Direkt ist günstiger für Dich!

Wusstest du, dass Preisvergleich-Plattformen und Suchmaschinen bei jedem Kauf fett mitverdienen? Über 20 % vom Preis gehen nur für Werbung drauf – und das zahlen am Ende alle mit. Wir sagen: Nein danke und möchten die Werbekosten lieber als Preisreduktion an Euch weitergeben!

Aus diesem Grund übermitteln wir nicht mehr unseren gesamten Bestand, die Bestpreis-Angebote und Deals an die großen Plattformen und können Dir so - neben den Geschenken, BROpoints und anderen Vorteilen - wesentlich bessere Preise geben, die Du ausschließlich bei uns findest. Deswegen lohnt es sich, ohne Umwege, direkt zu uns zu kommen.

Initiative für bessere Preise und mehr Fairness im Online-Handel.

Finde hier ALLE ANGEBOTE, für die wir derzeit den Online-Bestpreis haben.

Drill Bits

Show previous products

Options

EXACT Exact step drill set 3 pcs. 4 - 30 mm 1/4" ( 08014 ) HSS TIN spiral fluted

Scope of Delivery: - 3x step drill ( 4 - 12 / 4 - 20 / 6 - 30 mm ) - 1x plastic cassette Product Description: With the 3-piece stepped drill bit set from EXACT, drilling with millimetre precision is no problem at all. With the step drills, which come in three different sizes (4 - 12; 4 - 20 and 6 - 30 mm), the drilling diameter can be determined with millimetre precision thanks to the laser scaling. A major advantage is the 1/4 inch bit shank, which allows the step drill to be used with any drill with a quick-release chuck. The HSS TIN drill bits have a titanium-nitride coating to achieve a longer service life and cutting speed, as well as good heat resistance. They therefore have a high tool quality and a long service life is guaranteed. These drill bits are therefore also suitable for materials with a tensile strength of less than 1000 N/mm². The step drill bit set is supplied in a high-quality plastic case, in which the drill bits are well organised and always ready to hand. Technical Data: - Manufacturer: EXACT - Manufacturer number: 08014 - Material: HSS TIN steel - Drill bit sizes: 4 - 12 / 4 - 20 / 6 - 30 mm - Shank: 1/4 inch bit shank - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Pre-order
CHF 67.77

Options
Options

EXACT Exact step drill set 3 pcs. 4 - 30 mm ROTASTOP ( 07024 ) HSS TIALN spiral fluted

Scope of Delivery: - 3x step drill ( 4 - 12 / 4 - 20 / 6 - 30 mm ) - 1x plastic cassette Product Description: With the 3-piece stepped drill bit set from EXACT, drilling with millimetre precision is no problem at all. With the step drills, which come in three different sizes (4 - 12; 4 - 20 and 6 - 30 mm), the drilling diameter can be determined with millimetre precision thanks to the laser scaling. A major advantage is the ROTASTOP shank, which prevents spinning in the drill chuck, ensures optimum torque transmission and guarantees easy tool changes. The HSS TIALN drill bits have a titanium-aluminium-nitride coating to achieve optimum tool life and maximum cutting speeds. This gives them outstanding tool quality and guarantees a very long service life. These drills are therefore suitable for alloyed steels with a tensile strength of up to 1200 N/mm². The step drill bit set is supplied in a high-quality plastic case, in which the drill bits are well organised and always ready to hand. Technical Data: - Manufacturer: EXACT - Manufacturer number: 07024 - Material: HSS TIALN steel - Drill bit sizes: 4 - 12 / 4 - 20 / 6 - 30 mm - Shank holder: ROTASTOP - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Pre-order
CHF 86.79

Options
Ruko RUKO twist drill DIN 338 type INOX nominal Ø 2.4 mm ( 4000600435 )

Sat, 11/29/2025

Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 2.4 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.05 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 14.92
Options

Ruko RUKO twist drill DIN 338 type INOX nominal Ø 3.8 mm ( 4000600452 )

Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 3.8 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.08 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!

