Neueste Artikel

Show previous products

• 

  PFERD PFERD round brush RBU INOX ( 8000433050 ) Ø 80 mm wire thickness 0.15 mm

  Mon, 12/01/2025

  Scope of Delivery: - 1x PFERD round brush Ø 80 mm wire thickness 0.15 mm Product Description: for cleaning, derusting, smoothing, cleaning weld seams, light deburring and removing corrosion and paint - very good corrosion resistance with optimum service life - INOX trim blue for use on all stainless steels (INOX), such as V4A. Stainless steel wire (INOX) withstands temperatures up to 450 °C - Shank Ø 6 mm Technical Data: - Drive type: Drill, straight grinder, flexible shaft drive - Application recommendation: For best performance, use a tool drive with at least 300 watts. Please observe the recommended speeds. - Mounting system: Shank - Machinable materials: Stainless steel (INOX), titanium alloys, soft titanium alloys (tensile strength 500 N/mm²), titanium, aluminium, cobalt-based alloys, other non-ferrous metals, bronze, high-temperature materials, nickel-based alloys (e.g. Inconell and Hasteloy), hard non-ferrous metal, nickel or titanium-based superalloys - Machining tasks: Cleaning, deburring, derusting, removing annealing colours, removing oxide layers, paint stripping, roughening - Filament material: Stainless steel wire (INOX) - Length, filament: 19mm - Ø fill material: 0.15mm - Ø shaft: 6mm - RPM, opt., up to: 7800RPM - RPM, opt., from: 4800RPM - Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm. - Packaging: Industrial packaging - Advantages: Produces fine surfaces. Optimum adaptation to the contour of the workpieces thanks to high flexibility. Very good corrosion resistance. - RPM, max.: 12000RPM - Ø: 80 mm - Fill width: 15 mm - Fill length: 50 mm - Wire thickness: 0.15 mm - Material suitability INOX: very suitable - Brand: PFERD - Material: Stainless steel - Shank Ø: 6 mm - Material suitability lacquer: very suitablePlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 22.52

• 

  PFERD PFERD sanding sleeve ( 4144210052 ) D15xW30mm30 mm grit size 80 max. speed 36000 min-¹

  Mon, 12/01/2025

  Scope of Delivery: - 1x PFERD sanding sleeve D15xW30mm30 mm grit size 80 Product Description: Aluminium oxide A - for universal use from coarse to fine sanding - supplied without rubber backing Technical Data: - Drive type: Straight grinder, flexible shaft drive - Application recommendation: For best performance, use at a recommended cutting speed of 20-30 m/s. Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. For a secure fit of the abrasive sleeve, maintain the minimum speed of the abrasive sleeve carrier. To make it easy to change the sanding sleeves, turn them slightly clockwise to fit and remove them. Keep the abrasive sleeve carrier clamped in the tool drive. - Machinable materials: Steel materials with a hardness > 54 HRC, aluminium, malleable cast iron, brass, bronze, cast steel, cobalt-based alloys, copper, fibre-reinforced thermosets (GRP, CFRP), grey/spheroidal graphite cast iron (GG/GJL, GGG/GJS), stainless steel (INOX), steels up to 1,200 N/mm² (For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 65.86

• 

  Options

  PFERD PFERD sanding sleeve ( 4144210007 ) D10xW20mm20 mm grit size 80 max. speed 44000 min-¹

  Scope of Delivery: - 1x PFERD sanding sleeve D10xW20mm20 mm grit size 80 Product Description: Aluminium oxide A - for universal use from coarse to fine sanding - supplied without rubber backing Technical Data: - Drive type: Flexible shaft drive, straight grinder - Application recommendation: For easy replacement of the sanding sleeves, pull them on and off with a slight clockwise rotation. Keep the abrasive sleeve holder clamped in the tool drive. Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. For best performance, use at a recommended cutting speed of 20-30 m/s. For a secure fit of the abrasive sleeve, observe the minimum speed of the abrasive sleeve holder. - Machinable materials: Grey/spheroidal cast iron (GG/GJL, GGG/GJS), aluminium, malleable cast iron, brass, cobalt-based alloys, copper, bronze, hardened, tempered steels over 1,200 N/mm² ( 54 HRC, steels up to 1,200 N/mm² (For commercial use, please observe the building regulations!).For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  CHF 65.86

