Festool tools and machines
Here you will find all tools, machines and accessories from the traditional manufacturer FESTOOL. Discover the entire range!
-
Festool Festool ISC 240 EB-Basic cordless insulation saw 18 V 240 mm ( 576571 ) + Systainer - without battery, without charger ( successor to 574821 )
Fri, 11/28/2025
Scope of Delivery: - 1x Festool ISC 240 cordless insulation saw - 1x Festool SG-240/W-ISC serrated cutting set ( 575411 ) - 1x adapter table (204160) - 1x guide rail carriage - 1x Systainer³ SYS3 M 237 - without battery, without charger Product Description: The ISC 240 insulation saw from Festool is ideally suited for precise and fast cuts thanks to its perfectly matched cutting set. With a stroke rate of 3000 min-¹, it is able to cleanly cut PUR insulation materials up to a thickness of 240 mm in addition to mineral or natural fibre insulation materials. The well-balanced design also makes longer applications possible, even in one-handed operation. The ability to change the cutting set without tools makes the ISC 240 even easier to use. The adapter supplied also makes the saw compatible with guide rails. Technical Data: - Manufacturer: Festool - Manufacturer designation: ISC 240 EB-Basic - Manufacturer number: 576571 - Voltage: 18 V - Stroke length: 26 mm - Stroke rate: 3000 min-1 - Cutting depth: 240 mm - Dust extraction connection: 27 mm - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 401.33
-
Festool Festool KV D8/50 corner connector 50 pieces ( 203166 ) for dowel cutter DOMINO DF 500
Fri, 11/28/2025
Scope of Delivery: - 50x expansion anchor - 50x bolts with M4 thread - 50x plastic shells - 50x cross anchor with grub screw Product Description: With the new carcase and furniture connectors for the DOMINO DF 500 dowel router, furniture construction is now even more versatile. These connectors enable stable and flexible furniture constructions that can be easily removed again. Whether corner, centre panel or perforated row joints - the DOMINO connectors offer a wide range of applications and maximum flexibility. The clever DOMINO system enables simple and precise positioning of the joints without additional stops or positioning aids. This makes work quick and efficient. The long tightening travel and the long bolts of the connectors make furniture assembly considerably easier - even assembling cabinets alone is no problem. The flush fitting elements protect the furniture parts from scratching, and milling and cutting tolerances of up to 1.4 mm are easily compensated for. The new DOMINO connectors are ideal for panel thicknesses from 18 to 28 mm and enable a detachable corner connection with the DOMINO router. With these innovative connectors, furniture construction becomes a simple and efficient task - for maximum flexibility, speed and efficiency. Technical Data: - Manufacturer: Festool - Manufacturer's designation: KV D8/50 - Manufacturer number: 203166 - Connecting fitting (8 mm DOMINO dowel milling): D8 - DOMINO milling depth for side part: 15.00 mm - DOMINO milling depth for base section: 28.00 mm - Drilling diameter in base section: 15.00 mm - Panel thickness: 18 - 28 mm - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 88.93
-
Festool Festool OSC 18 Li E-Basic Vecturo cordless oscillating tool 18V ( 574848 ) Brushless StarlockMax Solo in systainer - without battery, without charger
Fri, 11/28/2025
Scope of Delivery: - 1x Festool OSC 18 Li E-Basic VECTURO 18 V cordless oscillator ( 574848 ) - 1x Festool Systainer T-LOC SYS 2 TL (497564) - 1x Festool universal saw blade USB 78/32/Bi/OSC ( 203337 ) - without battery, without charger Product Description: Precise cut-outs on a tear, precisely guided plunge cuts on sensitive surfaces and low-dust work, even overhead: this is what the cordless VECTURO OSC 18 stands for, with the StarlockMax tool holder guaranteeing quick, tool-free tool changes. The brushless EC-TEC motor with vibration decoupling ensures maximum work progress with a high level of comfort. The interplay with the sophisticated attachment and extraction accessories makes the VECTURO an intelligent system