Scope of Delivery:
- 1x Festool OFKC 500 R3 EB-Basic cordless edge router
- 1x rounding cutter HW R3-OFK 500 Z1 ( 578378 )
- 1x thrust ball bearing KLS-D 15.8-OFK ( 490249 )
- 1x extraction bonnet with ball bearing brake
- 1x spring plate ball bearing brake
- 1x Festool BP 18 Li 4.0 HPC-ASI 18 V 4.0 Ah battery
- 1x Systainer³ SYS3 M 187 ( 204842 )
- without charger
Product Description:
The Festool OFKC 500 R3 EB-Basic cordless edge router offers an excellent combination of precision, mobility and flexibility. Thanks to its balanced centre of gravity and slim design, it enables tilt-proof routing and is particularly easy to guide. The battery-powered drive ensures maximum manoeuvrability and cordless operation, offering more freedom and room to move. The 1/10 mm accurate routing depth adjustment enables precise and clean results without reworking, while the stable connection between the router and drive ensures maximum concentricity. The OFKC 500 is optimised for various milling applications, with optimum coordination of all milling cutters (R1 - 6, chamfers, flush) to the outsole bore. The hard fabric outsole prevents damage to the workpiece and offers excellent gliding behaviour and scratch resistance. The milling cutter can be changed quickly and easily thanks to the practical spindle stop. With a transparent extraction bonnet, which also acts as a guide and extracts dust, the router ensures clean working conditions. The Bluetooth® battery pack enables convenient auto-start of the vacuum cleaner, which further increases work efficiency. The brushless, quiet EC-TEC motor offers high pulling power and ensures a long service life thanks to temperature monitoring. The speed can be individually adjusted to prevent burn marks and maximise working comfort. With this cordless edge router, you can quickly and precisely round off edges, apply bevelled edges to squared timber, block frames and panels, and mill flush edging and mouldings. The low weight and ergonomic design make the Festool OFKC 500 R3 EB-Basic a handy and efficient tool that offers outstanding performance both in the workshop and on the construction site.
Technical Data:
- Manufacturer: Festool
- Manufacturer's designation: OFKC 500 R3 EB
- Idle speed: 10 000 - 25 000 min-¹
- Max. Cutter diameter: 28.00 mm
- Cutter stroke (fine adjustment): 10.00 mm
- Dust extraction connection (diameter): 27 mm
- Product weight without accessories: 1.30 kg
- Transport weight incl. accessories: 3.50 kg
- Drive type: Battery
- Battery voltage (nominal voltage): 18 V
- Milling: Uncertainty (vibration) K: 1.50 m/s²
- Tiller: Uncertainty (noise) K: 1.50 dB
- Tiller: Total vibration mean value ah: 2.50 m/s²
- Milling: Standards series EN: 62841
- Milling: A-weighted sound pressure level Lp: 82.00 dB(A)
- Milling: A-weighted sound power level Lw: 90.00 dB(A)
- For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
Scope of Delivery:
- 1x Festool HKC 55 KEB-Basic cordless portable circular saw
- 1x circular saw blade HW 160x1.6x20 W18 ( 578583 )
- 1x Allen key SW 5
- 1x Festool SYS3 M 337 Systainer³
- without battery, without charger
Product Description:
The Festool HKC 55 K cordless portable circular saw offers you the ideal combination of power, flexibility and precision for a wide range of applications, both on the roof and on the ground. With the powerful, brushless EC-TEC motor technology and a speed of 5,200 rpm¹ as well as lithium-ion batteries, you can achieve outstanding cutting performance and maximum battery life to tackle any project efficiently and quickly. Work is made particularly convenient by the ability to make fast, precise angular cross-cuts with the FSK cross-cut rail and achieve precise cuts with the FS guide rail. The innovative KickbackStop and the integrated guide wedge offer you additional safety when working, while the pendulum bonnet remote control and the spring-assisted plunge function simplify handling and provide you with a comfortable working experience. With the specially developed 1.6 mm thin-cutting saw blades, you can not only work quickly, but also achieve an extended battery life without compromising on cutting quality. The HKC 55 K is ideal for mitre cuts, as the angle adjustment with central clamping from 0 to 50° enables precise adjustment. It is versatile and can be easily combined with the tried-and-tested guide rails for precise cutting of both longitudinal and cross cuts up to a material thickness of 55 mm. The cordless portable circular saw is ideal for mobile use on the construction site and is perfect for cutting roof battens, profiled boards or for cutting shuttering boards, formwork and panel material such as OSB or chipboard.
