Direkt ist günstiger für Dich!

Wusstest du, dass Preisvergleich-Plattformen und Suchmaschinen bei jedem Kauf fett mitverdienen? Über 20 % vom Preis gehen nur für Werbung drauf – und das zahlen am Ende alle mit. Wir sagen: Nein danke und möchten die Werbekosten lieber als Preisreduktion an Euch weitergeben!

Aus diesem Grund übermitteln wir nicht mehr unseren gesamten Bestand, die Bestpreis-Angebote und Deals an die großen Plattformen und können Dir so - neben den Geschenken, BROpoints und anderen Vorteilen - wesentlich bessere Preise geben, die Du ausschließlich bei uns findest. Deswegen lohnt es sich, ohne Umwege, direkt zu uns zu kommen.

Initiative für bessere Preise und mehr Fairness im Online-Handel.

Finde hier ALLE ANGEBOTE, für die wir derzeit den Online-Bestpreis haben.

Neueste Artikel

Show previous products

PFERD PFERD Handpad POLINOX ( 4144155345 ) L224xW154mm red-brown

Wed, 11/26/2025

Scope of Delivery: - 1x PFERD hand pad L224xW154mm Product Description: Suitable for ultra-fine sanding on small to large surfaces and contours as well as cleaning work on metals and paintwork using hand sanding - achieves matt and silk-matt surfaces - very open structure - optimum contour adaptation thanks to high flexibility - reaches hard-to-reach areas - can be used for wet and dry sanding Technical Data: - Colour: red-brown - Length: 224 mm - Width: 154 mm - Type: coarse - Grain size: 100 - Material suitability INOX: very suitable - Material suitability aluminium: very suitable - Material suitability cast iron: very suitable - Material suitability steel: very suitable - Brand: PFERD - Material suitability paint: very suitable - Material suitability plastic: very well suitedFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 8.97
PFERD PFERD hand brush HBG 10 ST ( 8000430767 ) length 265 mm filament length 25 mm

Wed, 11/26/2025

Scope of Delivery: - 1x PFERD hand brush length 265 mm Product Description: Suitable for cleaning work in hard-to-reach areas such as angles, corners and pipes - Brushes with brass-plated steel wire are suitable for surface treatment and deburring - Brass-coated steel wire is less susceptible to corrosion and can withstand temperatures of up to 300 °C Technical Data: - Drive type: Manual insert - Number, rows: 1 - Pick-up system: Hand - Processing tasks: Cleaning, weld seam processing, roughening, paint stripping, removing oxide layers, derusting - Length, fill: 25mm - Ø facing material: 0.3mm - Advantages: Long service life thanks to the use of PFERD special wire. - Material: Steel wire (ST) - Length: 265 mm - Wire thickness: 0.3 mm - Trimming length: 25 mm - Brand: PFERD - Material suitability paint: very suitable - Total length: 265 mmFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 10.52
PFERD PFERD Handpad POLINOX ( 4144155350 ) L224xW154mm red-brown

Wed, 11/26/2025

Scope of Delivery: - 1x PFERD hand pad L224xW154mm Product Description: Suitable for ultra-fine sanding on small to large surfaces and contours as well as cleaning work on metals and paintwork using hand sanding - achieves matt and silk-matt surfaces - very open structure - optimum contour adaptation thanks to high flexibility - reaches hard-to-reach areas - can be used for wet and dry sanding Technical Data: - Colour: red-brown - Length: 224 mm - Width: 154 mm - Grade: medium - Grain size: 180 - Material suitability INOX: very suitable - Material suitability aluminium: very suitable - Material suitability cast iron: very suitable - Material suitability steel: very suitable - Brand: PFERD - Material suitability paint: very suitable - Material suitability plastic: very well suitedFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 8.76
PFERD PFERD hand brush HBG 10 INOX ( 8000430765 ) length 265 mm filament length 25 mm

