Drill Bits
-
Ruko RUKO core drill nominal Ø 25 mm ( 4000602456 )
Wed, 10/08/2025
Scope of Delivery: - Core drill nominal Ø 25 mm Product Description: Core drill made from high-performance high-speed steel. Suitable for steel (e.g. T-beams, large-format sheet metal), cast steel, non-ferrous and light metals. Technical Data: - Shank design: WeldonFor commercial use, please observe the building regulations!
CHF 48.81
-
Ruko RUKO core drill nominal Ø 24 mm ( 4000602455 )
Wed, 10/08/2025
Scope of Delivery: - Core drill nominal Ø 24 mm Product Description: Core drill made from high-performance high-speed steel. Suitable for steel (e.g. T-beams, large-format sheet metal), cast steel, non-ferrous and light metals. Technical Data: - Shank design: WeldonFor commercial use, please observe the building regulations!
CHF 48.64
-
Ruko RUKO core drill nominal Ø 20 mm ( 4000602451 )
Wed, 10/08/2025
Scope of Delivery: - Core drill nominal Ø 20 mm Product Description: Core drill made from high-performance high-speed steel. Suitable for steel (e.g. T-beams, large-format sheet metal), cast steel, non-ferrous and light metals. Technical Data: - Shank design: WeldonFor commercial use, please observe the building regulations!
CHF 41.22
-
Ruko RUKO core drill nominal Ø 18 mm ( 4000602449 )
Wed, 10/08/2025
Scope of Delivery: - Core drill nominal Ø 18 mm Product Description: Core drill made from high-performance high-speed steel. Suitable for steel (e.g. T-beams, large-format sheet metal), cast steel, non-ferrous and light metals. Technical Data: - Shank design: WeldonFor commercial use, please observe the building regulations!
CHF 38.67
-
Ruko RUKO core drill nominal Ø 17 mm ( 4000602448 )
Scope of Delivery: - Core drill nominal Ø 17 mm Product Description: Core drill made from high-performance high-speed steel. Suitable for steel (e.g. T-beams, large-format sheet metal), cast steel, non-ferrous and light metals. Technical Data: - Shank design: WeldonFor commercial use, please observe the building regulations!
-
Ruko RUKO core drill bit nominal Ø 15 mm ( 4000602446 )
Wed, 10/08/2025
Scope of Delivery: - Core drill nominal Ø 15 mm Product Description: Core drill made from high-performance high-speed steel. Suitable for steel (e.g. T-beams, large-format sheet metal), cast steel, non-ferrous and light metals. Technical Data: - Shank design: WeldonFor commercial use, please observe the building regulations!
CHF 34.71
-
Ruko RUKO core drill nominal Ø 14 mm ( 4000602445 )
Wed, 10/08/2025
Scope of Delivery: - Core drill nominal Ø 14 mm Product Description: Core drill made from high-performance high-speed steel. Suitable for steel (e.g. T-beams, large-format sheet metal), cast steel, non-ferrous and light metals. Technical Data: - Shank design: WeldonFor commercial use, please observe the building regulations!
CHF 34.53
-
Ruko RUKO core drill nominal Ø 13 mm ( 4000602444 )
Scope of Delivery: - Core drill nominal Ø 13 mm Product Description: Core drill made from high-performance high-speed steel. Suitable for steel (e.g. T-beams, large-format sheet metal), cast steel, non-ferrous and light metals. Technical Data: - Shank design: WeldonFor commercial use, please observe the building regulations!
-
Ruko RUKO core drill nominal Ø 12 mm ( 4000602443 )
Wed, 10/08/2025
Scope of Delivery: - Core drill nominal Ø 12 mm Product Description: Core drill made from high-performance high-speed steel. Suitable for steel (e.g. T-beams, large-format sheet metal), cast steel, non-ferrous and light metals. Technical Data: - Shank design: WeldonFor commercial use, please observe the building regulations!
CHF 32.79
-
Ruko RUKO core drill nominal Ø 22 mm ( 4000602399 )
Wed, 10/08/2025
Scope of Delivery: - Core drill nominal Ø 22 mm Product Description: Core drill made of high-performance high-speed steel with titanium-aluminium-nitride coating. The TiAlN wear protection coating increases the surface hardness of the tool to approx. 3,000 HV / micro hardness and the hot hardness resistance to up to 900°C. It is characterised by high toughness and high thermal and chemical stability. It is characterised by high toughness as well as high thermal and chemical stability and is used to achieve longer tool life and cutting values. Suitable for dry machining thanks to the TiAlN coating. Particularly suitable for machining unalloyed and alloyed steels (up to 1200 N/mm²), high-chromium alloyed steels such as V2A and V4A, as well as cast steel and tough brass. Technical Data: - Shank design: WeldonFor commercial use, please observe the building regulations!
CHF 48.16
-
Ruko RUKO core drill nominal Ø 18 mm ( 4000602395 )
Wed, 10/08/2025
Scope of Delivery: - Core drill nominal Ø 18 mm Product Description: Core drill made of high-performance high-speed steel with titanium-aluminium-nitride coating. The TiAlN wear protection coating increases the surface hardness of the tool to approx. 3,000 HV / micro hardness and the hot hardness resistance to up to 900°C. It is characterised by high toughness and high thermal and chemical stability. It is characterised by high toughness as well as high thermal and chemical stability and is used to achieve longer tool life and cutting values. Suitable for dry machining thanks to the TiAlN coating. Particularly suitable for machining unalloyed and alloyed steels (up to 1200 N/mm²), high-chromium alloyed steels such as V2A and V4A, as well as cast steel and tough brass. Technical Data: - Shank design: WeldonFor commercial use, please observe the building regulations!
CHF 43.47
-
Ruko RUKO core drill nominal Ø 16 mm ( 4000602393 )
Scope of Delivery: - Core drill nominal Ø 16 mm Product Description: Core drill made of high-performance high-speed steel with titanium-aluminium-nitride coating. The TiAlN wear protection coating increases the surface hardness of the tool to approx. 3,000 HV / micro hardness and the hot hardness resistance to up to 900°C. It is characterised by high toughness and high thermal and chemical stability. It is characterised by high toughness as well as high thermal and chemical stability and is used to achieve longer tool life and cutting values. Suitable for dry machining thanks to the TiAlN coating. Particularly suitable for machining unalloyed and alloyed steels (up to 1200 N/mm²), high-chromium alloyed steels such as V2A and V4A, as well as cast steel and tough brass. Technical Data: - Shank design: WeldonFor commercial use, please observe the building regulations!
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"