solution for the highest demands on performance, comfort and precision. Working with this oscillator is not only fast, but also comfortable: The vibration and noise damping ensures optimum working comfort. Thanks to the anti-vibration system, the housing and motor are completely decoupled. The brushless EC-TEC motor with infinitely variable speed adjustment also ensures maximum work progress. Mobility is also guaranteed with this machine: The absence of cables means you have complete freedom of movement thanks to the 18 V Li-Ion Compact battery technology. Technical Data: - Swing angle: 2 x 2.0° - Battery voltage: 18 V - Weight with battery: 1.8 kg - Tool holder: StarlockMax / StarlockPlus / Starlock - Oscillation: 10 000 - 19 500 min-¹ - Sawing: Uncertainty (vibration): K 1.50 m/s² - Sawing: A-weighted sound pressure level Lp: 83.00 dB(A) - Sawing: Total vibration mean value ah: min. 2.50 m/s² - Saws: A-weighted sound power level Lw: 94.00 dB(A) - Saws: Total vibration mean value ah max.: 7.00 m/s² - Saws: Total vibration mean value ah: 2.5 - 7 m/s² - Saws: EN 60745 series of standards: EN 62841 - Saws: Uncertainty (noise) K: 3.00 dB - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 306.41
-
Festool Festool screw clamps FSZ 120 2 pieces ( 489570 )
Fri, 11/28/2025
Scope of Delivery: - 2 x Festool FSZ 120 screw clamps ( 489570 ) Product Description: The FSZ 120 screw clamps from Festool are particularly robust and durable thanks to their all-steel design. The screw clamps are inserted into the lower groove of the guide rail and, thanks to their customised shape, hold the MFT and Precisio very securely and non-slip. The maximum clamping width is 120 mm. Technical Data: - Span: 120 mm - Package contents: 2 pcs. - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 35.76
-
Festool Festool Systainer SYS3 M 187 ( 204842 ) 15.9 litres 396x296x187mm Tool case, linkable
Fri, 11/28/2025
Scope of Delivery: - 1x Festool Systainer SYS3 M 187 ( 204842 ) Product Description: Festool has created even more mobility with the new generation of Systainer cases. The co-operation between Festool, TANOS and bott brings the DIY enthusiast, the workshop and the building site together. Thanks to the perfect integration into the bott vario3 van racking system, the Systainers are organised and easy to use. As usual, the workmanship is perfect and extremely robust, as demonstrated by the load capacity of 20 kg to 40 kg. There is also no need to worry about the lid load, which is 100 kg. Of course, the new Systainer cases are compatible with each other and all previous Systainers are also 100 per cent interchangeable. The new ergonomic carrying handle on the front, the practical pull-out aid and the typical "one-turn" coupling are absolute luxuries that no tradesman should be without. With the new Systainer cases, Festool has proven that tool cases can also be ergonomic and practical. Technical Data: - manufacturer number: 204842 - Dimensions with feet (L x W x H): 396 x 296 x 187 mm - Internal dimensions (L x W x H): 389 x 275 x 146 mm - Volume: 15.9 litres - Load capacity (single): 20 kg - Load capacity (coupled): 40 kg - Permissible lid load: 100 kg - Weight: 1.7 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 64.17 CHF 38.00
-
Festool Festool SYS-STF DELTA GR-Set Abrasive set P60 - P220 100 pcs. ( 578195 ) for Delta sander DTS 400 / DTSC 400 / DS 400 + Systainer
Fri, 11/28/2025
Scope of Delivery: - 20x abrasive garnet STF DELTA/9 P60 GR - 20x abrasive garnet STF DELTA/9 P80 GR - 20x abrasive garnet STF DELTA/9 P120 GR - 20x abrasive garnet STF DELTA/9 P180 GR - 20x abrasive garnet STF DELTA/9 P220 GR - SYS3 M 112 Systainer Product Description: The Festool SYS-STF DELTA GR set is the ideal addition to your sanding machine and ensures perfectly sorted abrasives. With a wide selection of grit sizes from P60 to P220, this abrasive systainer is the perfect introduction to the world of garnet abrasives. The organised structure in the Systainer allows you to quickly find the grit size you need and refill it easily so that you always have the right abrasive disc