Drill Bits
-
HELLER HELLER hammer drill Trijet Ultimate D.12,0mm Working-L.250mm L.310mm ( 4300000184 )
Fri, 10/10/2025
Scope of Delivery: - Hammer drill Trijet Ultimate D.12,0mm Working-L.250mm L.310mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!
CHF 29.32
-
HELLER HELLER hammer drill Trijet Ø 10 mm working l.250 mm l.310 mm ( 4300000183 )
Fri, 10/10/2025
Scope of Delivery: - Hammer drill Trijet Ø 10 mm working l.250 mm l.310 mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!
CHF 21.65
-
HELLER HELLER hammer drill Trijet Ultimate D.14,0mm Working-L.150mm L.200mm ( 4300000180 )
Fri, 10/10/2025
Scope of Delivery: - Hammer drill Trijet Ultimate D.14,0mm Working-L.150mm L.200mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!
CHF 26.11
-
HELLER HELLER hammer drill Trijet Ultimate D.8,0mm Working-L.150mm L.210mm ( 4300000177 )
Scope of Delivery: - Hammer drill Trijet Ultimate D.8,0mm Working-L.150mm L.210mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!
-
HELLER HELLER hammer drill Trijet Ultimate D.6,0mm Working-L.150mm L.210mm ( 4300000176 )
Fri, 10/10/2025
Scope of Delivery: - Hammer drill Trijet Ultimate D.6,0mm Working-L.150mm L.210mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!
CHF 17.16
-
HELLER HELLER hammer drill Trijet Ultimate D.10,0mm Working-L.100mm L.160mm ( 4300000174 )
Fri, 10/10/2025
Scope of Delivery: - Hammer drill Trijet Ultimate D.10,0mm Working-L.100mm L.160mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!
CHF 15.91
-
HELLER HELLER Hammer drill Trijet Ultimate D.5,0mm Working-L.100mm L.160mm ( 4300000171 )
Fri, 10/10/2025
Scope of Delivery: - Hammer drill Trijet Ultimate D.5,0mm Working-L.100mm L.160mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!
CHF 13.10
-
HELLER HELLER hammer drill Trijet Ultimate D.6,0mm Working-L.50mm L.110mm ( 4300000170 )
Fri, 10/10/2025
Scope of Delivery: - Hammer drill Trijet Ultimate D.6,0mm Working-L.50mm L.110mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!
CHF 13.10
-
HELLER HELLER hammer drill Trijet Ultimate D.5,0mm Working-L.50mm L.110mm ( 4300000169 )
Scope of Delivery: - Hammer drill Trijet Ultimate D.5,0mm Working-L.50mm L.110mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!
-
PFERD PFERD burr WRC Ø 6 mm Head length 16 mm Shank Ø 6 mm ( 4142100560 )
Scope of Delivery: - Burr WRC Ø 6 mm Head length 16 mm Shank Ø 6 mm Product Description: carbide - shank Ø 6 mm - form C, (WRC according to DIN 8033) - cylindrical form Technical Data: - nanFor commercial use, please observe the building regulations!
-
Ruko RUKO step drill bit drilling range 5.3 - 30.5 mm ( 4000601758 )
Fri, 10/10/2025
Scope of Delivery: - Step drill Drilling range 5.3 - 30.5 mm Product Description: HSS - spiral fluted - with cross cut - 2 cutting edges - for metric cable glands - point angle 118 ° - step angle 90 ° - shank with 3 clamping surfaces Technical Data: - Point angle: 118° - Step angle: 90° - Groove: spiral grooved - Number of cutting edges: 2For commercial use, please observe the building regulations!
CHF 56.93
-
Ruko RUKO step drill bit drilling range 6 - 37 mm ( 4000601725 )
Fri, 10/10/2025
Scope of Delivery: - Step drill Drilling range 6 - 37 mm Product Description: HSS-Co5 - spiral fluted - with cross cut - 2 cutting edges - point angle 118 ° - step angle 90 ° - shank with 3 clamping surfaces Technical Data: - Point angle: 118° - Step angle: 90° - Groove: spiral grooved - Number of cutting edges: 2For commercial use, please observe the building regulations!
CHF 84.90
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"