORE Professional is an 18 volt battery with 4.0 Ah, based on Li-Ion technology. The ProCORE technology impresses with its performance, which is comparable to the 1600 watt motor of a corded tool and thus provides enough power for the heaviest applications with cordless tools. It therefore delivers 87% more power than normal 18 V battery-powered tools and guarantees consistently high performance. Thanks to the latest cell technology, the ProCORE battery delivers the same power as a standard 4.0 Ah battery - but with considerably smaller dimensions and less weight. Thanks to COOLPACK technology, the ProCORE has 135% longer service life than a standard battery. This also prevents the battery from overheating. Technical Data: - Bosch GSR 18V-110 C - Manufacturer number: 06019G0109 - Power supply: Rechargeable battery - Battery power (V): 18 Volt - Idle speed 1st gear (min¯¹): 0 - 480 min-1 - Idle speed 2nd gear (min¯¹): 0 - 2,100 min-1 - Drill chuck clamping width (mm): 1.5 - 13 mm - Hard torque (Nm): 110 Nm - Torque soft (Nm): 47 Nm - Screw Ø (mm): 12 mm - Torque levels: 25+1 - Drill Ø steel (mm): 13 mm - Drill Ø wood (mm): 82 mm - Weight (kg): 2.2 kg - Bosch GBA 18 V 4.0 Ah ProCORE slide-in battery - Manufacturer number: 1600A016GB - Battery voltage: 18 V - Battery capacity: 4.0 Ah / 4000 mAh - Weight: 515 g - Dimensions (LxWxH): 120x76x51 mm - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  CHF 233.25

  Options

• 

  Options

  Makita Makita DDF 486 RT1 cordless drill driver 18 V 130 Nm brushless + 1x rechargeable battery 5.0 Ah + charger

  Scope of Delivery: - 1x Makita DDF 486 cordless drill driver - 1x side handle ( 127702-4 ) - 1x mounting bracket ( 346317-0 ) - 1x bit holder ( 452947-8 ) - 1x PH / LS double bit ( 784637-8 ) - 1x Makita BL 1850 B 18 V 5.0 Ah battery ( 197280-8 ) - 1x Makita DC 18 RC charger ( 195584-2 ) Product Description: The DDF486 from Makita is a small yet powerful 18 V cordless drill driver. It is equipped with a 2-speed all-metal planetary gearbox, which means that high torques can be transmitted better. It also has a brushless motor, which enables a more compact design and longer service life. With the metal drill chuck and side handle supplied, the DDF486 is the ideal tool for all applications requiring high torque. The integrated, bright double LED provides optimum illumination of the work area and also has a pre-glow and afterglow function. The deep discharge protection prevents the battery from being completely discharged by switching the tool off beforehand. Makita is a leading manufacturer of power tools, characterised by high quality and a huge 18 V ecosystem. Technical Data: - Manufacturer: Makita - Manufacturer's designation: DDF 486 - Battery voltage: 18 V - Battery system: LXT - Battery protection system: Yes - Idle speed: 0 - 550 / 2100 min-¹ - Torque hard / soft: 130 / 65 Nm - Torque settings: 21 - Drilling capacity in wood: 76 mm - Drilling capacity in steel: 13 mm - Mounting: 1/2"-20UNF " - Drill chuck clamping width: 1.5 - 13 mm - Product weight: 2.6 kg - Weight incl. battery (EPTA): 2.3 - 2.6 kg - Product dimensions (L x W x H): 178 x 81 x 217 mm - Battery type (Ni-Cd / Li-Ion): Li-ion - Sound pressure level (LpA): 74 dB(A) - K-value noise: 3 dB(A) - Vibration: ≤ 2.5 m/s² - K-value vibration: 1.5 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  CHF 297.12

  Options

• 

  Options

  Makita Makita DDF 486 RF cordless drill driver 18 V 130 Nm brushless + 2x rechargeable battery 3.0 Ah + charger