Wed, 11/26/2025

Scope of Delivery: - 1x PFERD hand brush length 265 mm Product Description: suitable for cleaning work in hard-to-reach areas such as angles, corners and pipes - very good corrosion resistance with optimum service life - INOX trim blue for use on all stainless steels (INOX), such as V4A. Stainless steel wire (INOX) can withstand temperatures of up to 450 °C. Technical Data: - Drive type: Manual insert - Number, rows: 1 - Mounting system: Hand - Machinable materials: Aluminium, Other non-ferrous metals - Machining tasks: Cleaning, removing oxide layers, derusting, removing annealing colours, paint stripping, roughening, weld seam processing - Length, filament: 25mm - Ø fill material: 0.3mm - Advantages: Very good corrosion resistance. - Material: Stainless steel wire (INOX) - Length: 265 mm - Wire thickness: 0.3 mm - Tipping length: 25 mm - Material suitability for aluminium: very suitable - Brand: PFERD - Total length: 265 mmFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 12.99
Options

PFERD PFERD flap disc ( 8000429930 ) Ø 125 mm grit size 80 / 180 M

Scope of Delivery: - 1x PFERD flap disc Ø 125 mm grit size 80 / 180 M Product Description: Ceramic grain CO-COOL - for aluminium - bore 22.23 mm Ø Technical Data: - Drive type: Cordless angle grinder, angle grinder - Application recommendation: For best performance, use at a recommended cutting speed of 30-35 m/s. - Machinable materials: Fibre-reinforced thermosets (GRP, CFRP), aluminium, zinc, titanium alloys, titanium, thermoplastics, steels up to 1,200 N/mm² ( 54 HRC, stainless steel (INOX), nickel-based alloys (e.g. Inconell and Hasteloy), hardened, tempered steels over 1,200 N/mm² (For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Pre-order
CHF 93.12

Options
Options

PFERD PFERD flap disc ( 8000429929 ) Ø 125 mm grit 60 / 100 G

Scope of Delivery: - 1x PFERD flap disc Ø 125 mm grit 60 / 100 G Product Description: Ceramic grain CO-COOL - for aluminium - bore 22.23 mm Ø Technical Data: - Drive type: Angle grinder, cordless angle grinder - Application recommendation: For best performance, use at a recommended cutting speed of 30-35 m/s. - Materials that can be machined: Fibre-reinforced thermosets (GRP, CFRP), nickel-based alloys (e.g. Inconell and Hasteloy), zinc, titanium alloys, titanium, thermoplastics, steels up to 1,200 N/mm² ( 54 HRC) - Machining tasks: Deburring, fine grinding in stages, cleaning, roughening, structuring (matting, line matting and satin finishing), surface processing, weld seam processing - Width: 18mm - Ø bore: 22.23mm - RPM, opt., up to: 5300RPM - RPM, opt., from: 4600RPM - Safety instructions: For safety reasons, the specified maximum permissible speed must never be exceeded. - Advantages: Optimum contour adaptation due to high flexibility. Produces a consistently high surface quality over the entire service life, as new, sharp abrasive is constantly released. Highly economical due to high sanding performance and long service life. - Ø: 125 mm - Grit size: 60 / 100 G - Max. speed: 12200 min-¹ - Material suitability INOX: very suitable - Abrasive: CO-COOL ceramic grit - Material suitability for aluminium: very suitable - Area of application: Aluminium - Material suitability steel: very suitable - Brand: PFERD For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Pre-order
CHF 98.63