Technical Data:
- Manufacturer: Festool
- Manufacturer's designation: HKC 55 KEB-Basic
- Manufacturer number: 578302
- Cooling voltage (rated voltage): 18 V
- Idle speed: 5 200 min-¹
- Saw blade diameter: 160.00 mm
- Angle range: 0 - 50 °
- Cutting depth 0°; 90°: 0 - 55 mm
- Cutting depth 45°/50°: 42/38 mm
- Dust extraction connection (diameter): 27/36 mm
- Product weight without accessories: 3.60 kg
- Transport weight incl. accessories: 6.50 kg
- Drive type: Battery
- Sawing wood: Total average vibration value ah: 2.50 m/s²
- Sawing wood: A-weighted sound pressure level Lp: 91.00 dB(A)
- Sawing wood: Uncertainty (noise) K: 3.00 dB
- Sawing wood: A-weighted sound power level Lw: 99.00 dB(A)
- Sawing wood: Standards series EN: 62841
- Sawing wood: Uncertainty (vibration) K: 1.50 m/s²
- For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
Scope of Delivery:
- 1x Festool MFKC 700 KA EB-Basic cordless module edge router
- 1x collet SZ-D 8/OF 1010 ( 488755 )
- 1x open-end spanner SW 19
- 1x Festool SYS3 M 187 Systainer³
- without battery, without charger
Product Description:
The Festool MFKC 700 KA EB cordless module edge router is specially designed for precise flush routing and rounding of plastic and veneer edges and offers maximum flexibility and manoeuvrability for edge processing. Thanks to its optimum centre of gravity, it can be guided safely without tilting, ensuring precise results. The antistatic dust extraction system effectively discharges chips upwards, enabling trouble-free working and ensuring that the routing result is not impaired. The powerful brushless EC-TEC motor ensures high pulling power and makes the router particularly mobile and convenient to use without cables getting in the way. The router is equipped with a routing depth that can be adjusted to an accuracy of 1/10 mm, enabling the finest adjustments to be made for perfect results. All standard milling cutters up to a diameter of 32 mm can be used thanks to the 8 mm collet chuck. The hard fabric outsole protects the workpiece from damage and ensures excellent gliding behaviour and scratch resistance. The large, 130 mm long router table support guarantees a stable hold and precise results. Simple cutter changes are quick and easy thanks to the practical spindle stop. With the unique ball bearing brake, the tiller ensures streak-free work results and a long service life for the motor, which is protected by temperature monitoring. The router is perfect for flush routing 0° to 45° bevelled edges (depending on the router) and can be combined perfectly with the CONTURO KA 65 edge banding machine. Another highlight is the direct suction at the router table, which ensures a clean working environment, while the auto-start function of the suction cup with the Bluetooth® battery pack offers additional convenience. Thanks to its slim design and low weight, the MFKC 700 KA EB is particularly easy to handle and ensures fatigue-free working.
Technical Data:
- Manufacturer: Festool
- Manufacturer designation: MFKC 700 KA EB-Basic
- Manufacturer number: 578013
- Battery voltage (rated voltage): 18 V
- Idle speed: 10 000 - 25 000 min-¹
- Collet diameter: 6 - 8 mm
- Cutter stroke (fine adjustment): 14.00 mm
- Max. Cutter diameter: 32.00 mm
- Dust extraction connection (diameter): 27 mm
- Product weight without accessories: 1.80 kg
- Transport weight incl. accessories: 4.10 kg
- Drive type: Battery
- Milling: Uncertainty (vibration) K: 1.50 m/s²
- Milling: Uncertainty (noise) K: 3.00 dB
- Tiller: Total vibration mean value ah: 2.50 m/s²
- Milling: Standards series EN: 62841
- Milling: A-weighted sound pressure level Lp: 82.00 dB(A)
- Milling: A-weighted sound power level Lw: 90.00 dB(A)
- For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
Scope of Delivery:
- 1x Festool OFKC 500 R3 EB-Basic cordless edge router
- 1x rounding cutter HW R3-OFK 500 Z1 ( 578378 )
- 1x thrust ball bearing KLS-D 15.8-OFK ( 490249 )
- 1x extraction bonnet with ball bearing brake
- 1x spring plate ball bearing brake
- 1x Systainer³ SYS3 M 187 ( 204842 )
- without battery, without charger
Product Description:
The Festool OFKC 500 R3 EB-Basic cordless edge router offers an excellent combination of precision, mobility and flexibility. Thanks to its balanced centre of gravity and slim design, it enables tilt-proof routing and is particularly easy to guide. The battery-powered drive ensures maximum manoeuvrability and cordless operation, offering more freedom and room to move. The 1/10 mm accurate routing depth adjustment enables precise and clean results without reworking, while the stable connection between the router and drive ensures maximum concentricity. The OFKC 500 is optimised for various milling applications, with optimum coordination of all milling cutters (R1 - 6, chamfers, flush) to the outsole bore. The hard fabric outsole prevents damage to the workpiece and offers excellent gliding behaviour and scratch resistance. The milling cutter can be changed quickly and easily thanks to the practical spindle stop. With a transparent extraction bonnet, which also acts as a guide and extracts dust, the router ensures clean working conditions. The Bluetooth® battery pack enables convenient auto-start of the vacuum cleaner, which further increases work efficiency. The brushless, quiet EC-TEC motor offers high pulling power and ensures a long service life thanks to temperature monitoring. The speed can be individually adjusted to prevent burn marks and maximise working comfort. With this cordless edge router, you can quickly and precisely round off edges, apply bevelled edges to squared timber, block frames and panels, and mill flush edging and mouldings. The low weight and ergonomic design make the Festool OFKC 500 R3 EB-Basic a handy and efficient tool that offers outstanding performance both in the workshop and on the construction site.
