Measuring and Testing equipment
-
KÄFER KÄFER depth measuring bridge TB 80 Bridge length 80 mm Height 16 mm ( 4000851318 )
Sat, 08/30/2025
Scope of Delivery: - Depth measuring bridge TB 80 Bridge length 80 mm Height 16 mm Product Description: for dial gauge - with flat measuring surface - suitable for depth, step and distance measurements etc. - Measuring bridge hardened steel - matt chrome-plated - measuring surfaces lapped - collet chuck 8 mm H7 - for use with dial gauge, anti-clockwise Part no. 4000 851 401 Technical Data: - Design: flat measuring surface - Height: 16mmFor commercial use, please observe the building regulations!
CHF 73.75
-
KÄFER KÄFER depth measuring bridge TB 66 for Ø 10-100 mm ( 4000851289 )
Sat, 08/30/2025
Scope of Delivery: - Depth measuring bridge TB 66 for Ø 10-100 mm Product Description: for dial gauge - prismatic shape - suitable for measurements on pipes and shafts - for use with dial gauge counterclockwise Part No. 4000 851 401 Technical Data: - Design: Prism shapeFor commercial use, please observe the building regulations!
CHF 112.58
-
HELIOS PREISSER HELIOS PREISSER Caliper DIN 862 DIGI-MET(R) IP67 200 mm ( 4000851116 )
Scope of Delivery: - Caliper DIN 862 DIGI-MET® IP67 200 mm - Delivery incl. test report and battery (CR2032) Product Description: digital - IP67 - with integrated interface for radio transmission - measuring system insensitive to dust and temporary immersion in water - housing with high chemical resistance - with locking screw and cross tips - LCD display 11 mm Functions: On/off switch - QuickStart electronics - QuickLock function for one-time zero setting and key lock against unintentional key operation - Zero setting at any point - PRESET function (measured value presetting) Technical Data: - subject to inspection: yesNote on the disposal of batteries and rechargeable batteries - As we sell batteries and accumulators or devices containing batteries and accumulators, we are obliged under the German Battery Act (BattG) to draw your attention to the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!
-
KÄFER KÄFER depth measuring bridge TB 50 Bridge length 50 mm Height 16 mm ( 4000851317 )
Sat, 08/30/2025
Scope of Delivery: - Depth measuring bridge TB 50 Bridge length 50 mm Height 16 mm Product Description: for dial gauge - with flat measuring surface - suitable for depth, step and distance measurements etc. - Measuring bridge hardened steel - matt chrome-plated - measuring surfaces lapped - collet chuck 8 mm H7 - for use with dial gauge, anti-clockwise Part no. 4000 851 401 Technical Data: - Design: flat measuring surface - Height: 16mmFor commercial use, please observe the building regulations!
CHF 73.75
-
HELIOS PREISSER HELIOS PREISSER depth caliper 300 mm ( 4000851192 )
Sat, 08/30/2025
Scope of Delivery: - Depth caliper 300 mm Product Description: measuring rail offset at 2 angles - width, distance and depth measurement - with locking screw - vernier and scale matt chrome-plated - graduation and scaling highly accurate thanks to laser marking - measuring rail has double graduation and can be repositioned Calibration on request and at extra charge. Technical Data: - Measuring bar cross-section: 8 x 3mm - subject to testing: yesFor commercial use, please observe the building regulations!
CHF 122.65
-
HELIOS PREISSER HELIOS PREISSER depth caliper 200 mm ( 4000851191 )
Sat, 08/30/2025
Scope of Delivery: - Depth caliper 200 mm Product Description: measuring rail offset at 2 angles - width, distance and depth measurement - with locking screw - vernier and scale matt chrome-plated - graduation and scaling highly accurate thanks to laser marking - measuring rail has double graduation and can be repositioned Calibration on request and at extra charge. Technical Data: - Measuring bar cross-section: 8 x 3mm - subject to testing: yesFor commercial use, please observe the building regulations!
CHF 109.69
-
HELIOS PREISSER HELIOS PREISSER depth caliper DIN 862 500 mm ( 4000851187 )
Sat, 08/30/2025
Scope of Delivery: - Depth caliper DIN 862 500 mm - Delivery incl. test report Product Description: straight measuring bar - with locking screw - vernier and scale matt chrome-plated - graduation and scaling highly accurate thanks to laser labelling Technical Data: - A: 12mm - C: 4mm - Measuring bar cross-section: 12 x 4mm - B: 4mm - subject to inspection: yesFor commercial use, please observe the building regulations!
CHF 182.47
-
HELIOS PREISSER HELIOS PREISSER depth caliper DIN 862 300 mm ( 4000851186 )
Sat, 08/30/2025
Scope of Delivery: - Depth caliper DIN 862 300 mm - Delivery incl. test report Product Description: straight measuring bar - with locking screw - vernier and scale matt chrome-plated - graduation and scaling highly accurate thanks to laser labelling Technical Data: - A: 12mm - C: 4mm - Measuring bar cross-section: 12 x 4mm - B: 4mm - subject to inspection: yesFor commercial use, please observe the building regulations!
CHF 121.66
-
HELIOS PREISSER HELIOS PREISSER depth caliper DIN 862 200 mm ( 4000851185 )
Sat, 08/30/2025
Scope of Delivery: - Depth caliper DIN 862 200 mm - Delivery incl. test report Product Description: straight measuring bar - with locking screw - vernier and scale matt chrome-plated - graduation and scaling highly accurate thanks to laser labelling Technical Data: - A: 8mm - C: 3.5mm - Measuring bar cross-section: 8 x 3mm - B: 3mm - subject to testing: yesFor commercial use, please observe the building regulations!
CHF 101.73
-
HELIOS PREISSER HELIOS PREISSER workshop calliper gauge DIN 862 300 mm ( 4000851124 )
Scope of Delivery: - Workshop calliper gauge DIN 862 300 mm - Delivery incl. test report (up to 1000 mm) Product Description: with blade tips - scale and vernier matt chrome-plated - graduation and scaling highly accurate thanks to laser labelling - main graduation lowered - internal and external measurement Hole size attachment for internal measurements: up to 300 mm Measuring range = 10 mm 500 - 1000 mm Measuring range = 20 mm Technical Data: - Reading type: analogue - subject to inspection: yesFor commercial use, please observe the building regulations!
-
HELIOS PREISSER HELIOS PREISSER workshop calliper gauge DIN 862 300 mm ( 4000851120 )
Sat, 08/30/2025
Scope of Delivery: - Workshop calliper gauge DIN 862 300 mm - Delivery incl. test report (up to 1000 mm) Product Description: with blade tips - scale and vernier matt chrome-plated - graduation and scaling highly accurate thanks to laser labelling - main graduation lowered - internal and external measurement Hole size attachment for internal measurements: up to 300 mm Measuring range = 10 mm 500 - 1000 mm Measuring range = 20 mm Technical Data: - Reading type: analogue - subject to inspection: yesFor commercial use, please observe the building regulations!
CHF 196.41
-
HELIOS PREISSER HELIOS PREISSER Caliper gauge 300 mm ( 4000851041 )
Sat, 08/30/2025
Scope of Delivery: - Caliper gauge 300 mm Product Description: with fine adjustment - vernier and scale matt chrome-plated - the long marking surface enables precise marking - the marking ruler slides into the stop bridge at the zero point, allowing any desired dimension to be set quickly and precisely - with fine adjustment and locking screw - hardened marking edges Calibration on request and at extra charge. Technical Data: - Stop length: 160mm - subject to inspection: yesFor commercial use, please observe the building regulations!
CHF 249.27
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"