Only this week: 10% off all BOSCH power tools - discount will be deducted in the shopping cart

Measuring and Testing equipment

171 products

  • BENNING standby bag DUSPOL L330xH60xW100mm ( 4000828854 )

    BENNING BENNING standby bag DUSPOL L330xH60xW100mm ( 4000828854 )

    Fri, 09/26/2025

    Scope of Delivery: - Standby bag DUSPOL L330xH60xW100mm - Supplied without contents (tester) Product Description: with Velcro fastener and belt pouch made of hard-wearing nylon fabric suitable for: DUSPOL® analogue, DUSPOL® expert, DUSPOL® digital, PROFIPOL®+ Technical Data: - Width: 100mm - Length: 330mm - Design: with Velcro fastener and belt loop - height: 60mm - Suitable for: DUSPOL® analogue, DUSPOL® expert, DUSPOL® digital, PROFIPOL®+For commercial use, please observe the building regulations!

    1 - 2 business days

    CHF 28.51

  • BENNING continuity/line tester DUTEST(R) pro 6-400 V AC/DC ( 4000828842 )

    BENNING BENNING continuity/line tester DUTEST(R) pro 6-400 V AC/DC ( 4000828842 )

    Fri, 09/26/2025

    Scope of Delivery: - Continuity/line tester DUTEST® pro 6-400 V AC/DC - Continuity and lead tester, integrated magnetic holder and belt clip Supplied without batteries (3 AA batteries required) For batteries, see item no. 4000 901 811 Product Description: with work light - for testing high and low resistance resistors - continuity and diode testing via LEDs and test buzzer - buzzer volume and brightness of the pinpoint high-power LED torch individually adjustable in 4 stages Measuring ranges: - Display via 3 LEDs: 0 - 100 Ω/ 1 kΩ/ 10 kΩ - Acoustic display via test buzzer up to approx. 100 Ω - External voltage display: 6 - 400 V (LEDs/ test buzzer) - Polarity test - Single-pole phase conductor test (phase) - Non-contact cable break detector - Measurement category: CAT lll 300 V Technical Data: - Mode of operation: two-pole - Continuity test: LED/buzzerFor commercial use, please observe the building regulations!

    1 - 2 business days

    CHF 42.23

  • BENNING SDT 1 socket outlet tester for testing socket outlets with earthing contact ( 4000828811 )

    BENNING BENNING SDT 1 socket outlet tester for testing socket outlets with earthing contact ( 4000828811 )

    Fri, 09/26/2025

    Scope of Delivery: - SDT 1 socket outlet tester for testing earthed socket outlets Product Description: Quick and easy testing of earthed sockets for correct connection - Wiring faults, such as missing PE, N and L conductors and reversed L and PE conductors are clearly indicated via 3 LEDs - Active PE test with touch electrode and LC display warns of the presence of a dangerous touch voltage (> 50 V) at the protective conductor connection (PE) - Test button for tripping 30 mA RCD circuit breaker - Clear indication via LEDs and LC display - Easy-to-understand status table provides information on the correct connection (OK, green) and the type of fault present (red) of the socket outlet with earthing contact - Measuring category CAT III 300 V Technical Data: - Display: LCD/LEDsFor commercial use, please observe the building regulations!

    1 - 2 business days

    CHF 56.71

  • NESTLE cross line laser NCL-2G SET 20 (50 m. receiver) m ( 4000855903 )

    NESTLE NESTLE cross line laser NCL-2G SET 20 (50 m. receiver) m ( 4000855903 )

    Fri, 09/26/2025

    Scope of Delivery: - Cross line laser NCL-2G SET 20 (50 m. receiver) m - Cross line laser, target plate, wall bracket NWM-802, case, laser goggles, batteries, instructions Product Description: For indoor use - thanks to the green laser beams, the cross line laser impresses with the high visibility of the projected lines - integrated pendulum compensator enables reliable self-levelling - pulse mode for working with receiver over long distances - option to fix the laser lines for inclined projection - with acoustic warning - 1/4″ connection - horizontal/vertical line tolerance: ± 3 mm at 10 m / ± 2.5 mm at 10 m - Operating temperature: -10 °C to +45 °C - Storage temperature: -20 °C to +60 °C - Dimensions: 119 x 62 x 95 mm Technical Data: - Laser class: 2Note on the disposal of batteries and rechargeable batteries - As we sell batteries and rechargeable batteries or devices containing batteries and rechargeable batteries, we are obliged under the German Battery Act (BattG) to draw your attention to the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!

