Direkt ist günstiger für Dich!

Wusstest du, dass Preisvergleich-Plattformen und Suchmaschinen bei jedem Kauf fett mitverdienen? Über 20 % vom Preis gehen nur für Werbung drauf – und das zahlen am Ende alle mit. Wir sagen: Nein danke und möchten die Werbekosten lieber als Preisreduktion an Euch weitergeben!

Aus diesem Grund übermitteln wir nicht mehr unseren gesamten Bestand, die Bestpreis-Angebote und Deals an die großen Plattformen und können Dir so - neben den Geschenken, BROpoints und anderen Vorteilen - wesentlich bessere Preise geben, die Du ausschließlich bei uns findest. Deswegen lohnt es sich, ohne Umwege, direkt zu uns zu kommen.

Initiative für bessere Preise und mehr Fairness im Online-Handel.

Finde hier ALLE ANGEBOTE, für die wir derzeit den Online-Bestpreis haben.

Drill Bits

Show previous products

HELLER HELLER ProConcrete concrete drill bit Ø 14 mm ( 4000864176 )

Sat, 11/29/2025

Scope of Delivery: - Concrete drill ProConcrete Ø 14 mm Product Description: Cylindrical shank - robust concrete & masonry drill bit with optimised carbide geometry - long service life - high speed thanks to optimised head design with wide spout and large-volume "Twinmax-G2" helix - high breaking strength thanks to special hardening/blasting technology Areas of application: Concrete, masonry, sand-lime brick, stone Technical Data: - Version: straight shankFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 18.06
HELLER HELLER ProConcrete concrete drill bit Ø 12 mm ( 4000864174 )

Sat, 11/29/2025

Scope of Delivery: - Concrete drill ProConcrete Ø 12 mm Product Description: Cylindrical shank - robust concrete & masonry drill bit with optimised carbide geometry - long service life - high speed thanks to optimised head design with wide spout and large-volume "Twinmax-G2" helix - high breaking strength thanks to special hardening/blasting technology Areas of application: Concrete, masonry, sand-lime brick, stone Technical Data: - Version: straight shankFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 13.92
HELLER HELLER ProConcrete concrete drill bit Ø 10 mm ( 4000864172 )

Sat, 11/29/2025

Scope of Delivery: - Concrete drill ProConcrete Ø 10 mm Product Description: Cylindrical shank - robust concrete & masonry drill bit with optimised carbide geometry - long service life - high speed thanks to optimised head design with wide spout and large-volume "Twinmax-G2" helix - high breaking strength thanks to special hardening/blasting technology Areas of application: Concrete, masonry, sand-lime brick, stone Technical Data: - Version: straight shankFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 12.13
HELLER HELLER ProConcrete concrete drill bit Ø 6 mm ( 4000864168 )

Sat, 11/29/2025

Scope of Delivery: - Concrete drill ProConcrete Ø 6 mm Product Description: Cylindrical shank - robust concrete & masonry drill bit with optimised carbide geometry - long service life - high speed thanks to optimised head design with wide spout and large-volume "Twinmax-G2" helix - high breaking strength thanks to special hardening/blasting technology Areas of application: Concrete, masonry, sand-lime brick, stone Technical Data: - Version: straight shankFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 10.56
HELLER HELLER ProConcrete concrete drill bit Ø 5 mm ( 4000864165 )

Sat, 11/29/2025

Scope of Delivery: - Concrete drill ProConcrete Ø 5 mm Product Description: Cylindrical shank - robust concrete & masonry drill bit with optimised carbide geometry - long service life - high speed thanks to optimised head design with wide spout and large-volume "Twinmax-G2" helix - high breaking strength thanks to special hardening/blasting technology Areas of application: Concrete, masonry, sand-lime brick, stone Technical Data: - Version: straight shankFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 10.30
HELLER HELLER ProConcrete concrete drill bit Ø 3 mm ( 4000864163 )

Sat, 11/29/2025

Scope of Delivery: - Concrete drill ProConcrete Ø 3 mm Product Description: Cylindrical shank - robust concrete & masonry drill bit with optimised carbide geometry - long service life - high speed thanks to optimised head design with wide spout and large-volume "Twinmax-G2" helix - high breaking strength thanks to special hardening/blasting technology Areas of application: Concrete, masonry, sand-lime brick, stone Technical Data: - Version: straight shankFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 10.24
Ruko RUKO twist drill DIN 338 type N nominal Ø 11.5 mm ( 4000600244 )