  Scope of Delivery: - 1x Makita DDF 486 cordless drill driver - 1x side handle ( 127702-4 ) - 1x mounting bracket ( 346317-0 ) - 1x bit holder ( 452947-8 ) - 1x PH / LS double bit ( 784637-8 ) - 2x Makita BL 1830 B 18 V 3.0 Ah battery ( 197599-5 ) - 1x Makita DC 18 RC charger ( 195584-2 ) Product Description: The DDF486 from Makita is a small yet powerful 18 V cordless drill driver. It is equipped with a 2-speed all-metal planetary gearbox, which means that high torques can be transmitted better. It also has a brushless motor, which enables a more compact design and longer service life. With the metal drill chuck and side handle supplied, the DDF486 is the ideal tool for all applications requiring high torque. The integrated, bright double LED provides optimum illumination of the work area and also has a pre-glow and afterglow function. The deep discharge protection prevents the battery from being completely discharged by switching the tool off beforehand. Makita is a leading manufacturer of power tools, characterised by high quality and a huge 18 V ecosystem. Technical Data: - Manufacturer: Makita - Manufacturer's designation: DDF 486 - Battery voltage: 18 V - Battery system: LXT - Battery protection system: Yes - Idle speed: 0 - 550 / 2100 min-¹ - Torque hard / soft: 130 / 65 Nm - Torque settings: 21 - Drilling capacity in wood: 76 mm - Drilling capacity in steel: 13 mm - Mounting: 1/2"-20UNF " - Drill chuck clamping width: 1.5 - 13 mm - Product weight: 2.6 kg - Weight incl. battery (EPTA): 2.3 - 2.6 kg - Product dimensions (L x W x H): 178 x 81 x 217 mm - Battery type (Ni-Cd / Li-Ion): Li-ion - Sound pressure level (LpA): 74 dB(A) - K-value noise: 3 dB(A) - Vibration: ≤ 2.5 m/s² - K-value vibration: 1.5 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  CHF 306.45

  Options

• 

  Options

  Makita Makita DDF 482 RA1J cordless drill driver 18 V 62 Nm + 1x rechargeable battery 2.0 Ah + charger + Makpac

  Scope of Delivery: - 1x Makita DDF 482 18 V Li-Ion cordless drill driver - 1x Makita BL 1820 B 18 V 2.0 Ah rechargeable battery - 1x Makita DC 18 RC charger - 1x Makita Makpac system case - 1x universal insert Product Description: The Makita DDF 482 is a powerful Li-Ion cordless drill driver with a 2-speed full metal planetary gearbox. The torque can be set perfectly for every application in 21 stages and a bright LED with afterglow function ensures optimum visibility. The cordless drill driver also has sophisticated protection against dust and splash water. With the Makita battery, charger and Makpac with insert, the screwdriver is always perfectly stowed away and ready for immediate use. Technical Data: - Idle speed 1st gear: 0 - 600 min-1 - Idle speed 2nd gear: 0 - 1,900 min-1 - Drilling capacity in wood: 38 mm - Drilling capacity in steel: 13 mm - Torque soft: 36 Nm - Torque hard: 62 Nm - Drill chuck clamping width: 1.5 - 13 mm - Battery voltage: 18 V - Dimensions (LxWxH): 185x79x249 mm - Weight (without battery/side handle): 1.7 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  CHF 159.41

  Options

• 

  Options

  Bosch Professional Bosch GSR 18V-90 C Professional cordless drill driver 18 V 64 Nm brushless + 1x ProCORE rechargeable battery 4.0 Ah + L-Boxx - without charger