to hand. The Systainer reliably protects your abrasives from dust, splash water and kinks and makes transport easier. It can also be easily linked to other Systainers, which leaves a professional impression on your customers. From the workshop to the construction site, the abrasive systainer gives you maximum flexibility in your day-to-day work. The tried-and-tested T-LOC control element makes it easy to close, open and connect the Systainers, which are compatible with each other and with all previous Systainer generations as well as many machines and accessories. The garnet sanding sheets are especially suitable for VOC paints and hard surfaces. Thanks to the special coating, the formation of hats is avoided, resulting in a long service life. Other substrates can also be easily processed with Granat abrasives. The sanding sheets are FSC™-certified, which stands for sustainable quality. With the Festool SYS-STF DELTA GR set, you are ideally equipped for perfect surfaces. Technical Data: - Manufacturer: Festool - Manufacturer's designation: SYS-STF DELTA GR-Set - Grit size: P 60/P 80/P 120/P 180/P 220 - Systainer size: SYS3 M 112 - Number of compartments: 5.00 - Dimensions (L x W x H): 396 x 296 x 112 mm - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 45.19
-
Festool Festool BP 18 Li 3.0 Ergo I battery 18 V 3.0 Ah / 3000 mAh Li-Ion ( 577704 ) with charge level indicator
Fri, 11/28/2025
Scope of Delivery: - 1x Festool BP 18 Li 3.0 Ergo I rechargeable battery 18 V 3.0 Ah ( 577704 ) Product Description: The BP 18 Li 3.0 Ergo I battery pack is an innovative battery solution for the Festool cordless sanders ETSC 125, RTSC 400 and DTSC 400. With its 3.0 Ah capacity and longer running time than charging time, it enables uninterrupted working and even longer running performance. The battery pack can be replaced with the plug it mains adapter (available as an accessory) for all applications that require an even longer run time. It also impresses with its practical LED display for quick visualisation of the remaining capacity, Bluetooth® function for automatic control of the CLEANTEC mobile dust extractor and the Festool WorkApp for clever additional functions. It is also fully covered by Festool Service, so you can work with peace of mind. Thanks to its ergonomic and lightweight design, you get perfect handling with the Festool cordless sanders. Technical Data: - Manufacturer: Festool - Manufacturer's description: BP 18 Li 3,0 Ergo I - Manufacturer number: 577704 - Voltage: 18 V - Capacity: 3.0 Ah - Cell technology: Li-Ion - Weight: 400 g - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 93.25
-
Festool Festool CT-VA 20 CT pre-separator for large amounts of dust - for all Festool CT 26/36/48 dust extractors ( 204083 )
Fri, 11/28/2025
Scope of Delivery: - 1x cyclone Systainer - 1x Systainer tray - 1x collecting container VAB-20 - 1x connection hose - 1x disposal bag - 1x container lid - 1x Operating instructions Product Description: The Festool CT-VA 20 CT pre-separator copes with large quantities of milling, wood and sawdust and mineral fine dust. Thanks to the new, built-in cyclone technology, the pre-separator captures up to 95% of the extracted dust before it can pass through the main filter of the mobile dust extractor. This system protects the filter, reduces the load and guarantees consistently high extraction performance throughout the entire working period. Thanks to its robust and compact design, the pre-separator can be transported safely. The collected waste can be easily disposed of. The pre-separator can be easily connected to the extraction unit via T-LOC in order to work with or without the pre-separator, depending on the application. The CT-VA 20 is a relief for man and machine, especially when working with high dust volumes. Technical Data: - Dimensions (L x W x H): 395mm x 295mm x 515mm - Weight: 7 kg - Container volume: max. 20 litres - Approved dust class: L and M - Suitable for: Festool CT 26/36/48 dust extractors (with and without Auto-Clean) - Filtering of mineral dusts: up to 80% - Filtering of coarse dusts: up to 95 - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 304.21
