Multifunktionsgeräte

Scope of Delivery: - 1x Makita brush cutter / scythe attachment EM 404 MP ( 198768-1 ) for DUX 60 cordless multifunction drive Product Description: The Makita EM 404 MP scythe attachment for the Makita DUX 60 Z 2x 18V ( 36V ) is the perfect attachment for cutting grass, weeds, undergrowth and low vegetation in conjunction with an approved drive unit. All insert tools on the Makita DUX 60 Z can be changed completely without tools. Two 18 volt batteries (not included) provide the tool with an extremely high level of power. It is recommended to always use two of the same batteries. Makita has equipped the DUX 60 multifunctional drive with the latest technology, so it is optimally protected against dust and splash water with Xtreme Protect Technology ( XTP ). The powerful motor has Active Feedback sensing technology, which stops the device immediately if it jams. The Makita brush cutter / scythe attachment is the perfect solution for efficient and effortless cutting of grass, weeds etc., even in hard-to-reach corners. This attachment is only approved for use with the following appliances: EX2650 LH, DUX60. Technical Data: - Dimensions: Length x width x height ( without cutting tool ) 876 mm x 392 mm x 225mm - Net weight: 1.5 kg - Cutting diameter: metal blade 230 mm, nylon thread head 420 mm - Gear ratio: 13:21 - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita EM 408 MP brush cutter / scythe attachment Product Description: The Makita EM 408 MP scythe attachment is the ideal addition for versatile mowing work and impresses with its flexible application options. Thanks to the split protective cover, it can be used with a plastic cutter head (Ø 255 mm), a metal cutting blade (Ø 230 mm) or a string head (Ø 300 mm). This makes the attachment perfect for various cutting tasks - from fine lawn edges to dense undergrowth. The scope of delivery includes a 2-thread Tap&Go 2.0 mm head, which enables quick tracking of the thread by lightly tapping it on the ground, as well as a 17 mm socket spanner for easy installation. Technical Data: - Manufacturer: Makita - Manufacturer's description: EM 408 MP - Manufacturer number: 191N31-5 - Cutting width: 300 mm - Product dimensions (L x W x H): 920 x 320 x 196 mm - Tool holder: M10 x 1.25 LH - Idle speed (with DUX18): 0-5000 / 7100 min-¹ - Idle speed (with DUX60): 0-4200 / 6000 / 7100 min-¹ - Idle speed (with UX01G): 0-4200 / 6000 / 7100 min-¹ - Product weight: 1.4 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita hedge trimmer attachment EN 400 MP ( 195730-7 ) Product Description: The Makita hedge trimmer attachment provides a convenient alternative to a simple hedge trimmer. This attachment simply needs to be attached to the cordless multifunctional drive and is ready for use in just a few seconds. Tool-free assembly is a major advantage. Large, demanding hedges and their topiary are child's play thanks to the 535 mm long cutting edge. The possible angles of 135° (90° upwards, 45° downwards) ensure universal application. Makita's standardised workmanship promises a long service life. Technical Data: - Length: 53 cm - Models: DUX 60, BUX 361, EX2650 LH - Material: Stainless steel - Dimensions ( L x W x H ): 1500 x 130 x 111 mm - Weight: 2.4 kg - Cutting length: 535 mm - Cutting angle: 135° ( 90° upwards, 45° downwards ) - Gear ratio: 1/4 - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita EE400MP lawn edging attachment Product Description: The Makita EE400MP lawn edging attachment is the ideal companion when it comes to clear lawn edging work. Thanks to the metal protective cover, the necessary safety is ensured. The EE400MP also has a single-wheel guide aid. Thanks to the metal blade, which has a diameter of 203 mm, most applications are covered. Makita's standardised workmanship promises a long service life. Technical Data: - Manufacturer: Makita - Manufacturer's description: EE400MP - Saw blade diameter: 203 mm - Product weight: 2.8 kg - Product dimensions (L x W x H): 878 x 131 x 291 mm - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Milwaukee M18 FOPH-BA blower attachment Product Description: The Milwaukee M18 FOPH-BA blower attachment is the perfect solution for efficient and thorough outdoor cleaning. With an impressive air flow rate of up to 14.2 m³/min and a speed of 193 km/h, it effortlessly removes leaves, gravel and grit. Its ability to clean tight corners and hard-to-reach areas is particularly practical. Even materials under ledges or other objects can be easily removed with this attachment. The Milwaukee M18 FOPH-BA blower attachment is also compatible with flat and conical nozzle attachments, giving you maximum flexibility depending on your needs. The attachment reaches full throttle in less than a second, delivering instant, powerful performance. Thanks to its compatibility with the MILWAUKEE® M18 FUEL™ Outdoor Power Head and the QUIK-LOK™ attachment system, you can quickly and easily attach the attachment to your existing tool. Technical Data: - Manufacturer: Milwaukee - Manufacturer's description: 18 FOPH-BA - Manufacturer's number: 4932492668 - Blowing force (N): 12.2 - Air speed (km/h): 0 - 193 - Air volume stage 1: 0 - 14.2 - Weight [without battery] [kg]: 2.1 - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita hedge trimmer attachment EN 401 MP ( 196256-2 ) Product Description: The Makita hedge trimmer attachment provides a convenient alternative to a simple hedge trimmer. This attachment simply needs to be attached to the cordless multifunctional drive and is ready for use in just a few seconds. Tool-free assembly is a major advantage. The 535 mm long cutting edge (490 mm cutting length) makes light work of large, demanding hedges and their topiary. The impact protection at the tip of the blade prevents damage from contact with walls, earth, etc.. The possible angles of 135° ( 90° upwards, 45° downwards ) ensure universal application. Makita's standardised workmanship promises a long service life. Technical Data: - Total length: 53 cm - Cutting length: 49 cm - Models: DUX 60, BUX 361, EX2650 LH - Material: Stainless steel - Dimensions ( L x W x H ): 1500 x 130 x 111 mm - Weight: 2.4 kg - Cutting length: 535 mm - Cutting angle: 135° ( 90° upwards, 45° downwards ) - Gear ratio: 1/4 - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less