  Options

• 

  PFERD PFERD round brush RBU ST ( 8000433021 ) Ø 70 mm wire thickness 0.3 mm

  Mon, 12/01/2025

  Scope of Delivery: - 1x PFERD round brush Ø 70 mm wire thickness 0.3 mm Product Description: for cleaning, derusting, smoothing, cleaning weld seams, light deburring and removing corrosion and paint - steel wire trim material has high tensile and flexural fatigue strength - ensures optimum wear of the wire and a long service life, even in extreme brushing applications Steel wire can withstand temperatures up to 300 °C. Shank Ø 6 mm Technical Data: - Drive type: Flexible shaft drive, drilling machine, straight grinder - Application recommendation: Please observe the recommended speeds. For best performance, use a tool drive with at least 300 watts. - Mounting system: Shank - Machinable materials: Wood, thermoplastics, steel, cast steel, elastomers, thermosets, cast iron - Machining tasks: Deburring, derusting, removing oxide layers, paint stripping, roughening, cleaning - Filament material: Steel wire (ST) - Length, filament: 19mm - Ø fill material: 0.3mm - Ø shank: 6mm - RPM, opt., up to: 11300RPM - RPM, opt., from: 7500RPM - Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm. - Packaging: Industrial packaging - Advantages: Produces fine surfaces. Long tool life thanks to the use of PFERD special wire. Optimum adaptation to the contour of the workpieces thanks to high flexibility. - RPM, max.: 15000RPM - Ø: 70 mm - Fill width: 15 mm - Fill length: 50 mm - Wire thickness: 0.3 mm - Material suitability cast iron: very suitable - Material suitability steel: very suitable - Brand: PFERD - Material: Steel - Shank Ø: 6 mm - Material suitability wood: very suitable - Material suitability plastic: very well suitedFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 13.61

• 

  PFERD PFERD round brush RBU ST ( 8000433012 ) Ø 30 mm wire thickness 0.2 mm

  Mon, 12/01/2025

  Scope of Delivery: - 1x PFERD round brush Ø 30 mm wire thickness 0.2 mm Product Description: for cleaning, derusting, smoothing, cleaning weld seams, light deburring and removing corrosion and paint - steel wire trim material has high tensile and flexural fatigue strength - ensures optimum wear of the wire and a long service life, even in extreme brushing applications Steel wire can withstand temperatures up to 300 °C. Shank Ø 6 mm Technical Data: - Drive type: Straight grinder, drilling machine, flexible shaft drive - Application recommendation: Please observe the recommended speeds. For best performance, use a tool drive with at least 300 watts. - Mounting system: Shank - Machinable materials: Thermoplastics, cast iron, thermosets, steel, cast steel, wood, elastomers - Machining tasks: Paint stripping, cleaning, deburring, removing oxide layers, roughening, rust removal - Filament material: Steel wire (ST) - Length, filament: 7mm - Ø fill material: 0.2mm - Ø shank: 6mm - RPM, opt., up to: 15000RPM - RPM, opt., from: 10000RPM - Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm. - Packaging: Industrial packaging - Advantages: Long tool life thanks to the use of PFERD special wire. Produces fine surfaces. Optimum adaptation to the contour of the workpieces thanks to high flexibility. - RPM, max.: 20000RPM - Ø: 30 mm - Fill width: 9 mm - Fill length: 42 mm - Wire thickness: 0.2 mm - Material suitability cast iron: very suitable - Material suitability steel: very suitable - Brand: PFERD - Material: Steel - Shank Ø: 6 mm - Material suitability wood: very suitable - Material suitability plastic: very well suitedFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 12.71

