Neueste Artikel

Show previous products

• 

  Options

  FEIN Fein Multimaster AMM 500 Plus AS cordless multifunction tool 18 V Starlock Plus Black Edition + 1x 4.0 Ah battery + L-Boxx

  Scope of Delivery: - 1x Fein cordless multimaster AMM 500 Plus AS multifunction tool 18 V - 1x Fein GBA 18V 4.0 Ah AS rechargeable battery AMP-Share by BOSCH - 1x L-Boxx 136 - without battery, without charger Product Description: The hand-held oscillating sander from FEIN is suitable for sanding small surfaces, corners and edges, for sawing thin sheet metal, wood and plastic parts, for scraping, polishing, rasping, cutting and separating with the approved insert tools and accessories. The MultiMaster AMM 500 PLUS in the cordless version is the powerful helper for many applications. Renovations, repairs and refurbishment work can be carried out quickly and effectively without being restricted by a power cable. The Starlock Plus holder with QuickIn quick-release system enables fast, one-handed tool changes and direct power transmission. The tool is powered by a motor that offers the same performance as the mains-powered version. It is self-supporting and mounted in the device for excellent noise and vibration reduction. The speed/vibration rate is infinitely adjustable to achieve optimum work results. The grip surface is covered with a non-slip soft grip coating. Compatible with the 18 V AMP Share batteries from BOSCH, the Fein cordless multimaster AMM 500 Plus AS offers maximum mobility and reliability for all your projects. Technical Data: - Manufacturer: FEIN - Manufacturer's designation: MultiMaster AMM 500 PLUS - Voltage: 18 Volt - Speed: 11,000 - 18,500 rpm - Tool holder: Starlock-Plus; Starlock - Oscillation angle/amplitude: +/- 1.7° - Sound pressure level: 74 dB(A) - Sound power level: 85 dB(A) - Uncertainty (K): 3 dB(A) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  CHF 177.13

  Options

• 

  Options

  FEIN Fein Multimaster AMM 500 Plus AS cordless multifunction tool 18 V Starlock Plus Black Edition + 1x 4.0 Ah battery + 33 pcs. accessories + L-Boxx

  Scope of Delivery: - 1x Fein cordless multimaster AMM 500 Plus AS multifunction tool 18 V - 1x Fein GBA 18V 4.0 Ah AS rechargeable battery AMP-Share by BOSCH - 1x L-Boxx 136 - 1x i-Rack for holding the i-Boxx - 1x i-Boxx - 1x Fein accessory set consisting of 33 individual parts: - 1x sanding plate - 5 x P60 delta sanding sheet - 5 x P80 delta sanding sheet - 5 x P120 delta sanding sheet - 1x full HSS saw blade with metal toothing, Ø 85 mm ( 63502106210 ) - 1x bi-metal HSS saw blade, Ø 100 mm ( 63502176210 ) - 3x E-Cut standard saw blade curved, 65 mm ( 63502225250 ) - 3x E-Cut long-life saw blade, 65 mm ( 63502161250 ) - 3x E-Cut standard saw blade, 35 mm ( 63502133250 ) - 3x E-Cut universal saw blade, 44 mm ( 63502223210 ) - 3x E-Cut universal saw blade, 44 mm ( 63502152210 ) Product Description: The hand-held oscillating sander from FEIN is suitable for sanding small surfaces, corners and edges, for sawing thin sheet metal, wood and plastic parts, for scraping, polishing, rasping, cutting and separating with the approved insert tools and accessories. The MultiMaster AMM 500 PLUS in the cordless version is the powerful helper for many applications. Renovations, repairs and refurbishment work can be carried out quickly and effectively without being restricted by a power cable. The Starlock Plus holder with QuickIn quick-release system enables fast, one-handed tool changes and direct power transmission. The tool is powered by a motor that offers the same performance as the mains-powered version. It is self-supporting and mounted in the device for excellent noise and vibration reduction. The speed/vibration rate is infinitely adjustable to achieve optimum work results. The grip surface is covered with a non-slip soft grip coating. Compatible with the 18 V AMP Share batteries from BOSCH, the Fein cordless multimaster AMM 500 Plus AS offers maximum mobility and reliability for all your projects. Technical Data: - Manufacturer: FEIN - Manufacturer's description: MultiMaster AMM 500 PLUS - Herstellernummer: 71294261000 - Voltage: 18 Volt - Oscillation speed: 11,000 - 18,500 rpm - Tool holder: Starlock-Plus; Starlock - Oscillation angle/amplitude: +/- 1.7° - Sound pressure level: 74 dB(A) - Sound power level: 85 dB(A) - Uncertainty (K): 3 dB(A) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  CHF 258.21

