Neueste Artikel

Show previous products

• 

  Ruko RUKO countersink ULTIMATECUT DIN 335 C 90 ° nominal Ø 8.3 mm ( 8000422471 )

  Mon, 12/08/2025

  Scope of Delivery: - Countersink ULTIMATECUT DIN 335 C 90 ° nominal Ø 8.3 mm Product Description: The completely newly developed cutting edge geometry of the ULTIMATECUT from RUKO greatly reduces the axial and radial forces acting on the tool during the countersinking process. The specially developed, variable undercut ensures a very smooth countersinking process. This produces a precise, round and chatter-free countersink surface and therefore guarantees the best results. Specially developed chip space parameters, such as rake angle, transition radius and the extra wide flute, ensure optimum chip and heat removal and thus enable very high wear resistance. The new geometry also counteracts material welding and reduces countersinking forces enormously. Significantly less feed force is now required during the countersinking process. Materials can be machined at either very high or low cutting speeds without any loss of countersinking quality. The ULTIMATECUT achieves the best performance in almost all materials and applications. Technical Data: - Feed rate in steel up to 800 N: 0.15 mm/revFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 23.25

• 

  Ruko RUKO countersink ULTIMATECUT DIN 335 C 90 ° nominal Ø 31 mm ( 8000422469 )

  Mon, 12/08/2025

  Scope of Delivery: - Countersink ULTIMATECUT DIN 335 C 90 ° nominal Ø 31 mm Product Description: The completely newly developed cutting edge geometry of the ULTIMATECUT from RUKO greatly reduces the axial and radial forces acting on the tool during the countersinking process. The specially developed, variable undercut ensures a very smooth countersinking process. This produces a precise, round and chatter-free countersink surface and therefore guarantees the best results. Specially developed chip space parameters, such as rake angle, transition radius and the extra wide flute, ensure optimum chip and heat removal and thus enable very high wear resistance. The new geometry also counteracts material welding and reduces countersinking forces enormously. Significantly less feed force is now required during the countersinking process. Materials can be machined at either very high or low cutting speeds without any loss of countersinking quality. The ULTIMATECUT achieves the best performance in almost all materials and applications. Technical Data: - Feed rate in steel up to 800 N: 0.2 mm/revFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 49.45

• 

  Ruko RUKO countersink ULTIMATECUT DIN 335 C 90 ° nominal Ø 25 mm ( 8000422468 )

  Mon, 12/08/2025

  Scope of Delivery: - Countersink ULTIMATECUT DIN 335 C 90 ° nominal Ø 25 mm Product Description: The completely newly developed cutting edge geometry of the ULTIMATECUT from RUKO greatly reduces the axial and radial forces acting on the tool during the countersinking process. The specially developed, variable undercut ensures a very smooth countersinking process. This produces a precise, round and chatter-free countersink surface and therefore guarantees the best results. Specially developed chip space parameters, such as rake angle, transition radius and the extra wide flute, ensure optimum chip and heat removal and thus enable very high wear resistance. The new geometry also counteracts material welding and reduces countersinking forces enormously. Significantly less feed force is now required during the countersinking process. Materials can be machined at either very high or low cutting speeds without any loss of countersinking quality. The ULTIMATECUT achieves the best performance in almost all materials and applications. Technical Data: - Feed rate in steel up to 800 N: 0.2 mm/revFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 41.61

• 

  Ruko RUKO countersink ULTIMATECUT DIN 335 C 90 ° nominal Ø 23 mm ( 8000422467 )

  Mon, 12/08/2025

  Scope of Delivery: - Countersink ULTIMATECUT DIN 335 C 90 ° nominal Ø 23 mm Product Description: The completely newly developed cutting edge geometry of the ULTIMATECUT from RUKO greatly reduces the axial and radial forces acting on the tool during the countersinking process. The specially developed, variable undercut ensures a very smooth countersinking process. This produces a precise, round and chatter-free countersink surface and therefore guarantees the best results. Specially developed chip space parameters, such as rake angle, transition radius and the extra wide flute, ensure optimum chip and heat removal and thus enable very high wear resistance. The new geometry also counteracts material welding and reduces countersinking forces enormously. Significantly less feed force is now required during the countersinking process. Materials can be machined at either very high or low cutting speeds without any loss of countersinking quality. The ULTIMATECUT achieves the best performance in almost all materials and applications. Technical Data: - Feed rate in steel up to 800 N: 0.2 mm/revFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 38.65

