Drill Bits
-
Ruko RUKO step drill set ULTIMATECUT Ø 5-12/6-20/8-30 mm ( 4000865860 )
Fri, 10/10/2025
Scope of Delivery: - Step drill set ULTIMATECUT Ø 5-12/6-20/8-30 mm Product Description: HSS - RUnaTEC-coated - spiral fluted - with cross cut - 2 cutting edges - with FLOWSTEP® point - point angle 118 ° - step angle 90 ° - 3-face shank - right-hand cutting - precise centring without centre punching, even on round surfaces such as pipes - extremely fast and effortless drilling thanks to FLOWSTEP® point - easy and smooth drilling process - 3-face shank prevents spinning in the drill chuck - ideally suited for use on round surfaces such as pipes The FLOWSTEP® tip ensures extremely fast and effortless drilling - Smooth and quiet drilling process - 3-face shank prevents spinning in the drill chuck - Ideal for use in hand-held power tools - FLOWSTEP® technology on all steps: Smooth and seamless transition between the different diameters during the drilling process - Up to 2 times more holes due to extended tool life - Significantly improved drilling results - Extremely high wear resistance and heat hardness - Pitch: Ø5-12=1mm, Ø6-20=2mm, Ø8-30=2mm - In impact and break-proof plastic case Technical Data: - nanFor commercial use, please observe the building regulations!
CHF 116.61
-
Ruko RUKO step drill ULTIMATECUT drilling range 8-30 mm ( 4000865852 )
Fri, 10/10/2025
Scope of Delivery: - Step drill ULTIMATECUT drilling range 8-30 mm Product Description: HSS - RUnaTEC-coated - spiral fluted - with cross cut - 2 cutting edges - with FLOWSTEP® point - point angle 118 ° - step angle 90 ° - 3-face shank - right-hand cutting - precise centring without centre punching, even on round surfaces such as pipes - extremely fast and effortless drilling thanks to FLOWSTEP® point - easy and smooth drilling process - 3-face shank prevents spinning in the drill chuck - ideally suited for use on round surfaces such as pipes The FLOWSTEP® tip ensures extremely fast and effortless drilling - Smooth and quiet drilling process - 3-face shank prevents spinning in the drill chuck - Ideal for use in hand-held power tools - FLOWSTEP® technology on all steps: Smooth and seamless transition between the different diameters during the drilling process - Up to 2 times more holes due to extended tool life - Significantly improved drilling results - Extremely high wear resistance and hot hardness Technical Data: - Point angle: 118° - Step angle: 90° - Groove: spiral grooved - Number of cutting edges: 2For commercial use, please observe the building regulations!
CHF 71.48
-
Ruko RUKO step drill ULTIMATECUT drilling range 6-20 mm ( 4000865851 )
Fri, 10/10/2025
Scope of Delivery: - Step drill ULTIMATECUT drilling range 6-20 mm Product Description: HSS - RUnaTEC-coated - spiral fluted - with cross cut - 2 cutting edges - with FLOWSTEP® tip - tip angle 118 ° - step angle 90 ° - 3-face shank - right-hand cutting - precise centring without centre punching, even on round surfaces such as pipes - extremely fast and effortless drilling thanks to FLOWSTEP® tip - easy and smooth drilling process - 3-face shank prevents spinning in the drill chuck - ideally suited for use on round surfaces such as pipes The FLOWSTEP® tip ensures extremely fast and effortless drilling - Smooth and quiet drilling process - 3-face shank prevents spinning in the drill chuck - Ideal for use in hand-held power tools - FLOWSTEP® technology on all steps: Smooth and seamless transition between the different diameters during the drilling process - Up to 2 times more holes due to extended tool life - Significantly improved drilling results - Extremely high wear resistance and hot hardness Technical Data: - Point angle: 118° - Step angle: 90° - Groove: spiral grooved - Number of cutting edges: 2For commercial use, please observe the building regulations!
CHF 44.40
-
Ruko RUKO step drill ULTIMATECUT drilling range 5-12 mm ( 4000865850 )
Fri, 10/10/2025
Scope of Delivery: - Step drill ULTIMATECUT drilling range 5-12 mm Product Description: HSS - RUnaTEC-coated - spiral fluted - with cross cut - 2 cutting edges - with FLOWSTEP® tip - point angle 118 ° - step angle 90 ° - 3-face shank - right-hand cutting - precise centring without centre punching, even on round surfaces such as pipes - extremely fast and effortless drilling thanks to FLOWSTEP® tip - easy and smooth drilling process - 3-face shank prevents spinning in the drill chuck - ideally suited for use on round surfaces such as pipes The FLOWSTEP® tip ensures extremely fast and effortless drilling - Smooth and quiet drilling process - 3-face shank prevents spinning in the drill chuck - Ideal for use in hand-held power tools - FLOWSTEP® technology on all steps: Smooth and seamless transition between the different diameters during the drilling process - Up to 2 times more holes due to extended tool life - Significantly improved drilling results - Extremely high wear resistance and hot hardness Technical Data: - Point angle: 118° - Step angle: 90° - Groove: spiral grooved - Number of cutting edges: 2For commercial use, please observe the building regulations!
