Scope of Delivery:
- Quick-release nut DT3559 M14
Product Description:
Suitable for all angle grinders with M14 drive spindle - No additional tools required to change discs - Can also be opened with a face spanner if required - For attaching cutting and grinding discs
Technical Data:
- nanFor commercial use, please observe the building regulations!
Lieferumfang:- 1x Festool QRN-AGC 18 M14 Schnellspannmutter für AGC 18 WinkelschleiferProduktbeschreibung:Durch die Schnellspannmutter QRN-AGC 18 ist ein werkzeugloses Einspannen von Schleifwerkzeugen möglich. Die Schnellspannmutter befestigt mit dem Gegenstück Spannflansch BF-AGC das Werkzeug sicher und fest am Winkelschleifer. Die ausgesprochen gute Qualität wird durch den Festool Qualitätsstandard gewährleistet.Technische Daten:Herstellernummer: 204927Kompatibel mit AGC 18für Scheiben-Ø 115-125 mmBei gewerblicher Nutzung beachten Sie bitte die Bauvorschriften!
Scope of Delivery:
- T-slot nut (DIN 508) Factory standard T-slot 16 mm M14
Product Description:
hardened and tempered - strength class 10 - full load capacity of the nut for T-slot can only be achieved if the screw connection is made over the entire thread length
Technical Data:
- A: 15.7mm
- D: M14
- K: 9mm
- E: 25mm
- H: 18mmFor commercial use, please observe the building regulations!
Scope of Delivery:
- Hexagon nut DIN 6331 M20 Width across flats 30 mm
Product Description:
with collar - hardened and tempered - strength class 10 - forged
Technical Data:
- Width across flats: 30mmFor commercial use, please observe the building regulations!
Scope of Delivery:
- Hexagon nut DIN 6330B M8 Width across flats 13 mm
Product Description:
hardened and tempered - strength class 10 - with spherical end can be used directly with tapered socket DIN 6319D or G - with flat end can be used with discs DIN 6340
Technical Data:
- Width across flats: 13mmFor commercial use, please observe the building regulations!
Scope of Delivery:
- T-slot nut DIN 508 T-slot 22 mm M20
Product Description:
hardened and tempered - strength class 10 - full load capacity of the nut for T-slot can only be achieved if the screw connection is made over the entire thread length
Technical Data:
- A: 21.7mm
- D: M20
- K: 14mm
- E: 35mm
- H: 28mmFor commercial use, please observe the building regulations!
Scope of Delivery:
- T-slot nut no. 510 T-slot 18 mm M16
Product Description:
rhombic - hardened and tempered - due to the reduced contact surface in the T-slot, the load capacity is lower than with the comparable DIN 508 sizes - Special product advantages: Rhombus T-nuts can be inserted into the T-slot from above. Particularly useful for long T-slots or if the machine table layout does not allow clamping screws or T-nuts to be inserted from the side
Technical Data:
- A: 17.7mm
- D: M16
- K: 10mm
- E: 28mm
- H: 20mmFor commercial use, please observe the building regulations!
Scope of Delivery:
- T-slot nut DIN 508 T-slot 36 mm M30
Product Description:
hardened and tempered - strength class 10 - full load capacity of the nut for T-slot can only be achieved if the screw connection is made over the entire thread length
Technical Data:
- A: 35.6mm
- D: M30
- K: 22mm
- E: 54mm
- H: 44mmFor commercial use, please observe the building regulations!