• 

  PFERD PFERD round brush RBU INOX ( 8000433037 ) Ø 30 mm wire thickness 0.2 mm

  Mon, 12/01/2025

  Scope of Delivery: - 1x PFERD round brush Ø 30 mm wire thickness 0.2 mm Product Description: for cleaning, derusting, smoothing, cleaning weld seams, light deburring and removing corrosion and paint - very good corrosion resistance with optimum service life - INOX trim blue for use on all stainless steels (INOX), such as V4A. Stainless steel wire (INOX) withstands temperatures up to 450 °C - Shank Ø 6 mm Technical Data: - Drive type: Straight grinder, flexible shaft drive, drill - Application recommendation: For best performance, use a tool drive with at least 300 watts. Please observe the recommended speeds. - Mounting system: Shank - Machinable materials: High temperature materials, nickel-based alloys (e.g. Inconell and Hasteloy), aluminium, bronze, hard non-ferrous metal, cobalt-based alloys, nickel or titanium-based superalloys, other non-ferrous metals, soft titanium alloys (tensile strength 500 N/mm²), stainless steel (INOX), titanium, titanium alloys - Machining tasks: Cleaning, roughening, paint stripping, removing oxide layers, removing annealing colours, derusting, deburring - Filament material: Stainless steel wire (INOX) - Length, filament: 7mm - Ø fill material: 0.2mm - Ø shank: 6mm - RPM, opt., up to: 13000RPM - RPM, opt., from: 8000RPM - Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm. - Packaging: Industrial packaging - Advantages: Optimum adaptation to the contour of the workpieces thanks to high flexibility. Produces fine surfaces. Very good corrosion resistance. - RPM, max.: 20000RPM - Ø: 30 mm - Fill width: 9 mm - Filament length: 42 mm - Wire thickness: 0.2 mm - Material suitability INOX: very suitable - Brand: PFERD - Material: Stainless steel - Shank Ø: 6 mm - Material suitability lacquer: very suitablePlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 14.42

• 

  Options

  PFERD PFERD round brush RBU INOX ( 8000433049 ) Ø 80 mm wire thickness 0.2 mm

  Scope of Delivery: - 1x PFERD round brush Ø 80 mm wire thickness 0.2 mm Product Description: for cleaning, derusting, smoothing, cleaning weld seams, light deburring and removing corrosion and paint - very good corrosion resistance with optimum service life - INOX trim blue for use on all stainless steels (INOX), such as V4A. Stainless steel wire (INOX) withstands temperatures up to 450 °C - Shank Ø 6 mm Technical Data: - Drive type: Flexible shaft drive, straight grinder, drilling machine - Application recommendation: Please observe the recommended speeds. For best performance, use a tool drive with at least 300 watts. - Mounting system: Shank - Machinable materials: Stainless steel (INOX), cobalt-based alloys, bronze, hard non-ferrous metals, high-temperature materials, other non-ferrous metals, titanium, titanium alloys, aluminium, nickel or titanium-based superalloys, nickel-based alloys (e.g. Inconell and Hasteloy), soft titanium alloys (tensile strength 500 N/mm²) - Machining tasks: Removing oxide layers, removing annealing colours, derusting, deburring, cleaning, paint stripping, roughening - Filament material: Stainless steel wire (INOX) - Length, filament: 19mm - Ø fill material: 0.2mm - Ø shank: 6mm - RPM, opt., up to: 7800RPM - RPM, opt., from: 4800RPM - Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm. - Packaging: Industrial packaging - Advantages: Optimum adaptation to the contour of the workpieces thanks to high flexibility. Produces fine surfaces. Very good corrosion resistance. - RPM, max.: 12000RPM - Ø: 80 mm - Fill width: 10 mm - Filament length: 50 mm - Wire thickness: 0.2 mm - Material suitability INOX: very suitable - Brand: PFERD - Material: Stainless steel - Shank Ø: 6 mm - Material suitability lacquer: very suitablePlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  CHF 20.17

  Options

• 

  Options

  PFERD PFERD round brush RBU INOX ( 8000433048 ) Ø 80 mm wire thickness 0.2 mm

  Scope of Delivery: - 1x PFERD round brush Ø 80 mm wire thickness 0.2 mm Product Description: for cleaning, derusting, smoothing, cleaning weld seams, light deburring and removing corrosion and paint - very good corrosion resistance with optimum service life - INOX trim blue for use on all stainless steels (INOX), such as V4A. Stainless steel wire (INOX) withstands temperatures up to 450 °C - Shank Ø 6 mm Technical Data: - Drive type: Drill, straight grinder, flexible shaft drive - Application recommendation: Please observe the recommended speeds. For best performance, use a tool drive with at least 300 watts. - Mounting system: Shank - Machinable materials: Aluminium, bronze, cobalt-based alloys, hard non-ferrous metals, high-temperature materials, nickel-based alloys (e.g. Inconell and Hasteloy), stainless steel (INOX), other non-ferrous metals, titanium, titanium alloys, nickel or titanium-based superalloys, soft titanium alloys (tensile strength 500 N/mm²) - Machining tasks: Rust removal, cleaning, removing oxide layers, paint stripping, roughening, deburring, removing temper colours - Filament material: Stainless steel wire (INOX) - Length, filament: 10mm - Ø fill material: 0.2mm - Ø shank: 6mm - RPM, opt., up to: 7800RPM - RPM, opt., from: 4800RPM - Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm. - Packaging: Industrial packaging - Advantages: Very good corrosion resistance. Produces fine surfaces. Optimum adaptation to the contour of the workpieces due to high flexibility. - RPM, max.: 12000RPM - Ø: 80 mm - Fill width: 4 mm - Fill length: 41 mm - Wire thickness: 0.2 mm - Material suitability INOX: very suitable - Brand: PFERD - Material: Stainless steel - Shank Ø: 6 mm - Material suitability lacquer: very suitablePlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  CHF 27.57