  Options

• 

  Options

  FEIN Fein Multimaster AMM 700 MAX AS cordless multifunction tool 18 V Starlock Max Black Edition + 2x rechargeable battery 4.0 Ah + charger + L-Boxx

  Scope of Delivery: - 1x Fein cordless multimaster AMM 700 MAX AS multifunction tool 18 V - 2x Fein GBA 18V 4.0 Ah AS rechargeable battery AMP-Share by BOSCH - 1x Fein GAL 1880 CV AS charger - 1x L-Boxx 136 Product Description: Discover the Fein cordless multimaster AMM 700 MAX AS multifunction tool in the Black Edition, a top product for demanding manual and DIY work. Equipped with the Starlock Max system, it enables efficient power transmission for precise and fast work. Please note that the scope of delivery does not include a battery or charger, which must be purchased separately. This tool impresses with its anti-vibration system for fatigue-free working and the QuickIN quick-clamping system, which enables tool changes in under three seconds. The powerful, brushless 18 V FEIN PowerDrive motor guarantees high efficiency and durability. Thanks to a robust metal gearbox and advanced technologies such as Electronic Cell Protection and COOLPACK technology, the service life of the tool and battery is maximised, while the electronic safety cut-out ensures your safety. Compatible with Bosch Professional 18 V batteries, the Fein cordless multimaster AMM 700 MAX AS offers maximum mobility and reliability for all your projects. Technical Data: - Manufacturer: Fein - Manufacturer's designation: Multimaster AMM 700 MAX AS - Battery voltage: 18 V - Battery compatibility: Li-Ion / ProCORE Li-Ion - Battery interface: 18 V AMPShare - Oscillations: 10 000 - 19 500 1/min - Tool holder: StarlockMax - Tool change: QuickIN - Amplitude: 2 x 2.0° - Weight without battery: 1.10 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  CHF 301.40

  Options

• Sale -CHF 25.72

  FEIN Fein GBA 18 V / 4.0 Ah 4000 mAh Li-Ion battery Bosch AMPShare ( 92604345020 )

  Tue, 11/18/2025

  Scope of Delivery: - 1x Fein GBA 18 V / 4.0 Ah 4000 mAh Li-Ion battery Bosch AMPShare ( 92604345020 ) Product Description: The Fein GBA 18 V / 4.0 Ah Li-Ion battery is an excellent choice for professionals and DIY enthusiasts looking for a reliable and long-lasting power source for their 18V tools. This battery is compatible with all devices that use an AMPShare 18V interface. It features advanced Electronic Cell Protection (ECP), which protects the battery from overload, overheating and deep discharge, thus contributing to a longer service life. In addition, the battery is equipped with COOLPACK 1.0 technology, which effectively dissipates heat and therefore extends the battery's service life compared to models without this technology. An integrated charge level indicator allows you to keep track of the available energy supply at all times and plan your work processes accordingly. These features make the Fein GBA 18 V / 4.0 Ah Li-Ion battery a reliable partner that will support you through long working days and maximise the efficiency of your projects. Technical Data: - Manufacturer: Fein - Manufacturer's description: GBA 18 V / 4.0 Ah - Herstellernummer: 92604345020 - Battery voltage: 18 Volt - Capacity: 4000 mAh - Weight: 608 g - Cell type: Lithium-ion - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 66.72 CHF 41.00

• 

  Festool Festool C 18-Basic-4,0 cordless drill driver 18 V 45 Nm brushless ( 577050 ) + 1x battery 4,0 Ah + systainer - without charger