    1 - 2 business days

    CHF 209.48

  • BENNING phase/magnetic field tester VT 2 1-pole ( 4000828953 )

    BENNING BENNING phase/magnetic field tester VT 2 1-pole ( 4000828953 )

    Fri, 09/26/2025

    Scope of Delivery: - Phase/magnetic field tester VT 2 1-pole - Delivery incl. batteries (2 x type AAA), pin clip, spare battery see art. 4000 901 810 Product Description: non-contact operation - 1-pole phase tester with red LED test probe and increasing buzzer frequency - phase testing on sockets, junction boxes, switches, cables and lamps, etc. - testing of insulated cables, such as cable reels, fairy lights, for cable breakage - voltage 12 - 1000 V AC - 12 V voltage range can be switched on via push-button - capacitive measuring method - testing of magnetic fields (permanent, (permanent, AC and DC induced), solenoid valves in pneumatic and hydraulic systems, heating systems and pumps, relays/contactors in vehicles, machines, devices and control systems - Magnetic field display via green LED test probe - Integrated test magnet for functional testing - Cable break detector - Cat IV 600 V, Cat III 1000 V - IP53 - Length 153 mm - Tip length 12 mm - Blade width 3 mm Technical Data: - Batteries: 2 x AAA - Protection class: IP53Note on the disposal of batteries and rechargeable batteries - As we sell batteries and rechargeable batteries or devices containing batteries and rechargeable batteries, we are obliged under the German Battery Act (BattG) to inform you of the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!

    1 - 2 business days

    CHF 60.83

  • BENNING leakage current clamp CM 9-1 Measuring range 0.010 mA - 60 A AC ( 4000828949 )

    BENNING BENNING leakage current clamp CM 9-1 Measuring range 0.010 mA - 60 A AC ( 4000828949 )

    Fri, 09/26/2025

    Scope of Delivery: - Leakage current clamp CM 9-1 Measuring range 0.010 mA - 60 A AC - Delivery incl. bag, test leads, batteries (2 x type AAA), spare batteries see art. no. 4000 901 810 Product Description: 4-digit illuminated LCD display (6,000 dots) - Measurement of leakage, residual. protective conductor and load currents in electrical systems, devices and machines - measurement without disconnection under normal operating conditions - ideal for preventive maintenance and troubleshooting (protection against property damage and personal injury, power failures, etc.) - reliable and simple detection of insulation faults (e.g. defective cables, loose terminals, dirt, moisture, etc.) frequency characteristics in accordance with EN 61557-16 for testing electrical devices in accordance with VDE 0701-0702 - LPF low-pass filter (40 - 70 Hz) for suppressing high-frequency interference signals - frequency range for railway and industrial applications: 15 Hz - 1 kHz (fg) - Defined protection against external magnetic fields in accordance with EN 61557-13, class 2 ≤ 30 A/m - Automatic range selection - Peak value (PEAK), measured value memory (HOLD) - Zero adjustment (ZERO) - Clamp opening max. 23 mm - Measuring category CAT IV 300 V, CAT III 600 V - Measuring ranges: Alternating current (0.010 mA - 60 A), highest resolution of 1 µA in the 6 mA measuring range, voltage (0.01 V - 600 V AC/DC), resistance (0.1 Ω - 600 kΩ), continuity test Technical Data: - Width: 76mm - Length: 210mm - Height: 34mm - Display: LCDNote on the disposal of batteries and rechargeable batteries - As we sell batteries and rechargeable batteries or devices containing batteries and rechargeable batteries, we are obliged under the Battery Act (BattG) to inform you of the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!

    1 - 2 business days

    CHF 480.70

  • BENNING current clamp multimeter CM 1-4 0.1 A-200 A AC ( 4000828948 )

    BENNING BENNING current clamp multimeter CM 1-4 0.1 A-200 A AC ( 4000828948 )