Technical Data:
- Manufacturer: Festool
- Manufacturer designation: OFKC 500 R3 EB
- Manufacturer number: 577985
- Idle speed: 10 000 - 25 000 min-¹
- Max. Cutter diameter: 28.00 mm
- Cutter stroke (fine adjustment): 10.00 mm
- Dust extraction connection (diameter): 27 mm
- Product weight without accessories: 1.30 kg
- Transport weight incl. accessories: 3.50 kg
- Drive type: Battery
- Battery voltage (nominal voltage): 18 V
- Milling: Uncertainty (vibration) K: 1.50 m/s²
- Tiller: Uncertainty (noise) K: 1.50 dB
- Tiller: Total vibration mean value ah: 2.50 m/s²
- Milling: Standards series EN: 62841
- Milling: A-weighted sound pressure level Lp: 82.00 dB(A)
- Milling: A-weighted sound power level Lw: 90.00 dB(A)
- For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
Scope of Delivery:
- 1x Festool DFC 500 E-Basic cordless dowel cutter
- 1x DOMINO milling cutter D 5-NL 20 HW-DF 500 ( 493490 )
- 1x open-end spanner SW 8
- 1x additional fence ( 495666 )
- 1x Systainer³ SYS3 M 187 ( 204842 )
- without battery, without charger
Product Description:
The Festool DFC 500 E-Basic cordless dowel cutter is the perfect solution for precise, stable and versatile wood joints. Part of the innovative DOMINO jointing system, this cordless dowel router enables the routing of precise, torsion-proof slotted holes using the unique pendulum routing principle. This system combines the stability of traditional mortise and tenon joints with the flexibility of flat dowels, so that both delicate and solid workpieces can be joined indoors and outdoors without any problems. Particularly noteworthy is the 100% mobility of the cordless version, which enables cordless use both in the workshop and on the construction site. The ergonomic spade handle ensures fatigue-free working, even during long periods of use. Integrated stop pins make it easier to position the dowels repeatedly and precisely, further increasing efficiency at work. The DOMINO dowels are available in various sizes from 4 x 20 mm to 10 x 50 mm and are perfectly matched to the routing depths, which are optimised for the dowel lengths and panel materials. The stable and torsion-resistant connections achieved by the special shape of the DOMINO dowels guarantee high quality and durability. The system is extremely versatile and supports various applications such as frame and rack joints in solid wood, panel joints in different materials as well as the production of stable mitre joints and detachable corner joints. In addition, the round stop enables precise round profile connections, and the DOMINO carcase and furniture connectors can be used to create stable, detachable furniture constructions.