  Tue, 11/18/2025

  Scope of Delivery: - 1x Festool C 18 Basic cordless drill driver 18 V - 1x PZ 2 bit - 1x CENTROTEC magnetic bit holder BH 60 CE - 1x CENTROTEC tool chuck - 1x belt clip - 1x FastFix 13 mm quick-action drill chuck - 1x Festool BP 18 Li 4.0 HPC-ASI 18 V 4.0 Ah rechargeable battery - 1x Systainer - without charger Product Description: Festool C 18 Basic cordless drill driver has been designed for maximum flexibility. The fully electronic torque adjustment, the angle and eccentric attachment (not included), the CENTROTEC quick-change system and the depth impact are the solution for any drilling or screwdriving application. The brushless EC-TEC motor and the combination of Li-High Power batteries (not included) ensure a long service life. It is characterised by its light weight and long-lasting working behaviour. Further refinements include switching from screwing to drilling without torque adjustment and the FastFix interface, which ensures that attachments can be changed in seconds. Thanks to its compact design and low weight, it is a master in all assembly areas. Whether doors, back walls, mouldings or entire kitchens, the Festool C 18 Basic cordless drill driver will not let you down. The drill driver has the unique C design, but is also available in the T design as 18+3. Festool stands for the highest quality standards and very well thought-out tool concepts, and the C 18 confirms this. Technical Data: - Manufacturer: Festool - Manufacturer number: 577050 - Battery voltage: 18 V - Gears: 2 - Idle speed 1st/2nd gear: 0 - 450/0 - 1500 min-¹ - Drilling diameter wood/steel: 45/13 mm - Torque setting 1st/2nd gear: 0.8 - 8/0.5 - 6 Nm - Max. Torque wood/steel: 27/45 Nm - Drill chuck clamping width: 1.5 - 13 mm - Drilling in metal: Total vibration mean value ah: 3.60 m/s² - Drilling in metal: Standards series EN 60745: 62841 - Drilling in metal: Uncertainty (noise) K: 5 dB - Drilling in metal: Uncertainty (vibration) K: 1.50 m/s² - Drilling in metal: A-weighted sound pressure level Lp: 65 dB(A) - Drilling in metal: A-weighted sound power level Lw: 76 dB(A) - Screws: Total vibration mean value ah: 2.50 m/s² - Screws: Standards series EN 60745: 62841 - Screws: Uncertainty (noise) K: 3 dB - Screws: Uncertainty (vibration) K: 1.50 m/s² - Screws: A-weighted sound pressure level Lp: 64 dB(A) - Screws: A-weighted sound power level Lw: 75 dB(A) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 292.57

• 

  Festool Festool TDC I-Basic-5,0 cordless drill driver 18 V 75 Nm ( 577052 ) Brushless + 1x battery 5,0 Ah + systainer - without charger