• 

  Ruko RUKO countersink ULTIMATECUT DIN 335 C 90 ° nominal Ø 20.5 mm ( 8000422466 )

  Mon, 12/08/2025

  Scope of Delivery: - Countersink ULTIMATECUT DIN 335 C 90 ° nominal Ø 20.5 mm Product Description: The completely newly developed cutting edge geometry of the ULTIMATECUT from RUKO greatly reduces the axial and radial forces acting on the tool during the countersinking process. The specially developed, variable undercut ensures a very smooth countersinking process. This produces a precise, round and chatter-free countersink surface and therefore guarantees the best results. Specially developed chip space parameters, such as rake angle, transition radius and the extra wide flute, ensure optimum chip and heat removal and thus enable very high wear resistance. The new geometry also counteracts material welding and reduces countersinking forces enormously. Significantly less feed force is now required during the countersinking process. Materials can be machined at either very high or low cutting speeds without any loss of countersinking quality. The ULTIMATECUT achieves the best performance in almost all materials and applications. Technical Data: - Feed rate in steel up to 800 N: 0.2 mm/revFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 35.70

• 

  Ruko RUKO countersink ULTIMATECUT DIN 335 C 90 ° nominal Ø 19 mm ( 8000422465 )

  Mon, 12/08/2025

  Scope of Delivery: - Countersink ULTIMATECUT DIN 335 C 90 ° nominal Ø 19 mm Product Description: The completely newly developed cutting edge geometry of the ULTIMATECUT from RUKO greatly reduces the axial and radial forces acting on the tool during the countersinking process. The specially developed, variable undercut ensures a very smooth countersinking process. This produces a precise, round and chatter-free countersink surface and therefore guarantees the best results. Specially developed chip space parameters, such as rake angle, transition radius and the extra wide flute, ensure optimum chip and heat removal and thus enable very high wear resistance. The new geometry also counteracts material welding and reduces countersinking forces enormously. Significantly less feed force is now required during the countersinking process. Materials can be machined at either very high or low cutting speeds without any loss of countersinking quality. The ULTIMATECUT achieves the best performance in almost all materials and applications. Technical Data: - Feed rate in steel up to 800 N: 0.2 mm/revFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 32.77

• 

  Ruko RUKO countersink ULTIMATECUT DIN 335 C 90 ° nominal Ø 16.5 mm ( 8000422464 )

  Mon, 12/08/2025

  Scope of Delivery: - Countersink ULTIMATECUT DIN 335 C 90 ° nominal Ø 16.5 mm Product Description: The completely newly developed cutting edge geometry of the ULTIMATECUT from RUKO greatly reduces the axial and radial forces acting on the tool during the countersinking process. The specially developed, variable undercut ensures a very smooth countersinking process. This produces a precise, round and chatter-free countersink surface and therefore guarantees the best results. Specially developed chip space parameters, such as rake angle, transition radius and the extra wide flute, ensure optimum chip and heat removal and thus enable very high wear resistance. The new geometry also counteracts material welding and reduces countersinking forces enormously. Significantly less feed force is now required during the countersinking process. Materials can be machined at either very high or low cutting speeds without any loss of countersinking quality. The ULTIMATECUT achieves the best performance in almost all materials and applications. Technical Data: - Feed rate in steel up to 800 N: 0.2 mm/revFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 30.18

• 

  Ruko RUKO countersink ULTIMATECUT DIN 335 C 90 ° nominal Ø 15 mm ( 8000422463 )

  Mon, 12/08/2025

  Scope of Delivery: - Countersink ULTIMATECUT DIN 335 C 90 ° nominal Ø 15 mm Product Description: The completely newly developed cutting edge geometry of the ULTIMATECUT from RUKO greatly reduces the axial and radial forces acting on the tool during the countersinking process. The specially developed, variable undercut ensures a very smooth countersinking process. This produces a precise, round and chatter-free countersink surface and therefore guarantees the best results. Specially developed chip space parameters, such as rake angle, transition radius and the extra wide flute, ensure optimum chip and heat removal and thus enable very high wear resistance. The new geometry also counteracts material welding and reduces countersinking forces enormously. Significantly less feed force is now required during the countersinking process. Materials can be machined at either very high or low cutting speeds without any loss of countersinking quality. The ULTIMATECUT achieves the best performance in almost all materials and applications. Technical Data: - Feed rate in steel up to 800 N: 0.15 mm/revFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 27.77

