Neueste Artikel
-
WILKE WILKE rotating ring DIN 4964 form B square width 14 x 14 mm ( 4118415144 )
Scope of Delivery: - Turning ring DIN 4964 form B square width 14 x 14 mm Product Description: HSS-EW9Co10 material 1.3207 - DIN 4964 - shape B: square - hardened, tempered and finish ground - ends straight and unground - hardness 65-69 HRC - cross-section tolerance: h13 length tolerance: +/- 2 mm Technical Data: - L: 200mm - B: 14 x 14mmFor commercial use, please observe the building regulations!
-
WILKE WILKE rotating ring DIN 4964 form B square width 12 x 12 mm ( 4118415130 )
Mon, 10/13/2025
Scope of Delivery: - Turning ring DIN 4964 form B square width 12 x 12 mm Product Description: HSS-EW9Co10 material 1.3207 - DIN 4964 - shape B: square - hardened, tempered and finish ground - ends straight and unground - hardness 65-69 HRC - cross-section tolerance: h13 length tolerance: +/- 2 mm Technical Data: - Length L: 200mm - B: 12 x 12mmFor commercial use, please observe the building regulations!
CHF 45.00
-
WILKE WILKE rotating ring DIN 4964 form B square width 10 x 10 mm ( 4118415098 )
Mon, 10/13/2025
Scope of Delivery: - Turning ring DIN 4964 form B square width 10 x 10 mm Product Description: HSS-EW9Co10 material 1.3207 - DIN 4964 - shape B: square - hardened, tempered and finish ground - ends straight and unground - hardness 65-69 HRC - cross-section tolerance: h13 length tolerance: +/- 2 mm Technical Data: - Length L: 100mm - B: 10 x 10mmFor commercial use, please observe the building regulations!
CHF 22.23
-
WILKE WILKE rotating ring DIN 4964 form B square width 8 x 8 mm ( 4118415090 )
Scope of Delivery: - Turning ring DIN 4964 form B square width 8 x 8 mm Product Description: HSS-EW9Co10 material 1.3207 - DIN 4964 - shape B: square - hardened, tempered and finish ground - ends straight and unground - hardness 65-69 HRC - cross-section tolerance: h13 length tolerance: +/- 2 mm Technical Data: - L: 200mm - B: 8 x 8mmFor commercial use, please observe the building regulations!
-
WILKE WILKE rotating ring DIN 4964 form B square width 4 x 4 mm ( 4118415028 )
Scope of Delivery: - Turning ring DIN 4964 form B square width 4 x 4 mm Product Description: HSS-EW9Co10 material 1.3207 - DIN 4964 - shape B: square - hardened, tempered and finish ground - ends straight and unground - hardness 65-69 HRC - cross-section tolerance: h13 length tolerance: +/- 2 mm Technical Data: - L: 80mm - B: 4 x 4mmFor commercial use, please observe the building regulations!
-
WILKE WILKE rotating ring DIN 4964 form A round Ø 8 mm ( 4118401078 )
Mon, 10/13/2025
Scope of Delivery: - Swivel DIN 4964 Form A round Ø 8 mm Product Description: HSS-EW9Co10 material 1.3207 - DIN 4964 shape A: round - hardened, tempered and finish ground - ends straight and unground - hardness 65-69 HRC - diameter tolerance: h8 length tolerance: +/- 2 mm Technical Data: - Length L: 100mm - Ø D: 8mmFor commercial use, please observe the building regulations!
CHF 16.89
-
MAYKESTAG MAYKESTAG slotting cutter DIN 850 D type N D.10,5 mm ( 4117802225 )
Scope of Delivery: - Slot milling cutter DIN 850 D Type N D.10.5 mm Product Description: HSS-Co - DIN 850 D - type N - for milling structural, case-hardening and heat-treatable steels as well as for short-chipping non-ferrous metals - straight shank with driving face Technical Data: - Type: N - Standard: DIN 850 D - Cutting material: HSS-CoFor commercial use, please observe the building regulations!
-
MAYKESTAG MAYKESTAG angle milling cutter DIN 1833 C Type N D.25 mm ( 4117802057 )
Scope of Delivery: - Angle milling cutter DIN 1833 C Type N D.25 mm Product Description: HSS-Co - DIN 1833 C - type N - for milling structural, case-hardening and heat-treatable steels as well as for short-chipping non-ferrous metals - straight shank with driving face - right-hand cutting Technical Data: - Type: N - Cutting material: HSS-CoFor commercial use, please observe the building regulations!
-
MAYKESTAG MAYKESTAG angle milling cutter DIN 1833 C Type N D.20 mm ( 4117802056 )
Scope of Delivery: - Angle milling cutter DIN 1833 C Type N D.20 mm Product Description: HSS-Co - DIN 1833 C - type N - for milling structural, case-hardening and heat-treatable steels as well as for short-chipping non-ferrous metals - straight shank with driving face - right-hand cutting Technical Data: - Type: N - Cutting material: HSS-CoFor commercial use, please observe the building regulations!
-
MAYKESTAG MAYKESTAG angle milling cutter DIN 1833 C Type N D.16 mm ( 4117802055 )
Mon, 10/13/2025
Scope of Delivery: - Angle milling cutter DIN 1833 C Type N D.16 mm Product Description: HSS-Co - DIN 1833 C - type N - for milling structural, case-hardening and heat-treatable steels as well as for short-chipping non-ferrous metals - straight shank with driving face - right-hand cutting Technical Data: - Type: N - Cutting material: HSS-CoFor commercial use, please observe the building regulations!
CHF 38.48
-
MAYKESTAG MAYKESTAG Angle milling cutter DIN 1833 D Type N D.32 mm ( 4117802048 )
Scope of Delivery: - Angle milling cutter DIN 1833 D Type N D.32 mm Product Description: HSS-Co - DIN 1833 D - type N - for milling structural, case-hardening and heat-treatable steels as well as for short-chipping non-ferrous metals - straight shank with driving face - right-hand cutting Technical Data: - Type: N - Cutting material: HSS-CoFor commercial use, please observe the building regulations!
-
MAYKESTAG MAYKESTAG angle milling cutter DIN 1833 D Type N D.25 mm ( 4117802047 )
Mon, 10/13/2025
Scope of Delivery: - Angle milling cutter DIN 1833 D Type N D.25 mm Product Description: HSS-Co - DIN 1833 D - type N - for milling structural, case-hardening and heat-treatable steels as well as for short-chipping non-ferrous metals - straight shank with driving face - right-hand cutting Technical Data: - Type: N - Cutting material: HSS-CoFor commercial use, please observe the building regulations!
CHF 55.84
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"