Sat, 11/29/2025

Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 11.5 mm Product Description: HSS - DIN 338 - type N - point angle 118 ° - right-hand cutting - taper ground, cross ground from Ø 2.0 mm in accordance with DIN 1412 C - the fully ground twist drill has increased concentricity - for steel, alloyed and unalloyed cast steel (up to 900 N/mm² strength), Grey cast iron, malleable cast iron, nodular cast iron and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass and bronze - High-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.2 mm/rev - Quality: profile ground - Nominal Ø tolerance: h8For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 24.80
Ruko RUKO twist drill DIN 338 type N nominal Ø 10.5 mm ( 4000600234 )

Sat, 11/29/2025

Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 10.5 mm Product Description: HSS - DIN 338 - type N - point angle 118 ° - right-hand cutting - taper ground, cross ground from Ø 2.0 mm in accordance with DIN 1412 C - the fully ground twist drill has increased concentricity - for steel, alloyed and unalloyed cast steel (up to 900 N/mm² strength), Grey cast iron, malleable cast iron, nodular cast iron and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass and bronze - High-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.2 mm/rev - Quality: profile ground - Nominal Ø tolerance: h8For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 21.19
Ruko RUKO twist drill DIN 338 type N nominal Ø 2.9 mm ( 4000600144 )

Sat, 11/29/2025

Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 2.9 mm Product Description: HSS - DIN 338 - type N - point angle 118 ° - right-hand cutting - taper ground, cross ground from Ø 2.0 mm in accordance with DIN 1412 C - the fully ground twist drill has increased concentricity - for steel, alloyed and unalloyed cast steel (up to 900 N/mm² strength), Grey cast iron, malleable cast iron, nodular cast iron and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass and bronze - High-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.07mm/rev - Quality: profile ground - Nominal Ø tolerance: h8For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 10.61
Ruko RUKO twist drill DIN 338 type N nominal Ø 19 mm HSS-Co5 ( 4000600111 )

Sat, 11/29/2025

Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 19 mm HSS-Co5 Product Description: HSS-Co5 - DIN 338 - type N - point angle 130 ° - profile ground - right-hand cutting - cross cut to DIN 1412 C - with stepped shank - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, tempered and case-hardened steels as well as stainless and acid-resistant steels - ideal for drilling larger drill diameters for all standard drills with a chuck up to 13.0 mm Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.14 mm/rev - Quality: profile ground - Shank length: 35mmFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 33.96
Alpen ALPEN roof tile drill Ø 4 mm total length 100 mm ( 8000448883 )

Sat, 11/29/2025

Scope of Delivery: - Roof tile drill Ø 4 mm Total length 100 mm Product Description: Carbide - shot-peened - special drill bit for rotary drilling in roof tiles, roofing tiles, Eternit, slate, ceramic, tiles, marble and granite - suitable for every standard cordless screwdriver thanks to standardised shank profile - 1/4 inch - point angle 130 ° Technical Data: - d2 Ø shank: 1/4" inch - Application: Special drill bit for rotary drilling in roof tiles, roofing tiles, Eternit, slate, ceramic, tiles, marble and granite. Suitable for every standard cordless screwdriver due to standardised shank profile. - l2 Slot length: 39mm - Shank design: hexagonal - Point angle (DE): 130° - Z Number of cutting edges: 2For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 10.97
Alpen ALPEN roof tile drill Ø 6 mm total length 100 mm ( 8000448878 )

Sat, 11/29/2025

Scope of Delivery: - Roof tile drill Ø 6 mm Total length 100 mm Product Description: Carbide - shot-peened - special drill bit for rotary drilling in roof tiles, roofing tiles, Eternit, slate, ceramic, tiles, marble and granite - suitable for every standard cordless screwdriver thanks to standardised shank profile - 1/4 inch - point angle 130 ° Technical Data: - d2 Ø shank: 1/4" inch - Application: Special drill bit for rotary drilling in roof tiles, roofing tiles, Eternit, slate, ceramic, tiles, marble and granite. Suitable for every standard cordless screwdriver due to standardised shank profile. - l2 Slot length: 54mm - Shank design: hexagonal - Point angle (DE): 130° - Z Number of cutting edges: 2For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 11.25