  Scope of Delivery: - 1x Bosch GSR 18V-90 C Professional cordless drill driver - 1x Bosch GBA 18 V 4.0 Ah ProCORE rechargeable battery ( 1600A016GB ) - 1x Bosch L-Boxx 136 ( 1600A012G0 ) - without charger Product Description: With the GSR 18V-90 C, Bosch offers a compact and powerful cordless drill driver. The KickBack Control reduces the risk of injury by switching off the drill driver immediately if the machine becomes wedged. The brushless motor ensures a more compact design and a longer service life thanks to reduced wear. Thanks to the Precision Clutch function, the machine is prevented from over-torquing once the preset torque has been reached, further reducing wear. Bosch Professional is a leading manufacturer of power tools of all kinds, characterised above all by its long tradition and high quality workmanship. Technical Data: - Manufacturer: Bosch Professional - Manufacturer's description: GSR 18V-90 C Professional - Battery voltage: 18 V - Torque (soft/hard/max.): 36/64/- Nm - Idle speed (1st gear / 2nd gear): 0 - 630 / 0 - 2,100 min-1 - Drill chuck clamping range, min./max.: 1.5 / 13 mm - Weight excl. battery: 1.1 - Torque levels: 21 - Drill Ø wood, max.: 68 - Drill Ø steel, max.: 13 - Screw Ø, max.: 12 - Vibration emission value ah: 1.6 - Uncertainty K: 1.5 - Sound pressure level: 88 dB(A) - Sound power level: 77 dB(A) - Uncertainty K: 5 dB - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  CHF 228.89

  Options

• 

  Options

  Bosch Professional Bosch GSR 18V-90 C Professional cordless drill driver 18 V 64 Nm brushless + 2x rechargeable battery 2.0 Ah + charger + L-Boxx

  Scope of Delivery: - 1x Bosch GSR 18V-90 C Professional cordless drill driver - 2x Bosch GBA 18 V 2 Ah rechargeable battery ( 1600Z00036 ) - 1x Bosch GAL 18V-40 charger ( 1600A019RJ ) - 1x Bosch L-Boxx 136 ( 1600A012G0 ) Product Description: With the GSR 18V-90 C, Bosch offers a compact and powerful cordless drill driver. The KickBack Control reduces the risk of injury by switching off the drill driver immediately if the machine becomes wedged. The brushless motor ensures a more compact design and a longer service life thanks to reduced wear. Thanks to the Precision Clutch function, the machine is prevented from over-torquing once the preset torque has been reached, further reducing wear. Bosch Professional is a leading manufacturer of power tools of all kinds, characterised above all by its long tradition and high quality workmanship. Technical Data: - Manufacturer: Bosch Professional - Manufacturer's designation: GSR 18V-90 C Professional - Battery voltage: 18 V - Torque (soft/hard/max.): 36/64/- Nm - Idle speed (1st gear / 2nd gear): 0 - 630 / 0 - 2,100 min-1 - Drill chuck clamping range, min./max.: 1.5 / 13 mm - Weight excl. battery: 1.1 - Torque levels: 21 - Drill Ø wood, max.: 68 - Drill Ø steel, max.: 13 - Screw Ø, max.: 12 - Vibration emission value ah: 1.6 - Uncertainty K: 1.5 - Sound pressure level: 88 dB(A) - Sound power level: 77 dB(A) - Uncertainty K: 5 dB - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  CHF 258.97

  Options

• 

  Bosch Professional Bosch GSR 18V-150 C Professional cordless drill driver 18 V 150 Nm Biturbo Brushless + 1x rechargeable battery 5.0 Ah + charger + L-Boxx

  Sun, 11/16/2025

  Scope of Delivery: - 1x Bosch GSR 18V-150 C Professional cordless drill driver - 1x Bosch GBA 18 V 5.0 Ah Li-Ion battery ( 2607337069 ) - 1x Bosch GAL 18V-40 charger ( 1600A019RJ ) - 1x L-Boxx - 1x suitable insert Product Description: The Bosch GSR 18V-150 C Professional cordless drill driver impresses with its 150 Newton metres of torque paired with Biturbo technology. It also features precise Electronic Angle Detection, which always ensures the correct angle for long screws. The KickBack Control is also installed. The robust metal drill chuck and metal gearbox promise a long service life and a lot of enjoyment during use. The Bosch Connectivity Module (not included) is also compatible. The GSR 18V-150 C Professional delivers optimum results when screwing and drilling in wood and metal, especially when drilling large diameters, e.g. hole saws up to 150 mm. Naturally, an LED light is installed. One of the machine's highlights is the three torque settings. These are 84 Nm in soft mode, 100 Nm in hard mode and 150 Nm in the maximum range. Important to know: Biturbo devices must be operated with ProCore batteries from 5.5 amps. With smaller batteries, the performance of the device is licenced. Bosch Professional is a leading manufacturer of power tools of all kinds, characterised by its long tradition and high quality workmanship. Technical Data: - Manufacturer: Bosch - Manufacturer's description: GSR 18V-150 C - Manufacturer's code: 06019J5002 - Torque (max.): 150 Nm - Torque (soft/hard/max.): 84/100/150 Nm - Idle speed (1st gear / 2nd gear): 0 - 550 / 0 - 2,200 min-1 - Battery type: Lithium-ion - Drill chuck clamping range, min./max.: 1.5 / 13 mm - Battery voltage: 18 V - Torque levels: 25+1 - Screw diameter - Screw Ø, max.: 13 mm - Drill Ø wood, max.: 150 mm - Drill Ø steel, max.: 16 mm - Vibration emission value ah: 1.5 m/s² - Uncertainty K: 2.5 m/s² - Sound pressure level: 81 dB(A) - Sound power level: 92 dB(A) - Uncertainty K: 5 dB - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 283.35