  Options

• 

  PFERD PFERD round brush RBG ( 8000433112 ) Ø 125 mm wire thickness 0.5 mm

  Mon, 12/01/2025

  Scope of Delivery: - 1x PFERD round brush Ø 125 mm wire thickness 0.5 mm Product Description: knotted wire - aggressive brush - suitable for heavy-duty brushing work in metal construction such as descaling, derusting, deburring, cleaning weld seams and removing adhesive residue - 22.2 mm Ø hole Technical Data: - Drive type: Angle grinder, straight grinder, flexible shaft drive - Application recommendation: Please observe the recommended speeds. For optimum results, use on powerful angle grinders. - Machinable materials: Steel, cast steel, cast iron - Machining tasks: Weld seam processing, cleaning, deburring, derusting, descaling, removing oxide layers, root seam processing, paint stripping, fillet weld processing - Trimming material: Steel wire (ST) - Width: 12mm - RPM, opt., up to: 12500RPM - RPM, opt., from: 5500RPM - Packaging: POS packaging - Advantages: Long service life thanks to the use of PFERD special wire. Aggressive brushing effect due to high rigidity of the wire tufts. - Ø: 125 mm - Fill width: 12 mm - Fill length: 28 mm - Wire thickness: 0.5 mm - Number of tufts: 24 - max. speed: 12500 min-¹ - Content: 1 pc. - Material suitability cast iron: very suitable - Bore: 22.2 mm - Material suitability steel: very suitable - Brand: PFERD - Material: SteelPlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 22.57

• 

  PFERD PFERD round brush RBU INOX ( 8000433046 ) Ø 70 mm wire thickness 0.15 mm

  Mon, 12/01/2025

  Scope of Delivery: - 1x PFERD round brush Ø 70 mm wire thickness 0.15 mm Product Description: for cleaning, derusting, smoothing, cleaning weld seams, light deburring and removing corrosion and paint - very good corrosion resistance with optimum service life - INOX trim blue for use on all stainless steels (INOX), such as V4A. Stainless steel wire (INOX) withstands temperatures up to 450 °C - Shank Ø 6 mm Technical Data: - Drive type: Flexible shaft drive, drill, straight grinder - Application recommendation: For best performance, use a tool drive with at least 300 watts. Please observe the recommended speeds. - Mounting system: Shank - Machinable materials: Bronze, titanium, cobalt-based alloys, hard non-ferrous metals, high-temperature materials, other non-ferrous metals, nickel or titanium-based superalloys, soft titanium alloys (tensile strength 500 N/mm²), stainless steel (INOX), titanium alloys, aluminium, nickel-based alloys (e.g. Inconell and Hasteloy) - Machining tasks: Removing annealing colours, roughening, cleaning, deburring, removing oxide layers, derusting, paint stripping - Filament material: Stainless steel wire (INOX) - Length, filament: 19mm - Ø fill material: 0.15mm - Ø shaft: 6mm - RPM, opt., up to: 9800RPM - RPM, opt., from: 6000RPM - Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm. - Packaging: Industrial packaging - Advantages: Optimum adaptation to the contour of the workpieces thanks to high flexibility. Very good corrosion resistance. Produces fine surfaces. - RPM, max.: 15000RPM - Ø: 70 mm - Fill width: 15 mm - Filament length: 50 mm - Wire thickness: 0.15 mm - Material suitability INOX: very suitable - Brand: PFERD - Material: Stainless steel - Shank Ø: 6 mm - Material suitability lacquer: very suitablePlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 21.87

• 

  Options

  PFERD PFERD round brush POS RBG 12512 ( 8000433126 ) Ø 125 mm wire thickness 0.5 mm