CHF 34.07
-
Ruko RUKO step drill ULTIMATECUT drilling range 6 - 27 mm ( 4000865774 )
Fri, 10/10/2025
Scope of Delivery: - Step drill ULTIMATECUT drilling range 6 - 27 mm Product Description: The ULTIMATECUT step drill revolutionises the work process and sets new standards in machining time with time savings of up to 75%. The step drill from RUKO achieves this with its revolutionary cutting edge geometry by combining a wide variety of applications and tools. This means fewer tools required, no tool changes and absolute flexibility. Technical Data: - Point angle: 130° - Step angle: 90° - Groove: spiral grooved - Number of cutting edges: 4For commercial use, please observe the building regulations!
CHF 83.28
-
HELLER HELLER porcelain stoneware drill Cera Expert Accuspeed Ø 14 mm total length 80 mm ( 4000864426 )
Fri, 10/10/2025
Scope of Delivery: - Porcelain stoneware drill bit Cera Expert Accuspeed Ø 14 mm Total length 80 mm Product Description: for perfect results in the hardest tiles, roof tiles and porcelain stoneware - cooling is ensured by integrated paraffin emulsion - hexagonal holder for direct mounting in all cordless drill drivers - note: not suitable for impact drilling Technical Data: - nanFor commercial use, please observe the building regulations!
CHF 32.17
-
HELLER HELLER porcelain stoneware drill bit Cera Expert Accuspeed Ø 12 mm total length 80 mm ( 4000864425 )
Fri, 10/10/2025
Scope of Delivery: - Porcelain stoneware drill bit Cera Expert Accuspeed Ø 12 mm Total length 80 mm Product Description: for perfect results in the hardest tiles, roof tiles and porcelain stoneware - cooling is ensured by integrated paraffin emulsion - hexagonal holder for direct mounting in all cordless drill drivers - note: not suitable for impact drilling Technical Data: - nanFor commercial use, please observe the building regulations!
CHF 31.14
-
HELLER HELLER porcelain stoneware drill bit Cera Expert Accuspeed Ø 10 mm total length 80 mm ( 4000864424 )
Fri, 10/10/2025
Scope of Delivery: - Porcelain stoneware drill bit Cera Expert Accuspeed Ø 10 mm Total length 80 mm Product Description: for perfect results in the hardest tiles, roof tiles and porcelain stoneware - cooling is ensured by integrated paraffin emulsion - hexagonal holder for direct mounting in all cordless drill drivers - note: not suitable for impact drilling Technical Data: - nanFor commercial use, please observe the building regulations!
CHF 30.07
-
HELLER HELLER porcelain stoneware drill bit Cera Expert Accuspeed Ø 8 mm total length 67 mm ( 4000864423 )
Fri, 10/10/2025
Scope of Delivery: - Porcelain stoneware drill bit Cera Expert Accuspeed Ø 8 mm Total length 67 mm Product Description: for perfect results in the hardest tiles, roof tiles and porcelain stoneware - cooling is ensured by integrated paraffin emulsion - hexagonal holder for direct mounting in all cordless drill drivers - note: not suitable for impact drilling Technical Data: - nanFor commercial use, please observe the building regulations!
CHF 29.01
-
HELLER HELLER porcelain stoneware drill bit Cera Expert Accuspeed Ø 6 mm total length 67 mm ( 4000864422 )
Fri, 10/10/2025
Scope of Delivery: - Porcelain stoneware drill bit Cera Expert Accuspeed Ø 6 mm Total length 67 mm Product Description: for perfect results in the hardest tiles, roof tiles and porcelain stoneware - cooling is ensured by integrated paraffin emulsion - hexagonal holder for direct mounting in all cordless drill drivers - note: not suitable for impact drilling Technical Data: - nanFor commercial use, please observe the building regulations!
CHF 27.98
-
TRANSPAK HELLER Allmat 4-piece universal drill set Ø 5, 6, 8, 10 mm ( 4000864358 )
Fri, 10/10/2025
Scope of Delivery: - Universal drill set Allmat 4 pieces Ø 5, 6, 8, 10 mm Product Description: with round shank - optimised for use in cordless drills - easy drilling even on smooth and hard surfaces thanks to special grinding - ground outer diameter for precise drill holes Areas of application: Lightweight building materials, stone, masonry, wall tiles, plastics, metal, non-ferrous metals, coated chipboard Technical Data: - Shank: Round shankFor commercial use, please observe the building regulations!
CHF 25.19
-
HELLER HELLER ProConcrete concrete drill bit Ø 8 mm ( 4000864170 )
Fri, 10/10/2025
Scope of Delivery: - Concrete drill ProConcrete Ø 8 mm Product Description: Cylindrical shank - robust concrete & masonry drill bit with optimised carbide geometry - long service life - high speed thanks to optimised head design with wide spout and large-volume "Twinmax-G2" helix - high breaking strength thanks to special hardening/blasting technology Areas of application: Concrete, masonry, sand-lime brick, stone Technical Data: - Version: straight shankFor commercial use, please observe the building regulations!
CHF 11.30
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"