Options
Options

PFERD PFERD flap disc ( 8000429788 ) Ø80xH30mm grit 40 shank Ø 6 mm

Scope of Delivery: - 1x PFERD flap disc Ø80xH30mm grit size 40 Product Description: Aluminium oxide A - with flaps made of abrasive on backing - for universal use from coarse to fine sanding - shaft Ø 6 mm Technical Data: - Shank Ø: 6mm - Drive type: Straight grinder, flexible shaft drive - Application recommendation: An increase in stock removal rate should be achieved by using a coarser grit size and not by increasing the contact pressure in order to prevent unnecessary tool wear and thermal stress on the workpiece. Reducing the contact pressure and peripheral speed and adding grinding oil reduces tool wear and the temperature load on the workpiece. Increasing the cutting speed results in a slightly finer surface finish. Increasing the contact pressure makes the surface slightly coarser. The softer the material to be machined, the coarser the surface (when using , For best performance, use at a recommended cutting speed of 15-20 m/s. This achieves an ideal compromise between stock removal rate, surface finish, temperature load on the workpiece and tool wear. Use a suitable grinding oil for the material to significantly increase the service life and grinding performance of the tools. - Machinable materials: Cast steel, brass, copper, grey/spheroidal cast iron (GG/GJL, GGG/GJS), hardened, tempered steels over 1,200 N/mm² ( 54 HRC, steels up to 1,200 N/mm² (For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Pre-order
CHF 12.95

Options
Options

PFERD PFERD flap disc Z-COOL ( 4144150305 ) Ø30xH20mm grit size 80 shaft Ø 6 mm

Scope of Delivery: - 1x PFERD flap disc Ø30xH20mm grit size 80 Product Description: zirconium aluminium oxide - for machining stainless steels and high-temperature alloys - high grinding performance - no clogging of the flaps - for coarse grinding tasks with high cutting performance and cool grinding - abrasive additives in the coating achieve a significantly higher stock removal rate, prevent clogging and result in cooler grinding - shank Ø 6 mm Technical Data: - Shank Ø: 6mm - Drive type: Straight grinder, flexible shaft drive - Application recommendation: Increasing the cutting speed results in a slightly finer surface. Increasing the contact pressure results in a slightly coarser surface. The softer the material to be processed, the coarser the surface (when using , An increase in the stock removal rate should be achieved by using a coarser grit size and not by increasing the contact pressure in order to prevent unnecessary tool wear and thermal stress on the workpiece. Reducing the contact pressure and peripheral speed and adding grinding oil reduces tool wear and the temperature load on the workpiece. Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. For best performance, use at a recommended cutting speed of 15-20 m/s. This achieves an ideal compromise between stock removal rate, surface finish, temperature load on the workpiece and tool wear. - Machinable materials: Titanium, copper, steels up to 1,200 N/mm² ( 54 HRC, hardened, tempered steels over 1,200 N/mm² (For commercial use, please observe the building regulations!).For commercial use, please observe the building regulations!

Read more less

Pre-order
CHF 10.37

Options
PFERD PFERD File rasp DIN 7261 ( 4000840388 ) Length 200 mm Cross-section 20 x 5 mm 2K-Ergo

Wed, 11/26/2025

Scope of Delivery: - 1x PFERD file rasp length 200 mm cross-section 20 x 5 mm Product Description: flat blunt - with ergonomic file handle - shape A - rectangular file with different cuts on both flat sides - cross cut on the front for roughing - rasp cut on the back for rasping - one carved edge - for deburring, creating openings, surface finishing and edge finishing of steel, non-ferrous metal (soft), wood and plastic - comfortable grip - file does not roll away Technical Data: - Handle: 2K-Ergo - Length: 200 mm - Cross section: 20 x 5 mm - Cut: cross cut / rasp cut - Material suitability aluminium: very suitable - Material suitability steel: very suitable - Brand: PFERD - Material suitability wood: very suitable - Material suitability plastic: very well suitedFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 16.33
Options

PFERD PFERD flap disc ( 8000429928 ) Ø 125 mm grit size 120 / 240 F

Scope of Delivery: - 1x PFERD flap disc Ø 125 mm grit size 120 / 240 F Product Description: Ceramic grain CO-COOL - for aluminium - bore 22.23 mm Ø Technical Data: - Drive type: Cordless angle grinder, angle grinder - Application recommendation: For best performance, use at a recommended cutting speed of 30-35 m/s. - Machinable materials: Stainless steel (INOX), brass, bronze, cast steel, cobalt-based alloys, copper, fibre-reinforced thermosets (GRP, CFRP), zinc, nickel-based alloys (e.g. Inconell and Hasteloy), aluminium, steel materials with a hardness > 54 HRC, steels up to 1,200 N/mm² (For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Pre-order
CHF 89.47