• 

  Festool Festool C 18-Basic cordless drill driver 18 V 45 Nm brushless + 1x rechargeable battery 5.0 Ah + charger + systainer

  Sun, 11/16/2025

  Scope of Delivery: - 1x Festool C 18 Basic cordless drill driver 18 V - 1x PZ 2 bit - 1x CENTROTEC magnetic bit holder BH 60 CE - 1x CENTROTEC tool chuck - 1x belt clip - 1x FastFix 13 mm quick-action drill chuck - 1x Festool BP 18 Li 5,0 ASI battery 18 V 5,0 Ah ( 577660 ) - 1x Festool TCL 6 quick charger ( 201135 ) - 1x Systainer Product Description: Festool C 18 Basic cordless drill driver has been designed for maximum flexibility. The fully electronic torque adjustment, the angle and eccentric attachment (not included), the CENTROTEC quick-change system and the depth impact are the solution for any drilling or screwdriving application. The brushless EC-TEC motor and the combination of Li-High Power batteries (not included) ensure a long service life. It is characterised by its light weight and long-lasting working behaviour. Further refinements include switching from screwing to drilling without torque adjustment and the FastFix interface, which ensures that attachments can be changed in seconds. Thanks to its compact design and low weight, it is a master in all assembly areas. Whether doors, back walls, mouldings or entire kitchens, the Festool C 18 Basic cordless drill driver will not let you down. The drill driver has the unique C design, but is also available in the T design as 18+3. Festool stands for the highest quality standards and very well thought-out tool concepts, and the C 18 confirms this. Technical Data: - Manufacturer: Festool - Battery voltage: 18 V - Gears: 2 - Idle speed 1st/2nd gear: 0 - 450/0 - 1500 min-¹ - Drilling diameter wood/steel: 45/13 mm - Torque setting 1st/2nd gear: 0.8 - 8/0.5 - 6 Nm - Max. Torque wood/steel: 27/45 Nm - Drill chuck clamping width: 1.5 - 13 mm - Drilling in metal: Total average vibration value ah: 3.60 m/s² - Drilling in metal: Standards series EN 60745: 62841 - Drilling in metal: Uncertainty (noise) K: 5 dB - Drilling in metal: Uncertainty (vibration) K: 1.50 m/s² - Drilling in metal: A-weighted sound pressure level Lp: 65 dB(A) - Drilling in metal: A-weighted sound power level Lw: 76 dB(A) - Screws: Total vibration mean value ah: 2.50 m/s² - Screws: Standards series EN 60745: 62841 - Screws: Uncertainty (noise) K: 3 dB - Screws: Uncertainty (vibration) K: 1.50 m/s² - Screws: A-weighted sound pressure level Lp: 64 dB(A) - Screws: A-weighted sound power level Lw: 75 dB(A) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 384.90

• 

  Makita Makita DDF 487 ZJ cordless drill driver 18 V 40 Nm brushless + Makpac - without battery, without charger