-
Festool Festool TDC 18/4 I-Basic cordless drill driver 18 V 75 Nm ( 575601 ) Brushless + Systainer - without battery, without charger
Fri, 11/28/2025
Scope of Delivery: - 1x Festool TDC 18/4 cordless drill driver - 1x Festool PZ 2 bit - 1x Festool CENTROTEC magnetic bit holder BH 60 CE-Imp - 1x Festool CENTROTEC tool chuck - 1x Festool FastFix quick-action drill chuck 13 mm KC 13-1/2-MMFP - 1x Festool additional handle - 1x Festool SYS3 M 187 Systainer Product Description: With the TDC 18/4, Festool offers a powerful cordless drill driver for the highest demands. The combination of a handy design and enormous power enables comfortable and effective working. Thanks to the 4 different gears, the drill driver can be optimised for all applications. This means that screwing with 50 Nm is just as possible in 1st gear as drilling in 4th gear at 3600 rpm. The brushless EC-TEC motor combines enormous resilience and endurance with low wear and therefore a long service life. Thanks to the FastFix interface, the attachments can be changed quickly and without tools. The KickbackStop function minimises the risk of serious injury when the drill driver jams by stopping the motor, thereby protecting the user's health. Festool is a premium manufacturer of power tools that is characterised above all by its long tradition and very high quality workmanship. Technical Data: - Manufacturer: Festool - Manufacturer's designation: TDC 18/4 - Manufacturer number: 575601 - Battery voltage: 18 V - Gears: 4 - Idle speed 1st/2nd gear: 0 - 500/0 - 800 min-¹ - Idle speed 3rd/4th gear: 0 - 2350/0 - 3600 min-¹ - Drilling diameter wood/steel: 70/13 mm - Torque setting 1st/2nd gear: 2 - 20/2 - 20 Nm - Max. Torque wood/steel: 50/75 Nm - Drill chuck clamping width: 1.5 - 13 mm - Battery capacity: 4.0/5.2 Ah - Product weight with battery: 1.9/2.0 kg - Drive type: Battery - Drilling in metal: Total average vibration value ah: 3.00 m/s² - Drilling in metal: Standards series EN: 62841 - Drilling in metal: Uncertainty (noise) K: 5.00 dB - Drilling in metal: Uncertainty (vibration) K: 1.50 m/s² - Drilling in metal: A-weighted sound pressure level Lp: 73.00 dB(A) - Drilling in metal: A-weighted sound power level Lw: 84.00 dB(A) - Screws: Total average vibration value ah: 2.50 m/s² - Screws: Standards series EN: 62841 - Screws: Uncertainty (noise) K: 5.00 dB - Screws: Uncertainty (vibration) K: 1.50 m/s² - Screws: A-weighted sound pressure level Lp: 73.00 dB(A) - Screws: A-weighted sound power level Lw: 84.00 dB(A) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 253.99
-
Festool Festool mains adapter ACA 220-240/18V Ergo for cordless sanders RTSC 400, DTSC 400, ETSC 125 with 4 m cable ( 202501 )
Fri, 11/28/2025
Scope of Delivery: - 1 x Festool ACA 220-240/18V Ergo mains adapter ( 202501 ) - 1 x Festool Plug It mains cable with 4 metre length Product Description: The ACA 220-240/18V Ergo mains adapter allows the user of Festool cordless sanders from the RTSC 400, DTSC 400 and ETSC 125 series to replace the 18 volt Ergo battery pack with the Plug It mains adapter and thus prepare the machines for continuous electrical operation. The ergonomic and very lightweight design is also ideal in combination with a Festool mobile dust extractor, allowing longer runtimes under heavy loads and the toughest applications. Compatibility is limited to the Ergo cordless models and cannot be extended to Festool's normal cordless machines. Technical Data: - Rated power: 150 W - Weight: 0.3 kg - Input voltage: 220 - 240 V - Voltage: 18 - 20 V - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 102.71
-
Festool Festool LEYSYS-FT1 spirit level 354 x 12 x 26 mm ( 577220 ) metric / INCH scaling made of solid aluminium profile
Fri, 11/28/2025