  Tue, 11/18/2025

  Scope of Delivery: - 1x Festool TDC 18/4 cordless drill driver - 1x Festool PZ 2 bit - 1x Festool CENTROTEC magnetic bit holder BH 60 CE-Imp - 1x Festool CENTROTEC tool chuck - 1x Festool FastFix quick-action drill chuck 13 mm KC 13-1/2-MMFP - 1x Festool additional handle - 1x Festool BP 18 Li 5.0 ASI 18 V 5.0 Ah battery - 1x Festool SYS3 M 187 systainer Product Description: With the TDC 18/4, Festool offers a powerful cordless drill driver for the highest demands. The combination of a handy design and enormous power enables comfortable and effective working. Thanks to the 4 different gears, the drill driver can be optimised for all applications. This means that screwing with 50 Nm is just as possible in 1st gear as drilling in 4th gear at 3600 rpm. The brushless EC-TEC motor combines enormous resilience and endurance with low wear and therefore a long service life. Thanks to the FastFix interface, the attachments can be changed quickly and without tools. The KickbackStop function minimises the risk of serious injury when the drill driver jams by stopping the motor, thereby protecting the user's health. Festool is a premium manufacturer of power tools that is characterised above all by its long tradition and very high quality workmanship. Technical Data: - Manufacturer: Festool - Manufacturer's designation: TDC 18/4 - Manufacturer number: 577052 - Battery voltage: 18 V - Gears: 4 - Idle speed 1st/2nd gear: 0 - 500/0 - 800 min-¹ - Idle speed 3rd/4th gear: 0 - 2350/0 - 3600 min-¹ - Drilling diameter wood/steel: 70/13 mm - Torque setting 1st/2nd gear: 2 - 20/2 - 20 Nm - Max. Torque wood/steel: 50/75 Nm - Drill chuck clamping width: 1.5 - 13 mm - Battery capacity: 4.0/5.2 Ah - Product weight with battery: 1.9/2.0 kg - Drive type: Battery - Drilling in metal: Total average vibration value ah: 3.00 m/s² - Drilling in metal: Standards series EN: 62841 - Drilling in metal: Uncertainty (noise) K: 5.00 dB - Drilling in metal: Uncertainty (vibration) K: 1.50 m/s² - Drilling in metal: A-weighted sound pressure level Lp: 73.00 dB(A) - Drilling in metal: A-weighted sound power level Lw: 84.00 dB(A) - Screws: Total average vibration value ah: 2.50 m/s² - Screws: Standards series EN: 62841 - Screws: Uncertainty (noise) K: 5.00 dB - Screws: Uncertainty (vibration) K: 1.50 m/s² - Screws: A-weighted sound pressure level Lp: 73.00 dB(A) - Screws: A-weighted sound power level Lw: 84.00 dB(A) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 262.62

• 

  Festool Festool TPC I-Basic-5,0 cordless impact drill 18 V 75 Nm ( 577053 ) Brushless + 1x battery 5,0 Ah + systainer - without charger

  Tue, 11/18/2025

  Scope of Delivery: - 1x Festool TPC 18/4 cordless impact drill - 1x PZ 2 bit - 1x CENTROTEC magnetic bit holder BH 60 CE-Imp - 1x CENTROTEC tool chuck - 1x FastFix quick-action drill chuck 13 mm KC 13-1/2-MMFP - 1x additional handle - 1x belt clip - 1x Festool BP 18 Li 5.0 ASI 18 V 5.0 Ah battery - 1x SYS3 M 187 Systainer - without charger Product Description: With the TPC 18/4, Festool offers a powerful cordless impact drill for the highest demands. The combination of a handy design and enormous power enables comfortable and effective work. Thanks to the 4 different gears, the drill driver can be optimised for all applications. This means that screwing with 50 Nm is just as possible in 1st gear as drilling in 4th gear at 3600 rpm. The brushless EC-TEC motor combines enormous resilience and endurance with low wear and therefore a long service life. Thanks to the FastFix interface, the attachments can be changed quickly and without tools. The KickbackStop function minimises the risk of serious injury when the drill driver jams by stopping the motor, thereby protecting the user's health. Festool is a premium manufacturer of power tools that is characterised above all by its long tradition and very high quality workmanship. Technical Data: - Manufacturer: Festool - Manufacturer's designation: TPC 18/4 - Manufacturer number: 577053 - Battery voltage: 18 V - Gears: 4 - Idle speed 1st/2nd gear: 0 - 500/0 - 800 min-¹ - Idle speed 3rd/4th gear: 0 - 2350/0 - 3600 min-¹ - Max. Impact speed: 57600.00 min-¹ - Drilling diameter wood/steel: 70/13 mm - Drilling diameter masonry (brick): 10.00 mm - Torque setting 1st/2nd gear: 2 - 20/2 - 20 Nm - Max. Torque wood/steel: 50/75 Nm - Drill chuck clamping width: 1.5 - 13 mm - Battery capacity: 4.0/5.2 Ah - Product weight with battery: 1.9/2.0 kg - Drive type: Battery - Impact drilling in concrete: Total mean vibration value ah: 14.00 m/s² - Impact drilling in concrete: Standards series EN: 62841 - Impact drilling in concrete: Uncertainty (noise) K: 5.00 dB - Impact drilling in concrete: Uncertainty (vibration) K: 1.50 m/s² - Impact drilling in concrete: A-weighted sound pressure level Lp: 94.00 dB(A) - Impact drilling in concrete: A-weighted sound power level Lw: 105.00 dB(A) - Drilling in metal: Overall vibration mean value ah: 3.00 m/s² - Drilling in metal: Standards series EN: 62841 - Drilling in metal: Uncertainty (noise) K: 5.00 dB - Drilling in metal: Uncertainty (vibration) K: 1.50 m/s² - Drilling in metal: A-weighted sound pressure level Lp: 73.00 dB(A) - Drilling in metal: A-weighted sound power level Lw: 84.00 dB(A) - Screws: Total average vibration value ah: 2.50 m/s² - Screws: Standards series EN: 62841 - Screws: Uncertainty (noise) K: 5.00 dB - Screws: Uncertainty (vibration) K: 1.50 m/s² - Screws: A-weighted sound pressure level Lp: 73.00 dB(A) - Screws: A-weighted sound power level Lw: 84.00 dB(A) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 269.54