    Fri, 09/26/2025

    Scope of Delivery: - Current clamp multimeter CM 1-4 0.1 A-200 A AC - Supplied with belt holster, test leads, rubberised contact tip protection, push-on caps (CAT III/IV), contact tip enlargement (Ø 4 mm), batteries (2 x type AAA), replacement batteries see art. no. 4000 901 810 Product Description: 4-part illuminated LCD display (9,999 dots) - with open current clamp, LED step display, phase and rotary field test - rotary field direction test via green LEDs (right/left) - voltage display from 50 V functional with empty batteries - deactivatable signal tone for voltage measurement - one-hand operation for voltage measurement on sockets (19 mm) - automatic range selection - measured value memory (HOLD) - self-test device (self-test) - LED measuring point illumination - measuring category CAT IV 600 V, CAT III 1000 V Measuring ranges: Alternating current (100 mA - 200 A), voltage (6.0 V - 1000 V), resistance (1 Ω - 50 kΩ), rotary field direction display, continuity test, single-pole phase conductor test (phase), polarity test Technical Data: - Width: 57mm - Length: 220mm - Pliers opening: 16mm - Height: 35mm - subject to testing: yesNote on the disposal of batteries and rechargeable batteries - As we sell batteries and rechargeable batteries or devices containing batteries and rechargeable batteries, we are obliged under the Battery Act (BattG) to draw your attention to the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!

    1 - 2 business days

    CHF 268.18

  • BENNING CM P2 current clamp multimeter 0.01 A - 400 A AC/DC ( 4000828938 )

    BENNING BENNING CM P2 current clamp multimeter 0.01 A - 400 A AC/DC ( 4000828938 )

    Fri, 09/26/2025

    Scope of Delivery: - Current clamp multimeter CM P2 0.01 A - 400 A AC/DC - Supplied with batteries (2 x type AAA) and protective bag, for spare batteries see art. no. 4000 901 810 Product Description: illuminated 4-digit LCD display (4,200 dots) - highest resolution of 10 mA AC in the 40 A measuring range - integrated voltage sensor (NCV) signals phase voltages and cable breaks in lines without contact (optical/acoustic) - inrush current measurement (INRUSH) - low-pass filter (LPF) - automatic switch-off (APO after 15 min., can be deactivated) - battery undervoltage display - measured value memory (HOLD) - ZERO function - measuring category CAT III 600 V measuring ranges: direct current: 10 mA - 400 A, alternating current: 10 mA - 400 A Technical Data: - Width: 59mm - Length: 149mm - Pliers opening: 23mm - Height: 28mmNote on the disposal of batteries and rechargeable batteries - As we sell batteries and accumulators or devices containing batteries and accumulators, we are obliged under the Battery Act (BattG) to draw your attention to the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!

    1 - 2 business days

    CHF 136.13

  • BENNING CM P1 current clamp multimeter 0.01 A - 400 A AC ( 4000828937 )

    BENNING BENNING CM P1 current clamp multimeter 0.01 A - 400 A AC ( 4000828937 )

    Fri, 09/26/2025

    Scope of Delivery: - Current clamp multimeter CM P1 0.01 A - 400 A AC - Supplied with batteries (2 x type AAA) and protective bag, for replacement batteries see art. no. 4000 901 810 Product Description: illuminated 4-digit LCD display (4,200 dots) - highest resolution of 10 mA AC in the 40 A measuring range - integrated voltage sensor (NCV) signals phase voltages and cable breaks in lines without contact (optical/acoustic) - inrush current measurement (INRUSH) - low-pass filter (LPF) - automatic switch-off (APO after 15 min., can be deactivated) - battery undervoltage display - measured value memory (HOLD) - measuring category CAT III 600 V measuring ranges: Alternating current: 10 mA - 400 A Technical Data: - Width: 59mm - Length: 149mm - Pliers opening: 23mm - Height: 28mmNote on the disposal of batteries and rechargeable batteries - As we sell batteries and accumulators or devices containing batteries and accumulators, we are obliged under the Battery Act (BattG) to draw your attention to the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!

    1 - 2 business days

    CHF 100.96

  • TESTBOY digital multimeter Testboy 313 0-600 V AC, 0-600 V DC ( 4000828931 )

    TESTBOY TESTBOY digital multimeter Testboy 313 0-600 V AC, 0-600 V DC ( 4000828931 )

    Fri, 09/26/2025

    Scope of Delivery: - Digital multimeter Testboy 313 0-600 V AC, 0-600 V DC - Supplied with battery (1 x type block battery), 2 test leads, 1 temperature probe and 1 case, for replacement battery see art. no. 4000 901 814 Product Description: DC and AC voltage up to 600 V - DC and AC current up to 10 A - Application errors excluded by automatic measuring range protection - Continuity test - Diode test - Resistance up to 20 MOhm - Capacitance up to 20 µF - Temperature measurement -20 to +1000 °C via temperature sensor - Frequency 0-20 kHz - Data hold function - Backlight - Overvoltage category: CAT III 600 V - Measuring range: AC voltage: 0 - 600 V DC voltage: 0 - 600 V AC current: 0 - 10 A DC current: 0 - 10 A Technical Data: - Width: 90mm - Length: 195mm - Height: 35mm - subject to testing: yesNote on the disposal of batteries and rechargeable batteries - As we sell batteries and accumulators or devices containing batteries and accumulators, we are obliged under the Battery Act (BattG) to inform you of the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!

