Neueste Artikel
-
GANTER GANTER Kunststoff-Gelenkfuß GN 344 d1 100 mm, d2 M 12 mm l1 43 mm ( 4601002550 )
Lieferumfang:Kunststoff-Gelenkfuß GN 344 d1 100 mm, d2 M 12 mm l1 43 mmProduktbeschreibung:mit Mutter, mit Gummiauflage · die in der Tabelle angegebenen Werte der statischen Belastbarkeit sind Richtwerte, bei deren Überschreitung es zur bleibenden Verformung bzw. zum Bruch des Kunststofftellers kommen kann · Ausführung: Fuß Kunststoff Thermoplast (Polyamid PA), glasfaserverstärkt, schwarz, matt, temperaturbeständig bis 100 °C · Verstellspindel Stahl verzinkt, blau passiviert · Festigkeitsklasse 5.8 · Sechskantmutter ISO 4032: Stahl verzinkt, blau passiviert · Gummiauflage (NBR): 70 Shore A, schwarz weitere Ausführungen auf AnfrageTechnische Daten: l3: 24mm l2: 33mm l1: 43mm d1: 100mm d2: M 12mm
-
GANTER GANTER plastic articulated foot GN 344 d1 100 mm, d2 M 10 mm l1 43 mm ( 4601002547 )
Thu, 10/23/2025
Scope of Delivery: - Plastic articulated foot GN 344 d1 100 mm, d2 M 10 mm l1 43 mm Product Description: with nut, with rubber pad - The static load capacity values given in the table are guide values; if these are exceeded, permanent deformation or breakage of the plastic disc may occur The values given in the table for static load-bearing capacity are guide values which, if exceeded, can lead to permanent deformation or breakage of the plastic plate - Version: Plastic base Thermoplastic (polyamide PA), glass fibre reinforced, black, matt, temperature-resistant up to 100 °C - Adjusting spindle Galvanised steel, blue passivated - Strength class 5.8 - Hexagon nut ISO 4032: Galvanised steel, blue passivated - Rubber pad (NBR): 70 Shore A, black Other versions on request Technical Data: - l3: 24mm - l2: 33mm - l1: 43mm - d1: 100mm - d2: M 10mmFor commercial use, please observe the building regulations!
CHF 18.01
-
GANTER GANTER Adjustable clamping lever GN 300 d1 M 12 mm ( 4601000615 )
Thu, 10/23/2025
Scope of Delivery: - Adjustable clamping lever GN 300 d1 M 12 mm Product Description: are preferably used when the clamping range is limited and a certain clamping position is desired - by lifting (pulling) the handle, the serration is released and the clamping lever can be swivelled into the most favourable clamping position - when "released", the handle automatically locks into place again - handle body - die-cast zinc - threaded bush and retaining screw - steel, burnished further dimensions and colour variants on request Technical Data: - d4: 24mm - h2: 11mm - h4: 4mm - l2: -mm - l1: 92mm - h1: 43mm - d1: M 12mm - d3: 19mm - h3: 64mmFor commercial use, please observe the building regulations!
CHF 15.00
-
GANTER GANTER Adjustable clamping lever GN 300 d1 M 12 mm ( 4601000611 )
Thu, 10/23/2025
Scope of Delivery: - Adjustable clamping lever GN 300 d1 M 12 mm Product Description: are preferably used when the clamping range is limited and a certain clamping position is desired - by lifting (pulling) the handle, the serration is released and the clamping lever can be swivelled into the most favourable clamping position - when "released", the handle automatically locks into place again - handle body - die-cast zinc - threaded bush and retaining screw - steel, burnished further dimensions and colour variants on request Technical Data: - d4: 24mm - h2: 11mm - h4: 4mm - l2: 40mm - l1: 92mm - h1: 43mm - d1: M 12mm - d3: 19mm - h3: 64mmFor commercial use, please observe the building regulations!
CHF 16.04
-
GANTER GANTER Adjustable clamping lever GN 300 d1 M 10 mm ( 4601000583 )
Thu, 10/23/2025
Scope of Delivery: - Adjustable clamping lever GN 300 d1 M 10 mm Product Description: are preferably used when the clamping range is limited and a certain clamping position is desired - by lifting (pulling) the handle, the serration is released and the clamping lever can be swivelled into the most favourable clamping position - when "released", the handle automatically locks into place again - handle body - die-cast zinc - threaded bush and retaining screw - steel, burnished further dimensions and colour variants on request Technical Data: - d4: 21mm - h2: 8mm - h4: 4mm - l2: -mm - l1: 78mm - h1: 36mm - d1: M 10mm - d3: 16mm - h3: 54mmFor commercial use, please observe the building regulations!
CHF 13.44
-
GANTER GANTER Adjustable clamping lever GN 300 d1 M 10 mm ( 4601000581 )
Thu, 10/23/2025
Scope of Delivery: - Adjustable clamping lever GN 300 d1 M 10 mm Product Description: are preferably used when the clamping range is limited and a certain clamping position is desired - by lifting (pulling) the handle, the serration is released and the clamping lever can be swivelled into the most favourable clamping position - when "released", the handle automatically locks into place again - handle body - die-cast zinc - threaded bush and retaining screw - steel, burnished further dimensions and colour variants on request Technical Data: - d4: 21mm - h2: 8mm - h4: 4mm - l2: 63mm - l1: 78mm - h1: 36mm - d1: M 10mm - d3: 16mm - h3: 54mmFor commercial use, please observe the building regulations!