• 

  Festool Festool PSC 420 EB-Basic-4,0 Cordless pendulum action jigsaw 18 V 120 mm ( 577026 ) Brushless + 1x battery 4,0 Ah + Systainer - without charger

  Tue, 11/18/2025

  Scope of Delivery: - 1x Festool CARVEX PSC 420 cordless pendulum action jigsaw - 1x fine tooth saw blade - 1x universal saw blade - 1x splinter guard - 1x Festool BP 18 Li 4.0 HPC-ASI 18 V 4.0 Ah rechargeable battery - 1x Festool Systainer SYS3 M 187 ( 204842 ) - without charger Product Description: The Festool PSC 420 cordless pendulum action jigsaw is ideal for a wide range of applications, e.g. for cut-outs for sinks and hobs, fitting work on furniture, kitchens and interior fittings. The device is also perfect for sawing out circles and curves, for notching end mouldings, for cutting workpieces to length, for curves on beams and for cuts from below. The PSC 420 impresses with its excellent curve behaviour thanks to the triple saw blade guide and the torsionally rigid lifting bar. The powerful EC-TEC motor ensures powerful traction and fast sawing progress. The ergonomic design, the very low weight of 2.4 kg and the very comfortable soft grip make handling very easy and convenient. An on/off switch on both sides can be easily reached in any grip position, and the FastFix quick-change system allows tables, travelling soles and saw blades to be changed quickly and effortlessly without tools. Thanks to the integrated strobe light and powerful extraction system, the Festool pendulum action jigsaw always guarantees a good view, for example to be able to recognise the cut precisely. The PSC 420 is supplied in the new SYS3 M 187 Systainer with matching insert, which has been equipped with an additional side handle. This makes it ideal for transporting from the vehicle to the construction site. Technical Data: - Manufacturer: Festool - Manufacturer's designation: CARVEX PSC 420 EB-Basic - Manufacturer number: 577026 - Battery voltage: 18 V - Stroke rate: 1,500 - 3,800 /min - Pendulum stroke stages: 4 - Cutting depth in wood: 120 mm - Cutting depth non-ferrous metal: 20 mm - Cutting depth steel (soft): 10 mm - Weight (without battery): 1.8 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 329.41

• 

  Festool Festool RTSC 400-Basic-ERGO cordless orbital sander 18 V 80 x 130 mm ( 577028 ) brushless + 1x battery 3.0 Ah + systainer - without charger