Technical Data:
- Manufacturer: Festool
- Manufacturer designation: DFC 500 E
- Manufacturer number: 578120
- Idle speed: 18 500 min-¹
- Depth stop for routing depth: 12, 15, 20, 25, 28 mm
- Max. Milling depth: 28.00 mm
- DOMINO slot milling cutter diameter: 4, 5, 6, 8, 10 mm
- Milling height adjustment: 5 - 30 mm
- Mitre routing: 0 - 90 °
- Dust extraction connection (diameter): 27 mm
- Drive type: Battery
- Product weight without accessories: 3.40 kg
- Transport weight incl. accessories: 6.00 kg
- Battery voltage (rated voltage): 18 V
- Milling: Uncertainty (vibration) K: 1.50 m/s²
- Milling: Uncertainty (noise) K: 1.50 dB
- Tiller: Total vibration mean value ah: 2.50 m/s²
- Milling machines: Standards series EN: 60745-2-19
- Milling: A-weighted sound pressure level Lp: 87.00 dB(A)
- Milling: A-weighted sound power level Lw: 98.00 dB(A)
- For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
Scope of Delivery:
- 1x Festool TDC 18/4 cordless drill driver
- 1x Festool PZ 2 bit
- 1x Festool CENTROTEC magnetic bit holder BH 60 CE-Imp
- 1x Festool CENTROTEC tool chuck
- 1x Festool FastFix quick-action drill chuck 13 mm KC 13-1/2-MMFP
- 1x Festool additional handle
- 1x Festool SYS3 M 187 Systainer
Product Description:
With the TDC 18/4, Festool offers a powerful cordless drill driver for the highest demands. The combination of a handy design and enormous power enables comfortable and effective working. Thanks to the 4 different gears, the drill driver can be optimised for all applications. This means that screwing with 50 Nm is just as possible in 1st gear as drilling in 4th gear at 3600 rpm. The brushless EC-TEC motor combines enormous resilience and endurance with low wear and therefore a long service life. Thanks to the FastFix interface, the attachments can be changed quickly and without tools. The KickbackStop function minimises the risk of serious injury when the drill driver jams by stopping the motor, thereby protecting the user's health. Festool is a premium manufacturer of power tools that is characterised above all by its long tradition and very high quality workmanship.
Technical Data:
- Manufacturer: Festool
- Manufacturer's designation: TDC 18/4
- Manufacturer number: 575601
- Battery voltage: 18 V
- Gears: 4
- Idle speed 1st/2nd gear: 0 - 500/0 - 800 min-¹
- Idle speed 3rd/4th gear: 0 - 2350/0 - 3600 min-¹
- Drilling diameter wood/steel: 70/13 mm
- Torque setting 1st/2nd gear: 2 - 20/2 - 20 Nm
- Max. Torque wood/steel: 50/75 Nm
- Drill chuck clamping width: 1.5 - 13 mm
- Battery capacity: 4.0/5.2 Ah
- Product weight with battery: 1.9/2.0 kg
- Drive type: Battery
- Drilling in metal: Total average vibration value ah: 3.00 m/s²
- Drilling in metal: Standards series EN: 62841
- Drilling in metal: Uncertainty (noise) K: 5.00 dB
- Drilling in metal: Uncertainty (vibration) K: 1.50 m/s²
- Drilling in metal: A-weighted sound pressure level Lp: 73.00 dB(A)
- Drilling in metal: A-weighted sound power level Lw: 84.00 dB(A)
- Screws: Total average vibration value ah: 2.50 m/s²
- Screws: Standards series EN: 62841
- Screws: Uncertainty (noise) K: 5.00 dB
- Screws: Uncertainty (vibration) K: 1.50 m/s²
- Screws: A-weighted sound pressure level Lp: 73.00 dB(A)
- Screws: A-weighted sound power level Lw: 84.00 dB(A)
- For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
Package contents:
- 1x Festool CTLC SYS Cordless Mobile Dust Extractor
- 1x Main filter (HF-CT SYS)
- 1x Filter bag
- 1x Suction hose (D 27x3m-AS-90°/CT)
- 1x Upholstery nozzle (D 36 PD)
- 1x Crevice nozzle (D 36 FD-150)
- 1x Shoulder strap (SYS-TG)
- 1x Remote control (CT-F I)
- without battery, without charger
Product description:
Festool presents CTLC SYS I-Basic, a cordless mobile dust extractor that looks like a Systainer from the outside and operates with two 18V batteries. It is therefore very handy. It combines maximum mobility with maximum suction power. It is equipped with a strap that allows it to be carried comfortably or coupled to a Systainer owing to its T-LOC connection and thus prepare the tool for immediate use. Its 36V turbine powered by two 18V batteries makes it similar to a corded dust extractor. Its suction power can be adjusted to 3 different levels. It also features a Bluetooth system, which can be easily switched on using the remote control attached to the suction hose. This saves the battery while the dust is still sucked up immediately. Festool is a manufacturer of high-quality tools that stands out above all for its ingenious systems and high quality workmanship.