Read more less

Pre-order
CHF 17.43

Options
Options

Ruko RUKO Spiralbohrer DIN 338 Typ N Nenn-Ø 2 mm ( 4000600285 )

Lieferumfang:Spiralbohrer DIN 338 Typ N Nenn-Ø 2 mmProduktbeschreibung:HSS · TiN-beschichtet · DIN 338 · Typ N · Spitzenwinkel 118 ° · rechtsschneidend · Kegelmantelanschliff, ab Ø 2,0 mm Kreuzanschliff nach DIN 1412 C · der komplett geschliffene Spiralbohrer verfügt über eine erhöhte Rundlaufgenauigkeit · Erzielung hoher Standzeiten bei erhöhten Schnittwerten · für Stahl, Stahlguss legiert und unlegiert (bis 1100 N/mm² Festigkeit nur bedingt geeignet), Grau-, Temper-, Sphäro- und Druckguss, Sintereisen, Neusilber, Graphit, kurzspanende Aluminiumlegierungen, Messing und Bronze · Leistungsstarker Spiralbohrer, geeignet für alle normalen Bohrarbeiten in allgemein gängigen Werkstoffen Weitere Größen auf Anfrage verfügbar.Technische Daten: Schneidrichtung: rechtsschneidend Vorschub in Stahl bis 800 N: 0,05mm/U Qualität: profilgeschliffen

Read more less

Pre-order
CHF 13.68

Options
Options

Ruko RUKO twist drill DIN 345 type N nominal Ø 26.5 mm ( 4000601330 )

Scope of Delivery: - Twist drill DIN 345 type N nominal Ø 26.5 mm Product Description: HSS-Co5 - DIN 345 - type N - point angle 118 ° - right-hand cutting - pointed cross cutting edge to DIN 1412 A - high-performance standard drill bit made from cobalt-alloyed HSS with higher heat resistance - ideal for drilling difficult-to-machine materials and for heavy-duty use - areas of application: for alloyed and unalloyed steel and cast steel (up to 1100 N/mm² strength), grey cast iron, malleable cast iron, high-chromium alloyed steels such as V2A and V4A, stainless and acid-resistant steels Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.15 mm/rev - Shank size: MK3 - Quality: profile groundFor commercial use, please observe the building regulations!

Read more less

Pre-order
CHF 55.34

Options
Options

Ruko RUKO twist drill DIN 338 type INOX nominal Ø 5.8 mm ( 4000600476 )

Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 5.8 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.09mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!

Read more less

Pre-order
CHF 24.31

Options
Ruko RUKO twist drill DIN 338 type N nominal Ø 2.2 mm ( 4000600135 )

Sat, 11/29/2025

Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 2.2 mm Product Description: HSS - DIN 338 - type N - point angle 118 ° - right-hand cutting - taper ground, cross ground from Ø 2.0 mm in accordance with DIN 1412 C - the fully ground twist drill has increased concentricity - for steel, alloyed and unalloyed cast steel (up to 900 N/mm² strength), Grey cast iron, malleable cast iron, nodular cast iron and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass and bronze - High-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.06mm/rev - Quality: profile ground - Nominal Ø tolerance: h8For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 10.61
Ruko RUKO twist drill DIN 345 type N nominal Ø 24.5 mm ( 4000601326 )

Sat, 11/29/2025

Scope of Delivery: - Twist drill DIN 345 type N nominal Ø 24.5 mm Product Description: HSS-Co5 - DIN 345 - type N - point angle 118 ° - right-hand cutting - pointed cross cutting edge to DIN 1412 A - high-performance standard drill bit made from cobalt-alloyed HSS with higher heat resistance - ideal for drilling difficult-to-machine materials and for heavy-duty use - areas of application: for alloyed and unalloyed steel and cast steel (up to 1100 N/mm² strength), grey cast iron, malleable cast iron, high-chromium alloyed steels such as V2A and V4A, stainless and acid-resistant steels Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.15 mm/rev - Shank size: MK3 - Quality: profile groundFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 49.15
Ruko RUKO twist drill DIN 345 type N nominal Ø 23 mm ( 4000601323 )

Sat, 11/29/2025

Scope of Delivery: - Twist drill DIN 345 type N nominal Ø 23 mm Product Description: HSS-Co5 - DIN 345 - type N - point angle 118 ° - right-hand cutting - pointed cross cutting edge to DIN 1412 A - high-performance standard drill bit made from cobalt-alloyed HSS with higher heat resistance - ideal for drilling difficult-to-machine materials and for heavy-duty use - areas of application: for alloyed and unalloyed steel and cast steel (up to 1100 N/mm² strength), grey cast iron, malleable cast iron, high-chromium alloyed steels such as V2A and V4A, stainless and acid-resistant steels Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.15 mm/rev - Shank size: MK2 - Quality: profile groundFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 43.39
Ruko RUKO twist drill DIN 338 type INOX nominal Ø 6.8 mm ( 4000600488 )

Sat, 11/29/2025

Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 6.8 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.11 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 29.50
Ruko RUKO twist drill DIN 338 type INOX nominal Ø 5.1 mm ( 4000600467 )

Sat, 11/29/2025

Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 5.1 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.08 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 20.20