  Scope of Delivery: - 1x PFERD round brush Ø 125 mm wire thickness 0.5 mm Product Description: In order to fulfil the special requirements for processing stainless steel (INOX), PFERD uses wire grade 1.4310 (V2A) for all INOX brushes. Practical experience from the industrial environment confirms that it has very good corrosion resistance with an optimum service life. All PFERD brushes with INOX filaments are labelled blue and are suitable for use on all stainless steels (INOX) - such as V4A. Wire grade 1.4310 tends to exhibit ferromagnetic behaviour when work hardened, i.e. it is attracted by magnets, due to a change in the microstructure caused by deformation, e.g. during wire drawing. This has no influence on the quality and corrosion resistance of the INOX trim. It retains its corrosion-resistant properties. Stainless steel wire (INOX) can withstand temperatures of up to 450 °C. Aggressive brush. Suitable for heavy-duty brushing work in metal construction such as descaling - derusting - deburring - cleaning weld seams and removing adhesive residue and weld spatter. Technical Data: - Drive type: Straight grinder, angle grinder, flexible shaft drive - Application recommendation: Please observe the recommended speeds. For optimum results, use on powerful angle grinders. - Number of teeth: 24 pieces - Mounting system: Bore - Machinable materials: Nickel or titanium-based superalloys, titanium, stainless steel (INOX), soft titanium alloys (tensile strength 500 N/mm²), other non-ferrous metals, titanium alloys, nickel-based alloys (e.g. Inconell and Hasteloy), high-temperature materials, hard non-ferrous metals, cobalt-based alloys, bronze, aluminium - Machining tasks: Deburring, fillet weld processing, weld seam processing, root seam processing, paint stripping, removing oxide layers, removing tarnish, descaling, derusting, cleaning - Filament material: Stainless steel wire (INOX) - Length, filament: 28mm - Ø fill material: 0.5mm - Ø bore: 22.2mm - RPM, opt., up to: 12500RPM - RPM, opt., from: 4400RPM - Packaging: POS packaging - Advantages: Very good corrosion resistance. The brush is degreased and leaves no oil residue on the workpiece. Aggressive brushing effect due to high rigidity of the wire tufts. - RPM, max.: 12500RPM - Ø: 125 mm - Filament width: 12 mm - Wire thickness: 0.5 mm - Material suitability INOX: very suitable - Material suitability aluminium: very suitable - Brand: PFERD - Material: Stainless steel - Material suitability lacquer: very suitableFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  CHF 36.33

  Options

• 

  Options

  PFERD PFERD round brush POS RBG 12512 ( 8000433125 ) Ø 125 mm wire thickness 0.35 mm

  Scope of Delivery: - 1x PFERD round brush Ø 125 mm wire thickness 0.35 mm Product Description: for heavy-duty brushing work in metal construction such as descaling, derusting, deburring, cleaning weld seams and removing adhesive residue and weld spatter - very good corrosion resistance with optimum service life - INOX trim blue for use on all stainless steels (INOX), such as V4A. Stainless steel wire (INOX) withstands temperatures up to 450 °C - Bore 22.2 mm Ø Technical Data: - Drive type: Straight grinder, flexible shaft drive, angle grinder - Application recommendation: Please observe the recommended speeds. For optimum results, use on powerful angle grinders. - Quantity, braids: 24 pieces - Mounting system: Bore - Machinable materials: Nickel or titanium-based superalloys, aluminium, cobalt-based alloys, hard non-ferrous metals, nickel-based alloys (e.g. Inconell and Hasteloy), titanium alloys, bronze, stainless steel (INOX), other non-ferrous metals, soft titanium alloys (tensile strength 500 N/mm²), high-temperature materials, titanium - Machining tasks: Descaling, fillet weld processing, weld seam processing, root seam processing, paint stripping, tarnish removal, cleaning, rust removal, deburring, oxide layer removal - Filament material: Stainless steel wire (INOX) - Length, filament: 28mm - Ø fill material: 0.35mm - Ø bore: 22.2mm - RPM, opt., up to: 12500RPM - RPM, opt., from: 4400RPM - Packaging: POS packaging - Advantages: The brush is degreased and leaves no oil residue on the workpiece. Aggressive brushing effect due to high rigidity of the wire tufts. Very good corrosion resistance. - RPM, max.: 12500RPM - Ø: 125 mm - Filament width: 12 mm - Wire thickness: 0.35 mm - Material suitability INOX: very suitable - Material suitability aluminium: very suitable - Brand: PFERD - Material: Stainless steel - Material suitability lacquer: very suitableFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  CHF 38.71

  Options

Show more products