Technical specifications:
Manufacturer: Festool
Manufacturer's designation: CTLC SYS
Manufacturer number: 576936
Voltage: 36V (2x 18 V)
Container volume: 4.5 l
Weight (with battery packs): 8.8 kg (at 4.0 Ah)
Compatible with the following battery packs: 4.0 Ah
Max. volume flow: 2400.00 l/min
Max. vacuum: 18000,00 Pa
Filter surface area: 5357.00 cm²
Container/filter bag capacity: 4.5 / 3.5 l
Dimensions (L x W x H): 396 x 297 x 307 mm
Dust class: L
Running time 2 x 4.0 Ah: 14 - 25 min
Lieferumfang:- 1x Festool TPC 18/4 Akku Schlagbohrschrauber- 1x FastFix Schnellspannbohrfutter 13 mm KC 13-1/2-MMFP- 1x Zusatzhandgriff- 1x Systainer SYS3 M 187- ohne Akku, ohne Ladegerät
Zustand:
- Neuwertig- UNVOLLSTÄNDIG: - 1x Bit PZ 2 fehlt, 1x CENTROTEC Magnet Bithalter BH 60 CE-Imp fehlt, 1x CENTROTEC Werkzeugfutter fehlt, 1x Gürtelclip fehlt- Voll funktionfähig- sofort Lieferbar
Produktbeschreibung:Die Firma Festool bietet hier mit dem TPC 18/4 einen kraftvollen Akku Schlagbohrschrauber mit für allerhöchste Ansprüche. Die Kombination aus handlicher Bauform und enormer Leistungsstärke ermöglicht ein komfortables und effektives arbeiten. Durch die 4 unterschiedlichen Gänge lässt sich der Bohrschrauber für alle Anwendungen optimal einstellen. Somit ist im 1. Gang ein Schrauben mit 50 Nm genauso möglich wie ein Bohren im 4. Gang mit 3600 U/min. Der bürstenlose EC-TEC Motor kombiniert enorme Belastbarkeit und Ausdauer mit einem niedrigen Verschleiß und dadurch langen Lebensdauer. Durch die FastFix Schnittstelle lassen sich die Aufsätze schnell und werkzeuglos wechseln. Die KickbackStop Funktion minimiert das Risiko schwerer Verletzungen beim Blockieren des Bohrschraubers indem es den Motor stoppt und schützt damit die Gesundheit des Anwenders. Festool ist ein Premiumhersteller für Elektrowerkzeuge, der sich vor allem durch seine lange Tradition und seine sehr hohe Verarbeitungsqualität auszeichnet.Technische Daten:Hersteller: FestoolHerstellerbezeichnung: TPC 18/4Herstellernummer: 575604Akkuspannung: 18 VGänge: 4Leerlaufdrehzahl 1./2. Gang: 0 - 500/0 - 800 min⁻¹Leerlaufdrehzahl 3./4. Gang: 0 - 2350/0 - 3600 min⁻¹Max. Schlagzahl: 57600,00 min⁻¹Bohrdurchmesser Holz/Stahl: 70/13 mmBohrdurchmesser Mauerwerk (Ziegel): 10,00 mmDrehmomenteinstellung 1./2. Gang: 2 - 20/2 - 20 NmMax. Drehmoment Holz/Stahl: 50/75 NmBohrfutterspannweite: 1,5 - 13 mmAkkukapazität: 4,0/5,2 AhProduktgewicht mit Akku: 1,9/2,0 kgAntriebsart: AkkuSchlagbohren in Beton: Gesamt-Schwingungsmittelwert ah: 14,00 m/s²Schlagbohren in Beton: Normenreihe EN: 62841Schlagbohren in Beton: Unsicherheit (Lärm) K: 5,00 dBSchlagbohren in Beton: Unsicherheit (Vibration) K: 1,50 m/s²Schlagbohren in Beton: A-bewerteter Schalldruckpegel Lp: 94,00 dB(A)Schlagbohren in Beton: A-bewerteter Schallleistungspegel Lw: 105,00 dB(A)Bohren in Metall: Gesamt-Schwingungsmittelwert ah: 3,00 m/s²Bohren in Metall: Normenreihe EN: 62841Bohren in Metall: Unsicherheit (Lärm) K: 5,00 dBBohren in Metall: Unsicherheit (Vibration) K: 1,50 m/s²Bohren in Metall: A-bewerteter Schalldruckpegel Lp: 73,00 dB(A)Bohren in Metall: A-bewerteter Schallleistungspegel Lw: 84,00 dB(A)Schrauben: Gesamt-Schwingungsmittelwert ah: 2,50 m/s²Schrauben: Normenreihe EN: 62841Schrauben: Unsicherheit (Lärm) K: 5,00 dBSchrauben: Unsicherheit (Vibration) K: 1,50 m/s²Schrauben: A-bewerteter Schalldruckpegel Lp: 73,00 dB(A)Schrauben: A-bewerteter Schallleistungspegel Lw: 84,00 dB(A)Bei gewerblicher Nutzung beachten Sie bitte die Bauvorschriften!