  Tue, 11/18/2025

  Scope of Delivery: - 1x Festool RTSC 400 one-handed cordless slide - 1x StickFix sanding pad SSH-STF-80x130/12 - 1x Longlife dust collection bag SB-Longlife RTS/DTS/ETS - 1x Festool PROTECTOR protective cover PR RTS-R 80x133 - 1x Festool BP 18 Li 3.0 Ergo I 18 V 3.0 Ah battery - 1x Festool SYS3 M 187 systainer - without charger Product Description: With the Festool RTSC 400 one-hand cordless scraper, you can work very flexibly and mobile with the power of a corded tool. The scraper impresses with a powerful brushless EC motor and, in combination with the compact, lightweight and ergonomic design, long and fatigue-free working is no problem. The tool is particularly suitable for use overhead and in hard-to-reach places, and with its own dust extraction system and the Longlife dust collection bag, or in conjunction with the Festool mobile dust extractor, dust-free working is guaranteed. The Festool PROTECTOR enables gentle sanding on window surfaces, frames and panels. Technical Data: - Manufacturer: Festool - Manufacturer number: 577028 - Manufacturer's designation: RTSC 400 - Battery voltage: 18 V - Idle speed: 6,000 - 10,000 min-1 - Working strokes: 12 000 - 20 000 min-¹ - Sanding stroke: 2 mm - Replaceable sanding pad: 80 x 130 mm - Dust extraction connection: 27 mm - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 283.42

• 

  Festool Festool AGC EB-Basic-5,0 cordless angle grinder 18 V 125 mm brushless ( 577031 ) + 1x battery 5,0 Ah + systainer - without charger

  Tue, 11/18/2025

  Scope of Delivery: - 1x Festool AGC 18-125 cordless angle grinder - 1x flange BF-AGC 18 - 1x spanner KF-AGC 18 - 1x quick-release nut QRN-AGC 18 - 1x Protective cover SH-AGC 18 - 1x VIBROSTOP additional handle - 1x Festool BP 18 Li 5.0 ASI 18 V 5.0 Ah battery - 1x Systainer³ SYS3 M 187 - without charger Product Description: The Festool AGC 18-125 cordless angle grinder impresses with its encapsulated, brushless EC-TEC motor, making it dust-resistant and durable. Thanks to the infinitely variable speed of 4500 - 8500 rpm¹, cutting and grinding suitable for the material is no problem. The consistently ergonomic construction of the AGC 18-125 is designed for optimum cutting and good handling. Unnecessary vibrations have been avoided by decoupling the motor and housing, which also makes working for long periods more comfortable. The soft start, electronic overload protection, motor brake and restart protection ensure safer working. It goes without saying that the angle grinder is compatible with the battery packs and chargers in the 18 V class. The exceptionally high quality of the angle grinder is guaranteed by the Festool quality standard. To summarise, the AGC 18-125 is a powerhouse with a wide range of useful functions. Technical Data: - Manufacturer: Festool - Manufacturer's description: AGC 18-125 EB-Basic - Manufacturer number: 577031 - Battery voltage: 18 V - Idle speed: 4500 - 8500 min¹ - Disc Ø: 125 mm - Spindle thread/flange: M14 - Weight: 2.70 kg - Mounting: 22.23 mm - Surface grinding Total average vibration value ah: 5 m/s² - Surface grinding standard series EN 60745: EN 60745 - Surface grinding uncertainty: (noise) K: 3 dB - Surface grinding uncertainty (vibration) K: 1.50 m/s² - Surface grinding A-weighted sound pressure level Lp: 86 dB(A) - Surface grinding A-weighted sound pressure level Lw: 97 dB(A) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 314.92

• 

  Options

  Milwaukee Milwaukee Shockwave Bit Set 75 pcs. impact resistant bit set Impact Duty ( 4932492008 )