  Sun, 11/16/2025

  Scope of Delivery: - 1x Makita DDF 487 cordless drill driver - 1x Makita Makpac - 1x universal insert - without battery, without charger Product Description: The Makita DDF 487 is a very compact and versatile cordless drill driver. Its compact design makes it the ideal choice for working in hard-to-reach areas. The drill driver is equipped with a 2-speed planetary gearbox with a robust aluminium gearbox housing cover, which ensures easy screwing and drilling. In addition, the DDF 487 has a brushless motor (brushless), a motor brake, right/left rotation and a 13 mm quick-action drill chuck. Another feature is the built-in double LED with afterglow function, which provides good lighting conditions in poorly lit rooms. The ergonomically redesigned handle is intended to minimise damage to health, allowing long working days without significant signs of fatigue. Makita is a leading manufacturer of power tools, high quality workmanship and a huge 18 V programme are among the company's trademarks. Technical Data: - Manufacturer: Makita - Manufacturer's designation: DDF 487 - Battery voltage: 18 V - Battery system: LXT - Battery protection system: Yes - Idle speed: 0 - 500 / 1700 min-¹ - Torque hard/soft: 40 / 25 Nm - Torque settings: 20 - Drilling capacity in wood: 36 mm - Drilling capacity in steel: 13 mm - Mounting: 1/2"-20UNF " - Drill chuck clamping width: 1.5 - 13 mm - Product weight: 1.6 kg - Product dimensions (L x W x H): 150 x 81 x 232 mm - Battery type (Ni-Cd / Li-Ion): Li-ion - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 107.50

• 

  Options

  Festool Festool T 18+3 Basic-4,0 Cordless Drill 50Nm 18V Brushless (577051) + 1x Battery 4.0Ah + Case - without charger

  2 Reviews

  Package contents: - 1x Festool T 18+3 Cordless Drill - 1x Bit PZ 2 - 1x Magnetic bit holder CENTROTEC BH 60 CE - 1x Tool chuck CENTROTEC - 1x Belt clip - 1x  Keyless chuck FastFix 13mm - 1x Battery Festool BP 18 Li 4.0Ah HPC-ASI 4.0Ah 18V HighPower (205034) - 1x Case Festool - without charger Product description: Festool presents T 18+3 Basic, a powerful cordless drill/driver designed for full flexibility when drilling and screwdriving. It is equipped with a completely electronic torque adjustment, angle gear and eccentric module (not included), CENTROTEC quick-change system and depth stop, making it the ideal solution for all drilling and screwdriving applications. Its robust EC-TEC brushless motor and the combination of Li-High Power batteries (not included) ensure a long service life. This drill/driver is characterised by its low weight and its endurance during work. It also features a FastFix interface that ensures a rapid change of bits in few seconds without the need for tools. Its compact design and low weight make it an asset in all areas of assembly. Whether for doors, back walls, skirting boards or entire kitchens, the T 18+3 Basic is the ideal tool. Festool stands for high quality standards and well thought-out tool concepts. Technical specifications: Manufacturer: Festool Festool Manufacturer Number: 576448 Successor of : 574763 Battery voltage: 18V Gears: 2 No-load speed (1st/2nd speed): 0 - 450/0 - 1500min-¹ Drilling diameter wood/steel: 45/13mm Torque adjustment (1st/2nd speed): 0,8 - 8/0,5 - 6Nm Max. torque wood/steel: 35/50Nm Chuck range: 1.5 - 13mm Drilling in metal: Standard series EN 60745: 62841 Drilling in metal: uncertainty (noise) K: 5dB Drilling in metal: Uncertainty (vibration) K: 1.50m/s². Drilling in metal: A-weighted sound pressure level Lp: 64dB(A) Drilling in metal: A-weighted sound power level Lw: 75dB(A) Fastening: total mean vibration value ah: 2.50 m/s² Fastening: Standard series EN 60745: 62841 Fastening: Uncertainty (noise) K: 5dB Fastening: Uncertainty (vibration) K: 1.50m/s². Fastening: A-weighted sound pressure level Lp: 64dB(A) Fastening: A-weighted sound power level Lw: 75dB(A)

  Read more less

  Pre-order

  CHF 248.93

  Options

• 

  Options

  Makita Makita DDF 453 RF1 Akku Bohrschrauber 18 V 42 Nm + 1x Akku 3,0 Ah + Ladegerät