Scope of Delivery:
- 1x Festool TSC 55 KEB-Basic 100Y Limited Edition cordless plunge-cut saw
- 1x circular saw blade WOOD FINE CUT HW 160x1,8x20 WD42 ( 205553 )
- 1x splinter guard
- 1x viewing window
- 1x dust collection bag SB-TSC ( 500393 )
- 1x hexagon socket spanner SW 5
- 1x 100-year cap GC-FT4 100Y ( 578386 )
- 2x Festool HighPower battery pack BP 18 Li 8,0 HP-ASI battery
- 1x Festool 100 years Systainer SYS3 M 437
- without charger
Product Description:
The Festool TSC 55 KEB-Basic 100Y Limited Edition cordless plunge-cut saw is the centrepiece of a special anniversary promotion to mark Festool's 100th anniversary - packaged in an exclusive 100-year Systainer³ and including a matching cap. It symbolises Festool's commitment to professional craftsmanship since 1925 and offers a combination of performance, safety and precision that only a Festool can provide. Its innovative KickbackStop not only protects the workpiece, but also your hands: if the system detects a kickback, it stops the rotating saw blade faster than the blink of an eye, effectively minimising the risk of injury - even when plunging into the material. With its brushless EC-TEC motor and the combination of powerful lithium-ion batteries, the TSC 55 KEB achieves impressive results: up to twice as fast cuts with a longer saw blade life. For particularly demanding tasks, the KickbackStop can also be deactivated if required. In combination with the machine, the new generation of saw blades ensures maximum cutting performance and first-class cutting quality - with a material thickness of up to 55 mm. Whether recesses in doors and kitchen worktops, shadow gaps, expansion joints in parquet floors or precise panel cutting - this plunge-cut saw is ideally equipped for all challenges. In combination with clever system accessories such as guide rails, angle fence, splinter guard or saw table, it becomes a real professional tool for mobile use. The Festool TSC 55 KEB 100Y Limited Edition is not only a powerful tool, but also a statement for quality, innovation and 100 years of passion for craftsmanship.
Technical Data:
- Manufacturer: Festool
- Manufacturer's designation: TSC 55 KEB-Basic 100Y Limited Edition
- Battery voltage: 18 / 36 V
- Idle speed: 2650 - 3800 / 5200 min-¹
- Saw blade diameter: 160 mm
- Angle range: -1 - 47 °
- Cutting depth: 0 - 55 mm
- Cutting depth 45°: 43 mm
- Dust extraction connection: 27 / 36 mm
- Product weight without accessories: 3.60 kg
- Transport weight incl. accessories: 7.72 kg
- Drive type: Battery
- Sawing metal: A-weighted sound pressure level Lp: 96.00 dB(A)
- Sawing metal: Total vibration mean value ah: 2.50 m/s²
- Sawing metal: Uncertainty (vibration) K: 2.00 m/s²
- Sawing metal: A-weighted sound power level Lw: 104.00 dB(A)
- Sawing metal: Standard series EN: 62841
- Sawing metal: Uncertainty (noise) K: 1.50 dB
- Sawing wood: Total vibration mean value ah: 2.50 M/s²
- Sawing wood: A-weighted sound pressure level Lp: 96.00 dB(A)
- Sawing wood: Uncertainty (noise) K: 1.50 dB
- Sawing wood: A-weighted sound power level Lw: 104.00 dB(A)
- Sawing wood: Standards series EN: 62841
- Sawing wood: Uncertainty (vibration) K: 2.00 m/s²
- For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
Scope of Delivery:
- 1x Festool KSC 60 EB KAPEX cordless crosscut saw
- 1x WOOD UNIVERSAL HW 216 x 2.3 x 30 W36 circular saw blade
- 1x A-SYS-KS 60 elevation
- 1x LED impact light
- 1x FSZ 120 screw clamp
- 1x dust bag
- 1x angle clamp
- 1x Allen key SW 6
- 2x Festool HighPower battery pack BP 18 Li 8.0 HP-ASI ( 577323 )
- without charger
Product Description:
The Festool KAPEX KSC 60 EB-Basic cordless mitre saw impresses with its outstanding precision and impressive versatility, making it an indispensable tool for professional craftsmen and ambitious DIY enthusiasts alike. Thanks to the mitre angle of up to 60 degrees on both sides and the tilt angle of up to 46 or 47 degrees on both sides, a wide range of cutting angles can be achieved with ease and precision. Particularly noteworthy is the double-bearing double-column guide, which guarantees precise and smooth saw blade guidance - this ensures that every cut is made precisely and without wobbling or jerking. The KAPEX KSC 60 is also designed to work with the right material. With different saw blades for different materials and a practical speed preselector for adjusting the speed to the respective material, the saw is perfectly prepared for any challenge. The dust collection bag supplied ensures a clean working environment even when working without a mobile dust extractor, as it effectively collects the dust and thus improves the air quality. The LED impact light technology ensures maximum precision, displaying the cutting line exactly and providing an optimum view of the cut. The angle bevel, which helps with the transfer of internal and external angles, and the clearly visible angle scale, which enables precise angle adjustment via locking points or individual clamping, also help the user to keep an eye on every detail. All in all, the Festool KAPEX KSC 60 EB-Basic cordless mitre saw offers everything you need for precise, versatile and comfortable mitre cuts. It combines maximum performance, precise cutting and well thought-out details that make working with it a professional and pleasant experience.
