Only this week: 10% off all BOSCH power tools - discount will be deducted in the shopping cart

Direkt ist günstiger für Dich!Direkt ist günstiger für Dich!

Wusstest du, dass Preisvergleich-Plattformen und Suchmaschinen bei jedem Kauf fett mitverdienen? Über 20 % vom Preis gehen nur für Werbung drauf – und das zahlen am Ende alle mit. Wir sagen: Nein danke und möchten die Werbekosten lieber als Preisreduktion an Euch weitergeben!

Aus diesem Grund übermitteln wir nicht mehr unseren gesamten Bestand, die Bestpreis-Angebote und Deals an die großen Plattformen und können Dir so - neben den Geschenken, BROpoints und anderen Vorteilen - wesentlich bessere Preise geben, die Du ausschließlich bei uns findest. Deswegen lohnt es sich, ohne Umwege, direkt zu uns zu kommen.

Initiative für bessere Preise und mehr Fairness im Online-Handel.

Finde hier ALLE ANGEBOTE, für die wir derzeit den Online-Bestpreis haben.

Drill Bit Sets

1396 products

Filter

Show previous products

  • RUKO twist drill DIN 338 type N nominal Ø 2.2 mm ( 4000600135 )

    Ruko RUKO twist drill DIN 338 type N nominal Ø 2.2 mm ( 4000600135 )

    Sat, 12/06/2025

    Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 2.2 mm Product Description: HSS - DIN 338 - type N - point angle 118 ° - right-hand cutting - taper ground, cross ground from Ø 2.0 mm in accordance with DIN 1412 C - the fully ground twist drill has increased concentricity - for steel, alloyed and unalloyed cast steel (up to 900 N/mm² strength), Grey cast iron, malleable cast iron, nodular cast iron and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass and bronze - High-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.06mm/rev - Quality: profile ground - Nominal Ø tolerance: h8For commercial use, please observe the building regulations!

    Read more

    1 - 2 business days

    CHF 10.62

  • RUKO twist drill DIN 338 type INOX nominal Ø 5.8 mm ( 4000600476 )

    Ruko RUKO twist drill DIN 338 type INOX nominal Ø 5.8 mm ( 4000600476 )

    Sat, 12/06/2025

    Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 5.8 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.09mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!

    Read more

    1 - 2 business days

    CHF 24.32

  • RUKO twist drill DIN 338 type N nominal Ø 6.8 mm ( 4000600191 )

    Ruko RUKO twist drill DIN 338 type N nominal Ø 6.8 mm ( 4000600191 )

    Sat, 12/06/2025

    Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 6.8 mm Product Description: HSS - DIN 338 - type N - point angle 118 ° - right-hand cutting - taper ground, cross ground from Ø 2.0 mm in accordance with DIN 1412 C - the fully ground twist drill has increased concentricity - for steel, alloyed and unalloyed cast steel (up to 900 N/mm² strength), Grey cast iron, malleable cast iron, nodular cast iron and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass and bronze - High-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.14 mm/rev - Quality: profile ground - Nominal Ø tolerance: h8For commercial use, please observe the building regulations!

    Read more

    1 - 2 business days

    CHF 19.34

  • RUKO twist drill DIN 338 type INOX nominal Ø 5.1 mm ( 4000600467 )

    Ruko RUKO twist drill DIN 338 type INOX nominal Ø 5.1 mm ( 4000600467 )

    Sat, 12/06/2025

    Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 5.1 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.08 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!

    Read more

    1 - 2 business days

    CHF 20.21

  • RUKO twist drill DIN 338 type INOX nominal Ø 6.8 mm ( 4000600488 )

    Ruko RUKO twist drill DIN 338 type INOX nominal Ø 6.8 mm ( 4000600488 )

    Sat, 12/06/2025

    Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 6.8 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.11 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!

    Read more

    1 - 2 business days

    CHF 29.51

  • BOSCH Steinbohrer Expert HEX-9 Nenn-Ø 6 mm Arbeitslänge 60 mm ( 4000909797 )

    Options

    Bosch BOSCH Steinbohrer Expert HEX-9 Nenn-Ø 6 mm Arbeitslänge 60 mm ( 4000909797 )

    Lieferumfang:Steinbohrer Expert HEX-9 Nenn-Ø 6 mm Arbeitslänge 60 mmProduktbeschreibung:maximale Präzision beim Bohren unterschiedlicher Materialien · ideal für präzise Bohrungen in harte Materialien, wie Kacheln oder Granit, Beton, Ziegel, Holz und Metall · scharfe Spitze · Sechskantschaft für maximale Kraftübertragung in Standard-Bohrfuttern und Futtern von SechskantschraubendrehernTechnische Daten:

    Read more

    Pre-order

    CHF 10.40

    Options

  • BOSCH Steinbohrer Expert HEX-9 Nenn-Ø 5 mm Arbeitslänge 50 mm ( 4000909796 )