  3 Reviews

  Scope of Delivery: - 1x PH1 screwdriver bit 52 x 25 mm long - 3x PH2 screwdriver bit 52 x 25 mm long - 1x PZ1 screwdriver bit 52 x 25 mm long - 3x PZ2 screwdriver bit 52 x 25 mm long - 3x TX10 screwdriver bit 52 x 25 mm long - 3x TX15 screwdriver bit 52 x 25 mm long - 10x TX20 screwdriver bit 52 x 25 mm long - 9x TX25 screwdriver bit 52 x 25 mm long - 9x TX30 screwdriver bit 52 x 25 mm long - 2x TX40 screwdriver bit 52 x 25 mm long - 1x TX50 screwdriver bit 52 x 25 mm long - 1x TX BO15 screwdriver bit 52 x 25 mm long - 1x TX BO20 screwdriver bit 52 x 25 mm long - 1x TX BO25 screwdriver bit 52 x 25 mm long - 1x TX BO30 screwdriver bit 52 x 25 mm long - 2x Hex 4 mm screwdriver bit 52 x 25 mm long - 1x Hex 5 mm screwdriver bit 52 x 25 mm long - 2x PH2 screwdriver bit 20 x 50 mm long - 2x PZ2 screwdriver bit 20 x 50 mm long - 1x PZ3 screwdriver bit 20 x 50 mm long - 1x TX10 screwdriver bit 20 x 50 mm long - 2x TX15 screwdriver bit 20 x 50 mm long - 3x TX20 screwdriver bit 20 x 50 mm long - 3x TX25 screwdriver bit 20 x 50 mm long - 3x TX30 screwdriver bit 20 x 50 mm long - 3x TX40 screwdriver bit 20 x 50 mm long - 1x Hex 8 mm magnetic socket spanner 48 mm long - 1x Hex 10 mm magnetic socket spanner 48 mm long - 1x magnetic bit holder 60 mm long - 1x case Product Description: The Milwaukee Shockwave Bit Set sets new standards in terms of screwdriver accessories and offers the ultimate solution for all drilling and screwdriving applications. This innovative, impact-resistant system accessory is specially designed for use with impact wrenches and impresses with its outstanding durability and precision. Equipped with laser-hardened WEAR GUARD TIP™ bit tips, it ensures a precise fit and extended bit life. The unique SHOCK ZONE™ geometry, which is designed to be extremely flexible, effectively absorbs impact forces and thus considerably reduces the load on the bit tip, significantly reducing the risk of breakage. The combination of this flexible SHOCK ZONE™ and a special hardening process ensures optimum shock absorption. Made from a steel alloy specially developed for Milwaukee®, SHOCKWAVE™™ bits are both more stable and more flexible, making them perfect for extremely tough screwdriving applications. Technical Data: - Manufacturer: Milwaukee - Manufacturer's description: SHOCKWAVE™ Impact Duty™ bit set (75 pc) - Manufacturer's number: 4932492008 - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  CHF 38.68

  Options

• 

  Festool Festool RSC 18 EB-Basic-5,0 cordless reciprocating saw 18 V brushless ( 578409 ) + 1x battery 5,0 Ah + systainer - without charger

  Tue, 11/18/2025

  Scope of Delivery: - 1x Festool RSC 18 EB cordless reciprocating saw - 1x RSC-AV dust extractor - 1x Reciprocating saw blade WOOD UNIVERSAL HSR 230/4.3 BI - 1x Festool BP 18 Li 5.0 ASI 18 V 5.0 Ah battery - 1x SYS3 L 187 Systainer - without charger Product Description: The RSC 18 EB Basic cordless reciprocating saw from Festool is a powerful, low-vibration and extremely robust machine that has the right saw blade for every material. Thanks to the special chuck, saw blades can be changed quickly and without contact. All the necessary parts are stored within easy reach in the matching Systainer. The large throttle switch enables a smooth start and perfect control of the stroke rate. Dust-free working is possible with the dust extractor included in the scope of delivery. The integrated LED provides optimum illumination of the work area and the saw blades can be rotated through 180°, making it easy to saw right up to the wall, ceiling or floor. The RSC 18 EB Basic cordless reciprocating saw from Festool is a high-quality tool for the toughest everyday jobs on the construction site. Technical Data: - Manufacturer: Festool - Manufacturer's description: RSC 18 EB-Basic - Manufacturer number: 578409 - Battery voltage: 18 V - Stroke rate: 0 - 3 000 min-¹ - Stroke length: 32.00 mm - Max. Pendulum stroke: 3.00 mm - Cutting depth wood: 230.00 mm - Cutting depth in metal profiles/tubes: 175.00 mm - Max. Max. material thickness metal: 20.00 mm - Product weight: 4.10 kg - Transport weight incl. accessories: 7.20 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 389.59

Show more products