    1 - 2 business days

    CHF 81.59

  • BENNING Multimeter MM 12 0.0001 V-1000 V AC/DC ( 4000828924 )

    BENNING BENNING Multimeter MM 12 0.0001 V-1000 V AC/DC ( 4000828924 )

    Fri, 09/26/2025

    Scope of Delivery: - Multimeter MM 12 0.0001 V-1000 V AC/DC - Supplied with PC software, serial data cable with USB connection, rubber protective frame, magnetic hanger, bag, batteries (4x 1.5 V Mignon/ AA/ LR6), test leads, wire temperature sensor, calibration certificate Replacement battery see item no. 4000 901 811 Product Description: with 4-digit, illuminated LCD display (4,000/ 40.000 dots) with bar graph and logging function as well as Bluetooth® interface - DC/AC voltage (10 µV - 1000 V), DC/AC current (10 µA - 10 A), resistance (0.1 Ω - 40 MΩ), frequency (0.1 Hz - 100 kHz), capacitance (0.01 nF - 40 mF), temperature (-200 °C - +1200°C) - continuity test (30 Ω) (buzzer)/ diode test (2.0 V) - LOG data logger function (40.000 measured values, sampling rate: 1 s - 10 min.) - MEM memory function (1.000 measured values, automatic A-SAVE and manual storage SAVE) - Free PC software BENNING PC-Win MM 12: Measured value transmission in real time via serial data cable with USB connection to PC or laptop, sampling rate (measuring interval) adjustable from 1 s to 10 min, display of measured values via line diagram and tabular form with calculation of maximum/minimum and average value, storage of up to 100.000 measured values in MS EXCEL® format, download of the data logger LOG and the memory MEM - Bluetooth® Low Energy 4.0 interface and optical interface via USB connection - IOS and Android APP for online transmission and download of the data logger/memory - Download free APP "BENNING MM-CM Link"! View, save and share the measured values for further analysis. Monitor up to 5 digital multimeters simultaneously from a safe distance. Transmit measured values in real time via Bluetooth 4.0 to smartphone and tablet (IOS/ Android from 4.3). Download the LOG data logger and the MEM memory. Storage of measured values in CSV format. Display of measured values via line diagram and tabular form - AutoV function for automatic AC/DC voltage detection and low input impedance (LoZ) for suppressing capacitive/inductive interspersed voltages - Low-pass filter (high-frequency suppression HFR) for measurements on motor drives - Automatic/manual range selection, automatic switch-off, battery status display - measured value (HOLD), peak value memory (P-HOLD), relative measurement (REL), maximum/minimum/average value (MAX/ MIN/ AVG), level measurement (dB/dBm) - measurement category CAT IV 600 V, CAT III 1000 V Technical Data: - Width: 94mm - Length: 206mm - Height: 54mmNote on the disposal of batteries and rechargeable batteries - As we sell batteries and rechargeable batteries or devices containing batteries and rechargeable batteries, we are obliged under the Battery Act (BattG) to inform you of the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!

    1 - 2 business days

    CHF 507.84

  • BENNING AC/DC current clamp adapter CC 3 0.2 - 300 A ( 4000828918 )

    BENNING BENNING AC/DC current clamp adapter CC 3 0.2 - 300 A ( 4000828918 )

    Fri, 09/26/2025

    Scope of Delivery: - AC/DC current clamp adapter CC 3 0.2 - 300 A - Delivery incl. battery (type block battery), AC/DC current clamp adapter, test leads, bag, spare battery see art. no. 4000 901 814 Product Description: for use with installation tester IT 130 (art. no. 4000 828 919) or digital multimeter with 4 mm measuring sockets DC/AC current 0.2 A - 300 A AC/DC output 1 mV/1 A incl. battery, test leads and bag Measuring category: CAT III 600 V Technical Data: - Pliers opening: max. 25mmNote on the disposal of batteries and rechargeable batteries - As we sell batteries and rechargeable batteries or devices containing batteries and rechargeable batteries, we are obliged under the German Battery Act (BattG) to inform you of the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!

    1 - 2 business days

    CHF 185.76


I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"

Log in

Forgot your password?

Don't have an account yet?
Create account