Options
PFERD PFERD flap disc ( 8000429784 ) Ø80xH30mm grit 120 shank Ø 6 mm

Wed, 11/26/2025

Scope of Delivery: - 1x PFERD flap disc Ø80xH30mm grit size 120 Product Description: Aluminium oxide A - with flaps made of abrasive on backing - for universal use from coarse to fine sanding - shaft Ø 6 mm Technical Data: - Shank Ø: 6mm - Drive type: Flexible shaft drive, straight grinder - Application recommendation: Reducing the contact pressure and peripheral speed and adding grinding oil reduces tool wear and the temperature load on the workpiece. An increase in stock removal rate should be achieved by using a coarser grit and not by increasing the contact pressure in order to prevent unnecessary tool wear and thermal stress on the workpiece. Increasing the cutting speed results in a slightly finer surface finish. Increasing the contact pressure results in a slightly coarser surface. The softer the material to be processed, the coarser the surface (when using , Use a suitable grinding oil for the material to significantly increase the service life and grinding performance of the tools. For best performance, use at a recommended cutting speed of 15-20 m/s. This achieves an ideal compromise between stock removal rate, surface finish, temperature load on the workpiece and tool wear. - Machinable materials: Steels up to 1,200 N/mm² ( 54 HRC, stainless steel (INOX) - Machining tasks: Levelling, surface processing, structuring (matting, line matting and satin finishing), fine grinding in stages, weld seam processing, deburring - Width: 30mm - Note: PFERDERGONOMICS recommends flap discs in order to sustainably reduce the vibration and noise generated during use and to improve working comfort. - Length, shaft: 40mm - RPM, opt.: 4800RPM - Safety instructions: For safety reasons, the specified maximum permissible speed must never be exceeded. The contact pressure must be significantly reduced if the specified optimum speed is exceeded. Safety is only guaranteed if the clamping length is at least 15 mm and the specified maximum speed is not exceeded with open shank lengths. - Advantages: Consistently high material removal over the entire service life, as new, aggressive abrasive is constantly released. Optimum contour adaptation due to high flexibility. Can be used very close to edges and at angles thanks to the flat cast core design. - Grit size: 120 - Max. speed: 9500 min-¹ - Abrasive: Aluminium oxide A - Material suitability Aluminium: limited suitability - Material suitability cast iron: very suitable - Material suitability steel: very suitable - Brand: PFERD - Material: Aluminium - Ø: 80 mm - Height: 30 mm - Material suitability plastic: limited suitabilityFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 12.95
PFERD PFERD flap disc ( 8000429748 ) Ø60xH30mm grit 40 shank Ø 6 mm

Wed, 11/26/2025

Scope of Delivery: - 1x PFERD flap disc Ø60xH30mm grit size 40 Product Description: Aluminium oxide A - with flaps made of abrasive on backing - for universal use from coarse to fine sanding - shaft Ø 6 mm Technical Data: - Shank Ø: 6mm - Drive type: Flexible shaft drive, straight grinder - Application recommendation: Use at a recommended cutting speed of 15-20 m/s for best performance. This achieves an ideal compromise between stock removal rate, surface quality, temperature load on the workpiece and tool wear. Increasing the cutting speed results in a slightly finer surface finish. Increasing the contact pressure results in a slightly coarser surface. The softer the material to be machined, the coarser the surface (when using , An increase in the stock removal rate should be achieved by using a coarser grit size and not by increasing the contact pressure in order to prevent unnecessary tool wear and thermal stress on the workpiece. Reducing the contact pressure and peripheral speed and adding grinding oil reduces tool wear and the temperature load on the workpiece. Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. - Machinable materials: Aluminium, malleable cast iron, brass, grey/spheroidal cast iron (GG/GJL, GGG/GJS), hardened, tempered steels over 1,200 N/mm² ( 54 HRC, steels up to 1,200 N/mm² (For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 11.27