CHF 14.93
-
GANTER GANTER Adjustable clamping lever GN 300 d1 M 8 mm ( 4601000574 )
Thu, 10/23/2025
Scope of Delivery: - Adjustable clamping lever GN 300 d1 M 8 mm Product Description: are preferably used when the clamping range is limited and a certain clamping position is desired - by lifting (pulling) the handle, the serration is released and the clamping lever can be swivelled into the most favourable clamping position - when "released", the handle automatically locks into place again - handle body - die-cast zinc - threaded bush and retaining screw - steel, burnished further dimensions and colour variants on request Technical Data: - d4: 17.5mm - h2: 6.5mm - h4: 4mm - l2: -mm - l1: 63mm - h1: 31mm - d1: M 8mm - d3: 13,5mm - h3: 45mmFor commercial use, please observe the building regulations!
CHF 12.10
-
GANTER GANTER Adjustable clamping lever GN 300 d1 M 8 mm ( 4601000572 )
Thu, 10/23/2025
Scope of Delivery: - Adjustable clamping lever GN 300 d1 M 8 mm Product Description: are preferably used when the clamping range is limited and a certain clamping position is desired - by lifting (pulling) the handle, the serration is released and the clamping lever can be swivelled into the most favourable clamping position - when "released", the handle automatically locks into place again - handle body - die-cast zinc - threaded bush and retaining screw - steel, burnished further dimensions and colour variants on request Technical Data: - d4: 17.5mm - h2: 6.5mm - h4: 4mm - l2: 50mm - l1: 63mm - h1: 31mm - d1: M 8mm - d3: 13,5mm - h3: 45mmFor commercial use, please observe the building regulations!
CHF 12.92
-
GANTER GANTER Adjustable clamping lever GN 300 d1 M 6 mm ( 4601000546 )
Thu, 10/23/2025
Scope of Delivery: - Adjustable clamping lever GN 300 d1 M 6 mm Product Description: are preferably used when the clamping range is limited and a certain clamping position is desired - by lifting (pulling) the handle, the serration is released and the clamping lever can be swivelled into the most favourable clamping position - when "released", the handle automatically locks into place again - handle body - die-cast zinc - threaded bush and retaining screw - steel, burnished further dimensions and colour variants on request Technical Data: - d4: 13mm - h2: 4mm - h4: 3,5mm - l2: 32mm - l1: 45mm - h1: 24.5mm - d1: M 6mm - d3: 10mm - h3: 31mmFor commercial use, please observe the building regulations!
CHF 11.36
-
GANTER GANTER Adjustable clamping lever GN 300 d1 M 12 mm ( 4601000488 )
Thu, 10/23/2025
Scope of Delivery: - Adjustable clamping lever GN 300 d1 M 12 mm Product Description: are preferably used when the clamping range is limited and a certain clamping position is desired - by lifting (pulling) the handle, the serration is released and the clamping lever can be swivelled into the most favourable clamping position - when "released", the handle automatically locks into place again - handle body - die-cast zinc - threaded bush and retaining screw - steel, burnished further dimensions and colour variants on request Technical Data: - d4: 30mm - h2: 12mm - h4: 5mm - l2: 63mm - l1: 108mm - h1: 50.5mm - d1: M 12mm - d3: 23mm - h3: 75mmFor commercial use, please observe the building regulations!
CHF 20.54
-
GANTER GANTER Adjustable clamping lever GN 300.1 d1 M 12 mm ( 4601000478 )
Thu, 10/23/2025
Scope of Delivery: - Adjustable clamping lever GN 300.1 d1 M 12 mm Product Description: adjustable clamping levers GN 300.1 are preferably used when the clamping range is limited or a specific clamping position is required - the threaded insert is detachably connected to the handle by a serration - by lifting (pulling) the handle, the serration is released and the clamping lever can be swivelled into the most favourable clamping position - when released, the handle engages again automatically - handle body - die-cast zinc - threaded bush and retaining screw : stainless steel, 1.4305 other dimensions and colours available on request Technical Data: - d4: 24mm - h2: 11mm - h4: 4mm - l2: 40mm - l1: 92mm - h1: 43mm - d1: M 12mm - d3: 19mm - h3: 64mmFor commercial use, please observe the building regulations!
CHF 22.10
-
GANTER GANTER Adjustable clamping lever GN 300.1 d1 M 10 mm ( 4601000458 )
Thu, 10/23/2025
Scope of Delivery: - Adjustable clamping lever GN 300.1 d1 M 10 mm Product Description: adjustable clamping levers GN 300.1 are preferably used when the clamping range is limited or a specific clamping position is required - the threaded insert is detachably connected to the handle by a serration - by lifting (pulling) the handle, the serration is released and the clamping lever can be swivelled into the most favourable clamping position - when released, the handle engages again automatically - handle body - die-cast zinc - threaded bush and retaining screw : stainless steel, 1.4305 other dimensions and colours available on request Technical Data: - d4: 21mm - h2: 8mm - h4: 4mm - l2: -mm - l1: 78mm - h1: 36mm - d1: M 10mm - d3: 16mm - h3: 54mmFor commercial use, please observe the building regulations!
CHF 16.28
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"