  Lieferumfang: - 1x Makita DDF 453 Akku Bohrschrauber- 1x Makita BL 1830 B 18 V 3,0 Ah Akku ( 197599-5 )- 1x Makita DC 18 RC Akku Ladegerät ( 195584-2 )Produktbeschreibung:Makita bietet hier mit der DDF 453 einen leichten und kompakten Bohrschrauber. Das Werkzeug wurde für das Bohren in Holz, Metall, Keramik und Plastik sowie zum verschrauben diverser Materialen entwickelt. Der Akku Bohrschrauber verfügt über einen Rechts- /Links-lauf und eine elektronische Drehzahlregulierung. Der Bohrer ist mit einem präzisen 2-Gang Vollmetall Planetengetriebe ausgestattet und eignet sich dank Drehzahlsteuerung und Drehmomentbegrenzung auf 16 Stufen auch für feine Bohrarbeiten. Die Motorbremsen garantieren mehr Kontrolle wie auch eine exakte Schraubarbeit. Durch den gummierten, ergonomischen Handgriff und die kompakte Bauweise wird sicherer Halt und komfortables Arbeiten geleistet. Makita ist ein führender Hersteller für Elektrowerkzeuge, der sich durch eine lange Tradition und ein riesiges 18 V Ökosystem auszeichnet.  Technische Daten:Hersteller: MakitaHerstellerbezeichnung: DDF 453Akkuspannung: 18 VLeerlaufdrehzahl 1. Gang: 0 - 400Leerlaufdrehzahl 2. Gang: 0 - 1.300Bohrleistung in Holz: 36 mmBohrleistung in Stahl: 13 mmAnziehdrehmoment hart: 42 NmAnziehdrehmoment weich: 27 NmMax. Lösemoment: 38 NmSchnellspannbohrfutter: 1.5 - 13 mmFaktor K (Schall): 3 dB(A)Vibrationen: 2.5 m/s²Faktor K (Vibrationen): 1.5 m/s²Maße ( LxBxH ) : 222 x 79 x 244 mmSchalldruckpegel: 72 dB(A)Gewicht inkl. Akku: 1.6 kg Bei gewerblicher Nutzung beachten Sie bitte die Bauvorschriften!

  Read more less

  Pre-order

  CHF 130.09

  Options

• 

  Makita Makita DDF 487 F1 cordless drill driver 18 V 40 Nm brushless + 1x rechargeable battery 3.0 Ah - without charger

  Sun, 11/16/2025

  Scope of Delivery: - 1x Makita DDF 487 Z cordless drill driver - 1x Makita BL 1830 B 18 V 3.0 Ah battery ( 197599-5 ) - without charger Product Description: The Makita DDF 487 is a very compact and versatile cordless drill driver. Its compact design makes it the ideal choice for working in hard-to-reach areas. The drill driver is equipped with a 2-speed planetary gearbox with a robust aluminium gearbox housing cover, which ensures easy screwing and drilling. In addition, the DDF 487 has a brushless motor (brushless), a motor brake, right/left rotation and a 13 mm quick-action drill chuck. Another feature is the built-in double LED with afterglow function, which provides good lighting conditions in poorly lit rooms. The ergonomically redesigned handle is intended to minimise damage to health, enabling long working days without significant signs of fatigue. Makita is a leading manufacturer of power tools, high quality workmanship and a huge 18 V programme are among the company's trademarks. Technical Data: - Manufacturer: Makita - Manufacturer's designation: DDF 487 - Battery voltage: 18 V - Battery system: LXT - Battery protection system: Yes - Idle speed: 0 - 500 / 1700 min-¹ - Torque hard/soft: 40 / 25 Nm - Torque settings: 20 - Drilling capacity in wood: 36 mm - Drilling capacity in steel: 13 mm - Mounting: 1/2"-20UNF " - Drill chuck clamping width: 1.5 - 13 mm - Product weight: 1.6 kg - Product dimensions (L x W x H): 150 x 81 x 232 mm - Battery type (Ni-Cd / Li-Ion): Li-ion - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 120.21

Show more products