• 

  Ruko RUKO countersink ULTIMATECUT DIN 335 C 90 ° nominal Ø 12.4 mm ( 8000422462 )

  Mon, 12/08/2025

  Scope of Delivery: - Countersink ULTIMATECUT DIN 335 C 90 ° nominal Ø 12.4 mm Product Description: The completely newly developed cutting edge geometry of the ULTIMATECUT from RUKO greatly reduces the axial and radial forces acting on the tool during the countersinking process. The specially developed, variable undercut ensures a very smooth countersinking process. This produces a precise, round and chatter-free countersink surface and therefore guarantees the best results. Specially developed chip space parameters, such as rake angle, transition radius and the extra wide flute, ensure optimum chip and heat removal and thus enable very high wear resistance. The new geometry also counteracts material welding and reduces countersinking forces enormously. Significantly less feed force is now required during the countersinking process. Materials can be machined at either very high or low cutting speeds without any loss of countersinking quality. The ULTIMATECUT achieves the best performance in almost all materials and applications. Technical Data: - Feed rate in steel up to 800 N: 0.15 mm/revFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 26.88

• 

  Ruko RUKO countersink ULTIMATECUT DIN 335 C 90 ° nominal Ø 10.4 mm ( 8000422461 )

  Mon, 12/08/2025

  Scope of Delivery: - Countersink ULTIMATECUT DIN 335 C 90 ° nominal Ø 10.4 mm Product Description: The completely newly developed cutting edge geometry of the ULTIMATECUT from RUKO greatly reduces the axial and radial forces acting on the tool during the countersinking process. The specially developed, variable undercut ensures a very smooth countersinking process. This produces a precise, round and chatter-free countersink surface and therefore guarantees the best results. Specially developed chip space parameters, such as rake angle, transition radius and the extra wide flute, ensure optimum chip and heat removal and thus enable very high wear resistance. The new geometry also counteracts material welding and reduces countersinking forces enormously. Significantly less feed force is now required during the countersinking process. Materials can be machined at either very high or low cutting speeds without any loss of countersinking quality. The ULTIMATECUT achieves the best performance in almost all materials and applications. Technical Data: - Feed rate in steel up to 800 N: 0.15 mm/revFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 23.63

• 

  Options

  Ruko RUKO Handgewindebohrersatz DIN 352 3-tlg.M 18xSteigung 2,5mm ( 8000422150 )

  Lieferumfang:Handgewindebohrersatz DIN 352 3-tlg.M 18xSteigung 2,5mmProduktbeschreibung:HSS · metrisches ISO-Gewinde · DIN 13 Blatt 1 · rechtsschneidend · Toleranzfeld ISO2 (6H) · für unlegierte und niedriglegierte Stähle bis 800 N/mm² Festigkeit, Temperguss und NE-Metalle Satz 3-teilig, bestehend aus Vor-, Mittel- und Fertigschneider Technische Daten: Schaft-Ø: 14mm Schneidstoff: HSS

  Read more less

  Pre-order

  CHF 35.87

  Options

• 

  Ruko RUKO thread cutting tool set M3-M4-M5-M6-M8-M10-M12 ( 8000421445 )

  Mon, 12/08/2025

  Scope of Delivery: - Gewindeschneidzeugsatz M3-M4-M5-M6-M8-M10-M12 - in metal case Product Description: HSS - M3-M12 - for through-hole threads and blind-hole threads - for unalloyed and low-alloy steels up to 800 N/mm² strength, malleable cast iron and non-ferrous metals consisting of: 1 set each of hand taps DIN 352 M3, M4, M5, M6, M8, M10, M12 1 set each of taps DIN EN 22568 M3, M4, M5, M6, M8, M10, M12 1 set each of die holders 20 x 5, 20 x 7, 25 x 9, 30 x 11, 38 x 14 mm 1 set each of adjustable tap wrench size 1+2 1 set each of screw end taps DIN EN 22568 M3, M4, M5, M6, M8, M10, M12 1 set each of screw end taps DIN EN 22568 M3, M4, M5, M6, M8, M10, M12 1 set each of adjustable tap wrench size 1+2 each 1 screwdriver, thread gauge each 1 core drill DIN 338 type N Ø 2.5/ 3.3/ 4.2/ 5/ 6.8/ 8.5/ 10.2 mm Technical Data: - Contents: 44 pieces - Cutting material: HSSFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 168.30

Show more products