    Options

    Bosch BOSCH Steinbohrer Expert HEX-9 Nenn-Ø 5 mm Arbeitslänge 50 mm ( 4000909796 )

    Lieferumfang:Steinbohrer Expert HEX-9 Nenn-Ø 5 mm Arbeitslänge 50 mmProduktbeschreibung:maximale Präzision beim Bohren unterschiedlicher Materialien · ideal für präzise Bohrungen in harte Materialien, wie Kacheln oder Granit, Beton, Ziegel, Holz und Metall · scharfe Spitze · Sechskantschaft für maximale Kraftübertragung in Standard-Bohrfuttern und Futtern von SechskantschraubendrehernTechnische Daten:

    Read more

    Pre-order

    CHF 10.23

    Options

  • BOSCH masonry drill Expert CYL-9 nominal Ø 6 mm working length 60 mm ( 4000909773 )

    Bosch BOSCH masonry drill Expert CYL-9 nominal Ø 6 mm working length 60 mm ( 4000909773 )

    Sat, 12/06/2025

    Scope of Delivery: - Masonry drill Expert CYL-9 nominal Ø 6 mm working length 60 mm Product Description: maximum precision when drilling different materials - ideal for precise drilling in hard materials such as tile or granite, concrete, brick, wood and metal - sharp tip - cylindrical shank for annular gear chuck Technical Data: - nanFor commercial use, please observe the building regulations!

    Read more

    1 - 2 business days

    CHF 10.51

  • BOSCH masonry drill Expert CYL-9 nominal Ø 5 mm working length 50 mm ( 4000909772 )

    Bosch BOSCH masonry drill Expert CYL-9 nominal Ø 5 mm working length 50 mm ( 4000909772 )

    Sat, 12/06/2025

    Scope of Delivery: - Masonry drill Expert CYL-9 nominal Ø 5 mm working length 50 mm Product Description: maximum precision when drilling different materials - ideal for precise drilling in hard materials such as tile or granite, concrete, brick, wood and metal - sharp tip - cylindrical shank for annular gear chuck Technical Data: - nanFor commercial use, please observe the building regulations!

    Read more

    1 - 2 business days

    CHF 10.31

  • BOSCH Steinbohrer Expert CYL-9 Nenn-Ø 6 mm Arbeitslänge 200 mm ( 4000909775 )

    Options

    Bosch BOSCH Steinbohrer Expert CYL-9 Nenn-Ø 6 mm Arbeitslänge 200 mm ( 4000909775 )

    Lieferumfang:Steinbohrer Expert CYL-9 Nenn-Ø 6 mm Arbeitslänge 200 mmProduktbeschreibung:maximale Präzision beim Bohren unterschiedlicher Materialien · ideal für präzise Bohrungen in harte Materialien, wie Kacheln oder Granit, Beton, Ziegel, Holz und Metall · scharfe Spitze · zylindrischer Schaft für ZahnkranzbohrfutterTechnische Daten:

    Read more

    Pre-order

    CHF 16.29

    Options

  • BOSCH Steinbohrer Expert CYL-9 Nenn-Ø 3 mm Arbeitslänge 40 mm ( 4000909770 )

    Options

    Bosch BOSCH Steinbohrer Expert CYL-9 Nenn-Ø 3 mm Arbeitslänge 40 mm ( 4000909770 )

    Lieferumfang:Steinbohrer Expert CYL-9 Nenn-Ø 3 mm Arbeitslänge 40 mmProduktbeschreibung:maximale Präzision beim Bohren unterschiedlicher Materialien · ideal für präzise Bohrungen in harte Materialien, wie Kacheln oder Granit, Beton, Ziegel, Holz und Metall · scharfe Spitze · zylindrischer Schaft für ZahnkranzbohrfutterTechnische Daten:

    Read more

    Pre-order

    CHF 12.58

    Options

  • BOSCH Steinbohrer Expert CYL-9 Nenn-Ø 10 mm Arbeitslänge 80 mm ( 4000909778 )

    Options

    Bosch BOSCH Steinbohrer Expert CYL-9 Nenn-Ø 10 mm Arbeitslänge 80 mm ( 4000909778 )

    Lieferumfang:Steinbohrer Expert CYL-9 Nenn-Ø 10 mm Arbeitslänge 80 mmProduktbeschreibung:maximale Präzision beim Bohren unterschiedlicher Materialien · ideal für präzise Bohrungen in harte Materialien, wie Kacheln oder Granit, Beton, Ziegel, Holz und Metall · scharfe Spitze · zylindrischer Schaft für ZahnkranzbohrfutterTechnische Daten:

    Read more

    Pre-order

    CHF 15.06

    Options

I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"

Show more products

Log in

Forgot your password?

Don't have an account yet?
Create account