Scope of Delivery: - 1x Festool LEYSYS-FT1 spirit level 354 x 12 x 26 mm Product Description: The Festool LEYSYS-FT1 spirit level is a compact and high-quality spirit level in BMI design. With its innovative Systainer handle, it offers safe storage and easy transport. The spirit level has a horizontal vial and a vertical vial, with an impressive measuring accuracy of +/- 1.0 mm/m. For added versatility, the front of the spirit level has a metric scale and the back has an INCH scale. The contact surface of the spirit level is prismatic, which makes it perfect for contact with shafts or pipes. This enables accurate and simple measurement even at difficult angles. Manufactured from a high-quality solid aluminium profile (AlMgSi 0.5 natural anodised), the Festool LEYSYS-FT1 is extremely durable and robust. With its "Made in Germany" origin, it guarantees the highest quality. The spirit level comes in an elegant silver colour with green and blue details. Measuring 35.4 x 1.2 x 2.6 cm, it is handy and easy to handle. Technical Data: - Manufacturer: Festool - Manufacturer's designation: LEYSYS-FT1 - Manufacturer number: 577220 - Dimensions (L x W x H): 354 x 12 x 26 mm - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 51.97
-
Festool Festool SYS3 XXL 337 Systainer system case 792 x 296 x 337 mm 64.2 l ( 204851 )
Fri, 11/28/2025
Scope of Delivery: - 1x Festool SYS3 XXL 337 Systainer system case - 1x cover for labelling field Product Description: The Festool SYS3 XXL 337 Systainer system case offers extra storage space for maximum organisation. With this large case, there is room for everything, be it machines, power tools, hand tools, accessories, small parts or other work equipment. The carrying handles ensure easy transport, while the option of linking the case with other Systainers and the roller board saves time and enables efficient working. With the SYS3 XXL 337 system case, you can keep your work organised, clear and professional at all times. Technical Data: - Manufacturer: Festool - Manufacturer designation: SYS3 XXL 337 - Manufacturer number: 204851 - Dimensions with feet (L x W x H): 792 x 296 x 337 mm - Internal dimensions (L x W x H): 786 x 279 x 288 mm - Volume: 64.20 litres - Load capacity: 40.00 kg - Load capacity (coupled): 80.00 kg - Permissible ceiling load: 100.00 kg - Product weight without accessories: 4.33 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 64.20
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"
Festool Cordless Screwdrivers & Drills
Festool Saws
Festool Sanding and Cutting Technology
Festool Dust Extraction
Festool batteries and chargers
Discover the world of Festool power tools: Quality that inspires
At Festool we look back on a tradition of over 90 years, in which our passion for high-quality power tools has never waned. We share this enthusiasm with our users and fans, whom we not only make work easier with our products, but also help them to achieve the perfect result more quickly. Our focus is always on system solutions and perfection down to the smallest detail – a standard that sets us apart from others.
Frequently Asked Questions about FESTOOL
What is FESTOOL specialized in?
FESTOOL offers a wide range of power tools, accessories and consumables. FESTOOL is primarily known for tools for woodworking. FESTOOL produces precise plunge saws and circular saws, as well as jigsaws and cordless screwdrivers. FESTOOL products are also well-known in the abrasives sector.
Where are FESTOOL tools manufactured?
FESTOOL manufactures a large part of the tools in Germany and the Czech Republic.
What is the FESTOOL all-inclusive Service?
FESTOOL offers its customers comprehensive services. For machines and wear parts, FESTOOL generally provides a 36-month warranty. Incidentally, the power tools are registered upon purchase.
Since when has FESTOOL existed?
FESTOOL was founded in 1925 by Albert Fezer and Gottlieb Stoll in Wendlingen am Neckar. The first groundbreaking innovation was the portable circular saw AS-70.
How long does shipping take?
If you order by 12 PM, your order will be shipped the same day. You will then receive your order the next day.
How do I register my FESTOOL device?
To respect your privacy, FESTOOL has decided that the warranty registration must be carried out by the customer themselves. You can easily register your tool directly with FESTOOL in the service portal. Go to the MyFestool portal here