Technical Data:
- Manufacturer: Festool
- Manufacturer's designation: KSC 60 EB
- Idle speed: 1300 - 1800/3500 min-¹
- Battery voltage (rated voltage): 2 x 18 V
- Saw blade Ø: 216.00 mm
- Cutting depth 90°/90°: 305 x 60 mm
- Cutting depth 45°/90° : 215 x 60 mm
- Cutting depth 45°/45° (left): 215 x 40 mm
- Cutting depth 45°/45° (right): 215 x 20 mm
- Tilt angle: 47/46 °
- Mitre angle: 60/60 °
- Cutting depth 60°/90°: 150 x 60 mm
- Dimensions (WxDxH): 639 x 459 x 442 mm
- Dust extraction connection Ø : 27/36 mm
- Drive type: Battery
- Product weight without accessories: 17.30 kg
- Transport weight incl. accessories: 22.00 kg
- Saws: Total vibration mean value ah: 2.50 m/s²
- Saws: Series of standards: EN 62841
- Saws: Uncertainty (noise) K: 3.00 dB
- Saws: A-weighted sound power level: Lw101.00 dB(A)
- Saws: A-weighted sound pressure level: Lp 88.00 dB(A)
- Sawing: Uncertainty (vibration) K: 1.50 m/s²
- For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
Scope of Delivery:
- 1x Festool TSC 55 KEB-Basic 100Y Limited Edition cordless plunge-cut saw
- 1x circular saw blade WOOD FINE CUT HW 160x1,8x20 WD42 ( 205553 )
- 1x splinter guard
- 1x viewing window
- 1x dust collection bag SB-TSC ( 500393 )
- 1x hexagon socket spanner SW 5
- 1x 100-year cap GC-FT4 100Y ( 578386 )
- 4x Festool HighPower battery pack BP 18 Li 8,0 HP-ASI battery
- 1x Festool TCL 6 DUO double quick charger
- 1x Festool 100 years Systainer SYS3 M 437
Product Description:
The Festool TSC 55 KEB-Basic 100Y Limited Edition cordless plunge-cut saw is the centrepiece of a special anniversary promotion to mark Festool's 100th anniversary - packaged in an exclusive 100-year Systainer³ and including a matching cap. It symbolises Festool's commitment to professional craftsmanship since 1925 and offers a combination of performance, safety and precision that only a Festool can provide. Its innovative KickbackStop not only protects the workpiece, but also your hands: if the system detects a kickback, it stops the rotating saw blade faster than the blink of an eye, effectively minimising the risk of injury - even when plunging into the material. With its brushless EC-TEC motor and the combination of powerful lithium-ion batteries, the TSC 55 KEB achieves impressive results: up to twice as fast cuts with a longer saw blade life. For particularly demanding tasks, the KickbackStop can also be deactivated if required. In combination with the machine, the new generation of saw blades ensures maximum cutting performance and first-class cutting quality - with a material thickness of up to 55 mm. Whether recesses in doors and kitchen worktops, shadow gaps, expansion joints in parquet floors or precise panel cutting - this plunge-cut saw is ideally equipped for all challenges. In combination with clever system accessories such as guide rails, angle fence, splinter guard or saw table, it becomes a real professional tool for mobile use. The Festool TSC 55 KEB 100Y Limited Edition is not only a powerful tool, but also a statement for quality, innovation and 100 years of passion for craftsmanship.
