Neueste Artikel
-
HELLER HELLER centring drill Ø 9 mm ( 4300000193 )
Fri, 10/17/2025
Scope of Delivery: - Centre drill Ø 9 mm Product Description: HST-hardened surface guarantees increased breaking strength during impact - higher strength in the event of reinforcement hits - suitable for mounting shafts 4300 000 194, 4300 000 195, 4300 000 197, 4300 000 198 Technical Data: - Total length: 120mmFor commercial use, please observe the building regulations!
CHF 9.91
-
HELLER HELLER hammer drill Trijet Ultimate D.14,0mm Working-L.250mm L.300mm ( 4300000185 )
Fri, 10/17/2025
Scope of Delivery: - Hammer drill Trijet Ultimate D.14,0mm Working-L.250mm L.300mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!
CHF 32.33
-
HELLER HELLER hammer drill Trijet Ultimate D.12,0mm Working-L.250mm L.310mm ( 4300000184 )
Fri, 10/17/2025
Scope of Delivery: - Hammer drill Trijet Ultimate D.12,0mm Working-L.250mm L.310mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!
CHF 29.16
-
HELLER HELLER hammer drill Trijet Ø 10 mm working l.250 mm l.310 mm ( 4300000183 )
Fri, 10/17/2025
Scope of Delivery: - Hammer drill Trijet Ø 10 mm working l.250 mm l.310 mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!
CHF 21.53
-
HELLER HELLER hammer drill Trijet Ultimate D.14,0mm Working-L.150mm L.200mm ( 4300000180 )
Fri, 10/17/2025
Scope of Delivery: - Hammer drill Trijet Ultimate D.14,0mm Working-L.150mm L.200mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!
CHF 25.97
-
HELLER HELLER hammer drill Trijet Ultimate D.10,0mm Working-L.150mm L.210mm ( 4300000178 )
Scope of Delivery: - Hammer drill Trijet Ultimate D.10,0mm Working-L.150mm L.210mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!
-
HELLER HELLER hammer drill Trijet Ultimate D.8,0mm Working-L.150mm L.210mm ( 4300000177 )
Scope of Delivery: - Hammer drill Trijet Ultimate D.8,0mm Working-L.150mm L.210mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!
-
HELLER HELLER hammer drill Trijet Ultimate D.6,0mm Working-L.150mm L.210mm ( 4300000176 )
Fri, 10/17/2025
Scope of Delivery: - Hammer drill Trijet Ultimate D.6,0mm Working-L.150mm L.210mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!
CHF 17.07
-
HELLER HELLER hammer drill Trijet Ultimate D.10,0mm Working-L.100mm L.160mm ( 4300000174 )
Fri, 10/17/2025
Scope of Delivery: - Hammer drill Trijet Ultimate D.10,0mm Working-L.100mm L.160mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!
CHF 15.82
-
HELLER HELLER Hammer drill Trijet Ultimate D.8,0mm Working-L.100mm L.160mm ( 4300000173 )
Fri, 10/17/2025
Scope of Delivery: - Hammer drill Trijet Ultimate D.8,0mm Working-L.100mm L.160mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!
CHF 14.55
-
HELLER HELLER hammer drill Trijet Ultimate D.6,0mm Working-L.100mm L.160mm ( 4300000172 )
Fri, 10/17/2025
Scope of Delivery: - Hammer drill Trijet Ultimate D.6,0mm Working-L.100mm L.160mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!
CHF 13.27
-
HELLER HELLER Hammer drill Trijet Ultimate D.5,0mm Working-L.100mm L.160mm ( 4300000171 )
Fri, 10/17/2025
Scope of Delivery: - Hammer drill Trijet Ultimate D.5,0mm Working-L.100mm L.160mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!
CHF 13.03
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"