Technical Data:
- Manufacturer: Festool
- Manufacturer's designation: TSC 55 KEB-Basic 100Y Limited Edition
- Battery voltage: 18 / 36 V
- Idle speed: 2650 - 3800 / 5200 min-¹
- Saw blade diameter: 160 mm
- Angle range: -1 - 47 °
- Cutting depth: 0 - 55 mm
- Cutting depth 45°: 43 mm
- Dust extraction connection: 27 / 36 mm
- Product weight without accessories: 3.60 kg
- Transport weight incl. accessories: 7.72 kg
- Drive type: Battery
- Sawing metal: A-weighted sound pressure level Lp: 96.00 dB(A)
- Sawing metal: Total vibration mean value ah: 2.50 m/s²
- Sawing metal: Uncertainty (vibration) K: 2.00 m/s²
- Sawing metal: A-weighted sound power level Lw: 104.00 dB(A)
- Sawing metal: Standard series EN: 62841
- Sawing metal: Uncertainty (noise) K: 1.50 dB
- Sawing wood: Total vibration mean value ah: 2.50 M/s²
- Sawing wood: A-weighted sound pressure level Lp: 96.00 dB(A)
- Sawing wood: Uncertainty (noise) K: 1.50 dB
- Sawing wood: A-weighted sound power level Lw: 104.00 dB(A)
- Sawing wood: Standards series EN: 62841
- Sawing wood: Uncertainty (vibration) K: 2.00 m/s²
- For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
Scope of Delivery:
- 1x Festool TPC 18/4 cordless impact drill
- 1x PZ 2 bit
- 1x BKS SYS3 D6 PZ TX 50 CE bit cassette
- 1x CENTROTEC magnetic bit holder BH 60 CE-Imp
- 1x FastFix quick-action drill chuck 13 mm KC 13-1/2-MMFP
- 1x angle attachment AN-UNI
- 1x Tool chuck WH-CE CENTROTEC
- 1x additional handle
- 1x belt clip
- 1x Systainer SYS3 DF M 192
- 2x Festool BP 18 Li 8.0 HP-ASI battery 18 V 8.0 Ah ( 577323 )
- 1x Festool SCA 16 quick charger 10.8 V - 18 V 16 A ( 576953 )
Product Description:
With the TPC 18/4, Festool offers a powerful cordless impact drill for the highest demands. The combination of a handy design and enormous power enables comfortable and effective work. Thanks to the 4 different gears, the drill driver can be optimised for all applications. This means that screwing with 50 Nm is just as possible in 1st gear as drilling in 4th gear at 3600 rpm. The brushless EC-TEC motor combines enormous resilience and endurance with low wear and therefore a long service life. Thanks to the FastFix interface, the attachments can be changed quickly and without tools. The KickbackStop function minimises the risk of serious injury when the drill driver jams by stopping the motor, thereby protecting the user's health. Festool is a premium manufacturer of power tools that is characterised above all by its long tradition and very high quality workmanship.
Technical Data:
- Manufacturer: Festool
- Manufacturer's designation: TPC 18/4
- Manufacturer number: 577625
- Battery voltage: 18 V
- Gears: 4
- Idle speed 1st/2nd gear: 0 - 500/0 - 800 min-¹
- Idle speed 3rd/4th gear: 0 - 2350/0 - 3600 min-¹
- Max. Impact speed: 57600.00 min-¹
- Drilling diameter wood/steel: 70/13 mm
- Drilling diameter masonry (brick): 10.00 mm
- Torque setting 1st/2nd gear: 2 - 20/2 - 20 Nm
- Max. Torque wood/steel: 50/75 Nm
- Drill chuck clamping width: 1.5 - 13 mm
- Product weight without accessories: 1.30 kg
- Transport weight incl. accessories: 5.00 kg
- Drive type: Battery
- Impact drilling in concrete: Total vibration mean value ah: 14.00 m/s²
- Impact drilling in concrete: Standards series EN: 62841
- Impact drilling in concrete: Uncertainty (noise) K: 5.00 dB
- Impact drilling in concrete: Uncertainty (vibration) K: 1.50 M/s²
- Impact drilling in concrete: A-weighted sound pressure level Lp: 94.00 dB(A)
- Impact drilling in concrete: A-weighted sound power level Lw: 105.00 dB(A)
- Drilling in metal: Overall vibration mean value ah: 3.00 m/s²
- Drilling in metal: Standards series EN: 62841
- Drilling in metal: Uncertainty (noise) K: 5.00 dB
- Drilling in metal: Uncertainty (vibration) K: 1.50 m/s²
- Drilling in metal: A-weighted sound pressure level Lp: 73.00 dB(A)
- Drilling in metal: A-weighted sound power level Lw: 84.00 dB(A)
- Screws: Overall vibration mean value ah: 2.50 m/s²
- Screws: Standards series EN: 62841
- Screws: Uncertainty (noise) K: 5.00 dB
- Screws: Uncertainty (vibration) K: 1.50 m/s²
- Screws: A-weighted sound pressure level Lp: 73.00 dB(A)
- Screws: A-weighted sound power level Lw: 84.00 dB(A)
- For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
